Genie Z-80-60 Product Specifications

Self-Propelled Articulating Booms

Z™-80/60

Speciﬁ cations

Model Z-80/60

Measurements US Metric

Working height maximum* 84 ft 25.77 m Platform height maximum 78 ft 23.77 m Horizontal reach maximum 60 ft 18.29 m Up and over clearance maximum 29 ft 8.83 m Below ground reach 15 ft 10 in 4.83 m Platform length - 8 ft / 6 ft 3ft/2ft 6in 0.91m/0.76m

Platform width - 8 ft / 6 ft 8ft/6ft 2.44m/1.83m

Height - stowed 9 ft 10 in 3.00 m

Length - stowed 37 ft 11.27 m

Length - transport 37 ft 11.27 m

Width 8 ft 2 in 2.49 m

Wheelbase 9 ft 4 in 2.85 m

Ground clearance - center 12 in 0.30 m

Range Of Motion Z-80/60

90 ft

27.43 m

80 ft

24.38 m

70 ft

21.34 m

60 ft

18.29 m

50 ft

15.24 m

40 ft

12.19 m

30 ft

9.14 m

Productivity

Lift capacity 500 lbs 227 kg Platform rotation 160° Vertical jib rotation 135° Turntable rotation 360° continuous Turntable tailswing - riser up 3 ft 10 in 1.17 m Turntable tailswing - riser down 7 ft 4 in 2.24 m Drive speed - stowed 3.0 mph 4.83 km/h Drive speed - raised** 0.68 mph 1.1 km/h Lift speed to full height 76 sec Gradeability - 2WD - stowed*** 30% Gradeability - 4WD - stowed*** 45% Turning radius - 2WS inside 14 ft 6 in 4.42 m Turning radius - 2WS outside 24 ft 6 in 7.47 m Turning radius - 4WS inside 7 ft 2.13 m Turning radius - 4WS outside 15 ft 4.57 m Controls 12 V DC proportional Tires 18-625 NHS

Power

Power source Continental TME27 4 cylinder gas/LPG 74 hp (55 kW) T4i Deutz TD 2011 L04i 4 cylinder diesel 74 hp (55 kW)

T4i Perkins 804D-33 4 cylinder diesel 63 hp (47 kW) Auxiliary power unit 12 V DC Hydraulic tank capacity 45 gal 170 L Fuel tank capacity – diesel machines 35 gal 132 L Fuel tank capacity – gas/LPG machines 30 gal 114 L

20 ft

6.1 m

10 ft

3.05 m

0 ft

0 m

-10 ft

-3.05 m

-20 ft

-6.1 m

-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft

-3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m

* The metric equivalent of working height adds 2 m to platform height.

U.S. adds 6 ft to platform height.

** In lift mode (platform raised), the machine is designed to operate on firm,

level surfaces only.

*** Gradeability applies to driving on slopes. See operator’s manual for details

regarding slope ratings.

**** Weight will vary depending on options and/or country standards.

Weight****

2WS 35,900 lbs 16,284 kg 4WS 37,500 lbs 17,010 kg

Standards Compliance « ANSI A92.5, CSA B354.4, EN 280, AS 1418.10

www.genielift.com

Self-Propelled Articulating Booms

Z™-80/60

Features

Measurements

• 84 ft (25.77 m) working height

• 60 ft (18.28 m) horizontal reach

• 29 ft (8.83 m) up and over clearance

• Up to 500 lbs (227 kg) lift capacity

Productivity

• 6 ft (1.83 m) jib

• Self-leveling platform

• 160° hydraulic platform rotation

• Proportional joystick controls

• Hydraulic oil cooler

• Drive enable

• AC power cord to platform

• Horn

• Hour meter

• Tilt alarm

• Descent alarm

• 360° continuous turntable rotation

• Positive traction drive

• Two speed wheel motors

• Four steering modes: front, rear, crab and coordinated

• Configurable controls to limit lift height to 70 ft

Power

• 12 V DC auxiliary power

• Anti-restart engine protection

• Auto engine fault shutdown

• On board full diagnostic and engine monitoring display

• Block heater (Continental engine)

• Dual battery

Easily Conﬁ gured To Meet Your Needs Standard Features

Platform Options

• Steel 8 ft (2.44 m) (standard)

• Steel 6 ft (1.83 m)

• Steel 8 ft (2.44 m) tri-entry

Jib

• 6 ft (1.83 m) jib boom

Engine Options

• 74 hp (55 kW) Continental gas/LPG

• 74 hp (47 kW) Deutz T4i diesel

• 63 hp (55 kW) Perkins T4i diesel

Drive/Steer Options

• 4WD (standard)

• 2WS (standard)

• 4WS

Axle

• Active oscillation

Tire Options

• Rough terrain foam-filled (standard)

• Rough terrain non-marking foam-filled

• High flotation air-filled rough terrain

Options & Accessories

Productivity Options

• Platform swing gate

• Half-mesh platform inserts with swing gate

• Platform top auxiliary rail

• Welder package

• Welder Ready package

• Weld leads to platform

• Air line to platform

• Biodegradable hydraulic oil

• Hostile environment kit

• Deluxe hostile environment kit

• Aircraft protection package (6 ft platform only)

• Thumb rocker steer

• Tool tray

• Pipe cradles (pair)

• Alarm package

• Lockable platform control box covers

• Work light package

• Operator Protective Structure

Power Options

• AC generator packages (110V/60Hz 220V/50Hz, 3000W)

• Cold Weather Packages

• Diesel catalytic scrubber muffler

• LPG tank only, steel, 33.5 lbs (15.19 kg) capacity

Genie United States

18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730

Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475

Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.

Z80 0210L. Part No. 109365

Distributed By:

www.genielift.com