Genius GF112 User Manual
English
VideoCAM GF112 Features
1 Snap Shot button
2 Lens
3 Adjustable base
Installing the VideoCAM GF112
1. Please install the driver first and then connect VideoCAM
GF112 to the USB por t.
2. Installing the VideoCAM GF112 driver
a. Insert the VideoCAM GF112 Installation CD into the CD-ROM
drive.
b. The Autorun screen will bring up the installation screen. Click on
“Driver” then simply follow the on-screen instructions.
c. Install “DirectX” from the CD.
Notice:
steps:
3. Insert the VideoCAM GF112’s USB cable to your desktop’s
or laptop’s USB port.
If the Autorun screen doesn’t start, please follow these
z Click on “Start Menu”.
z Type D：\SETUP.EXE , then click “Enter” key.
(Assume your CD-ROM is in Drive D)
-1-
English
4. Complete software and hardware installation. You can
install the software you would like for video
conferencing or chat with your friends.
NOTE
To remove the driver installation:
Windows Environment
Please go to the taskbar and follow “Start” Æ “Program” Æ “VideoCAM
GF112”Æ Click “Uninstall”, then follow the on-screen instructions to
remove the driver.
:
Genius Application (Windows Only)
You can use our software to capture the real-time image, record or
execute the simply security function.
To run the software, please go to the task bar and follow “Start”Æ
Click “Program”Æ Choose “VideoCAM GF112”Æ Click “VideoCAM
GF112”. Or you may execute the software by simply clicking the
shortcut of “VideoCAM GF112”.
-2-
English
NOTE
After installing the driver of VideoCAM GF112, the system will automatically
create a file (C:\WINDOWS\Album or C:\WINNT\Album)to save the images
you take using the Genius Application.
1. Description for the major icon
Preview mode
Snapshot mode
Video Clip Mode
Security monitoring system
Exit the Genius VideoCAM Series UI
Camera Control
NOTE
In the “camera control section”, you can personalize your camera
settings for different circumstances.
-3-
English
- You can flip the image horizontally or vertically by choosing “Image Mirror”
1
or “Image Flip”.
- When the light is not sufficient, you may click on “Low Light” to get a clear
image.
2 You can adjust different values for different circumstances and environment
You may adjust values toward image appearance. Before adjusting values, you
3
have to unclick “Auto” to unlock.
-Press “Reset” to return to the manufacturer’s settings.
4
-Press “Restore” to return to the previous settings.
-Press “Save” to save the values you set up.
Select the correct frequency according to the country where you are using the
5
web camera. (Before doing this, you will need to select “Indoor”.)
-If your web camera is located in backlight position, you may click “Backlight
6
compensation” to get a sharper image.
-You can have a black-and-white photo effect by clicking on “B/W Mode”.
-4-
Loading...