Self-Propelled Articulating Booms
Z™-33/18
Specifications
Model Z-33/18
Measurements US Metric
Working height maximum* 38 ft 10 in 12 m
Platform height maximum 32 ft 10 in 10 m
Horizontal reach maximum 18 ft 3 in 5.57 m
Up and over clearance maximum 14 ft 1 in 4.28 m
Platform length 2 ft 6 in 0.76 m
A
Platform width 3 ft 10 in 1.17 m
B
Height - stowed 6 ft 6 in 1.98 m
C
Length - stowed 13 ft 8 in 4.17 m
D
Width 4 ft 11 in 1.50 m
E
Wheelbase 6 ft 3 in 1.90 m
F
Ground clearance - center 6.0 in 15.2 cm
G
Productivity
Lift capacity 440 lbs 200 kg
Turntable rotation 400° non-continuous
Turntable tailswing at counterweight zero zero
Turntable tailswing - riser up 0.15 m 5.2 in
Turntable tailswing - riser down 1.16 m 3 ft 10 in
Drive speed - stowed 3.7 mph 6 km/h
Drive speed - raised retracted** 0.47 mph 0.76 km/h
Drive speed - raised extended** 0.14 mph 0.23 km/h
Gradeability - stowed*** 30%
Turning radius - inside 6 ft 3 in 1.9 m
Controls 24V DC proportional
Tires (solid rubber, non-marking, treaded) 22x9x17 in 56x23x43 cm
Range Of Motion Z-33/18
Power
Power source 48 V DC (eight 6 V X 8 batteries 315 Ah capacity)
Drive system 48 V 3 phase AC
Auxiliary power unit 24 V DC 24 V DC
Hydraulic tank capacity 6 gal 20.8 L
Weight****
8,080 lbs 3,665 kg
Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10
A
E
D
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.
B
C
G
F
Effective Date: February, 2015. Product specications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual
for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2015 Terex Corporation.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Distributed By:
Features
www.genielift.com
Self-Propelled Articulating Booms
Z™-33/18
Measurements
• 38 ft 10 in (12 m) working height
• 18 ft 3 in (5.57 m) horizontal reach
• 14 ft 1 in (4.28 m) up and over clearance
• Up to 440 lbs (200 kg) lift capacity
Productivity
• Alarm package
• 4 ft 11 in (1.50 m) width
• 6 ft 3 in (1.9 m) inside turning radius
• Self-leveling platform
• Fast Mast
• Proportional joystick controls
• Thumb rocker steer
• Drive enable
• Horn
• Hour meter
• Tilt alarm
• Descent & travel alarms
• 400° non-continuous turntable rotation
• Variable speed high efficiency hydraulic
power unit
• AC electric drive system
• Traction control
• On board easy to understand diagnostics
• AC power cord to platform
™
System
Easily Configured To Meet Your Needs Standard Features
Platform
• Aluminum 3 ft 10 in (1.17 m)
Power
• 48 V DC (eight 6 V 350 Ah batteries)
Drive
• 2 x 4 Electric AC
Tires
• Solid rubber non-marking
Options & Accessories
Productivity
• Air line to platform
• Work lights package
(2 on chassis, 2 on platform)
• Lockable platform control box cover
Power
• 48 V DC deep cycle battery pack
• 24 V DC auxiliary power
• Universal 30A battery smart charger
• Battery charge indicator
• Low battery voltage interrupt
Z34N 0210L. Part No. 109358