Genius MAXFIGHTER F-31U User Manual

English

Game Device Features

1.Ten function buttons include trigger

2.Eight-way view finder (Hat switch)

3.Throttle/Rudder controller

4.USB (Universal Serial Bus) interface

5.Vibration feedback function

Game Device Installation

1.Make sure you turn your computer on.

2.Insert the driver’s disc into the CD-ROM

drive, and the setup program will start automatically. If not, start the setup program manually by selecting Start/Run and type in “E:\setup”(Where “E:” represents the location of the CD-ROM drive), then press the Enter key.

3.Please follow the instructions on the screen to finish the driver installation. (Some operating systems will install the DirectX program automatically first, so just follow the instructions on the screen to finish the program installation.)

4.After the software installation is completed, you can connect your game device to the USB port on your computer.

5.Click Start / Settings / Control Panel and double click on the “Game Controllers” or “Gaming Options” icon.

6.In the “Game Controllers” or “Gaming Options” screen, you can calibrate and test your game controller before you play any game.

7.When you finish the calibration and test, you can now play any game.

Important:

1.In order to get the best effects when playing, we recommend you calibrate and test your game controller first. Especially if you reboot your PC or you re-plug in the game controller to your computer, we strongly suggest you calibrate and test your game controller again.

2.The driver will work with the DirectX 7.0a or a newer version. Please check the DirectX version on your system, and upgrade if necessary.

3.The vibration effect occurs according to game software. For details, refer to the game software manual.