Genie Z-45 XC, Z-60, Z-62, S-40, S-80 Operator's Manual
S® and Z® Booms
Operator's Manual Supplement
Panel Cradle
Original Instructions
Second Edition
First Printing
Part No. 1299254GT
Operator's Manual Supplement Second Edition • First Printing
Introduction
Introduction
Important
Read, understand and obey these safety rules and
operating instructions before operating t his
machine. Only trained and authorized personnel
shall be permitted to operate this machin e. This
manual should be considered a permanent part of
your machine and should remain with the mac hi ne
at all times. If you have any questions, contact us.
Contact Us:
Internet: www.genielift.com
E-mail: awp.techpub@terex.com
Modification Approval:
These instructions constitute authorization to
modify a Genie machine listed below by attaching
hardware to the platform rails for the purpose of
lifting solid panels, provided the criteria herein is
strictly adhered to.
Models approved for use in ANSI market:
Z-45 XC Z-60 Z-62
Z-80 ZX-135 S-40/45 XC
S-60/65 XC S-60X S-60/65 TRAX
S-80/85 XC S-80X S-80/85 HF
SX-105 XC SX-125 XC SX-135 XC
Z-45/25 DC/BE (to serial number Z4525F-62000)
Models approved for use in CE market:
Z-45 XC Z-60 Z-62
Z-80 S-40/45 XC S-60/65 XC
S-60/65 TRAX S-80/85 XC SX-105 XC
SX-125 XC SX-135 XC
Do not install a panel cradle
assembly on any Genie boom
product other than the
designated models.
Copyright © 2020 by Terex Corporation
Second Edition: First Printing February 2020
Genie, "S" and "Z" are registered trademarks of Terex South
Dakota, Inc. in the U.S.A. and many other countries.
"XC" is a trademark of Terex South Dakota, Inc.
These machines comply with
ANSI/SAIA 92.20
Complies with EC Directive 2006/42/EC
See EC Declaration of Conformity
2 Panel Cradle S
®
and Z® Booms Part No. 1299254GT
Second Edition • First Printing Operator's Manual Supplement
Installation Instructions
Installation Instructions
Observe and Obey:
This procedure shall be completed by a person
authorized to install the Panel Cradle.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Starting Installation:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual.
Be sure that all necessary tools and parts are
available and ready for use.
Read this procedure completely and adhere t o
the instructions. Attempting shortcuts m ay
produce hazardous conditions.
Part No. 1299254GT Panel Cradle S
®
and Z® Booms 3
Loading...