Genie WIP1VD User Manual
Notes on Safety
Please use the specified power supply to connect.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate it incase temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This is product instructions not quality warranty. We may reserve the rights of amending
the typographical errors, inconsistencies with the latest version, software upgrades and
product improvements, interpretation and modification. These changes will be published
in the latest version without special notification.
When this product is in use, the relevant contents of Microsoft, Apple and Google will
be involved in. The pictures and screenshots in this manual are only used to explain the
usage of our product. The ownerships of trademarks, logos and other intellectual
properties related to Microsoft, Apple and Google belong to the above-mentioned
companies.
This manual is suitable for network camera. All pictures and examples used in the
manual are for reference only.
Table of Contents
1 Introduction ................................................................................................................... 1
2 IE Remote Access ........................................................................................................... 2
2.1 LAN ................................................................................................................................................ 2
2.1.1 Access through IP-Tool .................................................................................................. 2
2.1.2 Directly Access through IE ............................................................................................. 3
2.2 WAN ............................................................................................................................................... 5
3 Remote Preview ............................................................................................................. 7
3.1 The Remote Preview Interface ........................................................................................................ 7
3.2 Playback .......................................................................................................................................... 8
3.3 Snap Pictures................................................................................................................................... 8
4 Remote Live Surveillance ............................................................................................ 10
4.1 System Configuration.................................................................................................................... 10
4.1.1 Basic Information ................................ ................................ ......................................... 10
4.1.2 Date & Time ................................................................................................................. 10
4.2 Video Configuration ...................................................................................................................... 11
4.2.1 Camera ......................................................................................................................... 11
4.2.2 Video Stream ................................................................................................................ 12
4.2.3 OSD Configuration ....................................................................................................... 13
4.2.4 Video Mask .................................................................................................................. 13
4.2.5 ROI Configuration ........................................................................................................ 14
4.3 Alarm Configuration ..................................................................................................................... 15
4.3.1 Motion Detection Area ................................................................................................. 15
4.3.2 Motion Detection Trigger ............................................................................................. 15
4.3.3 Motion Detection Schedule........................................................................................... 16
4.3.4 Alarm Server ................................................................................................................ 16
4.4 Network Configuration ................................................................................................................. 17
4.4.1 Port ............................................................................................................................... 17
4.4.2 IP Address ..................................................................................................................... 17
4.4.3 Server Configuration .................................................................................................... 18
4.4.4 IP Notify ....................................................................................................................... 18
4.4.5 DDNS Configuration .................................................................................................... 19
4.4.6 RTSP ............................................................................................................................ 20
4.4.7 UPNP ........................................................................................................................... 20
4.4.8 Mail configuration ........................................................................................................ 20
4.4.9 FTP Setting ................................................................................................................... 21
4.5 Advanced Configuration ............................................................................................................... 22
4.5.1 User Configuration ....................................................................................................... 22
4.5.2 Security Configuration.................................................................................................. 23
4.5.3 Configure Backup & Restore ........................................................................................ 24
4.5.4 Reboot .......................................................................................................................... 24
4.5.5 Upgrade ................................................................ ........................................................ 25
Appendix ................................................................................................................................ 26
Network Camera User Manual
Appendix 1 Q & A ................................................................................................................................... 26
Appendix 2 Specifications ........................................................................................................................ 27
1
Network Camera User Manual
1 Introduction
This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It
adopts state of the art video processing chips. It utilizes most advanced technologies, such as
video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to
ensure this system more stable and reliable.
This product is widely used in banks, telecommunication systems, electricity power
departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an ideal
choice for surveillance sites with middle or high risks.
Main Features
720P（1280 × 720）full real time coding
ICR auto switch, true day/night
3D DNR, digital WDR
ROI coding
Support smart phone, iPad, remote monitoring
Surveillance Application
2
Network Camera User Manual
2 IE Remote Access
You may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example.
The details are as follows:
2.1 LAN
In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access
through IE browser.
2.1.1 Access through IP-Tool
Network connection:
① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
② Double click the IP-Tool icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as the computer’s. Please modify the IP address
of your device according to the practical situation.
3
Network Camera User Manual
For example, the IP address of your computer is 192.168.13.4. So the IP address of the camera
shall be changed to 192.168.13.X. After modification, please input the password of the
administrator and click “Modify” button to modify the setting.
④ Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. IE browser will auto download the Active X control. After downloading, a login
window will pop up as shown below.
Input the username and password to log in.
2.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
You may use the above default settings when you log in the camera for the first time. You may
directly connect the camera to the computer through network cable.
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
4
Network Camera User Manual
① Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Select “Property” and then select internet protocol according to the actual situation (for
example: IPV4). Next, click “Property” button to set the network of the PC.
5
Network Camera User Manual
② Open the IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
③ After downloading Active X control, the login dialog box will pop up.
④ Input the default username and password and then enter to view.
2.2 WAN
Access through the router or virtual server
① Make sure the camera is well connected via LAN and then log in the camera via LAN and
go to ConfigNetwork ConfigPort menu to set the port number.
② Go to Config Network ConfigIP Address menu to modify the IP address.
Port Setup IP Setup
③ Go to the router’s management interface through IE browser to forward the IP address and
port of the camera in the “Virtual Server”.
Router Setup
④ Open the IE browser and input its WAN IP and http port to access.
6
Network Camera User Manual
Access through PPPoE dial-up
Network connection
You may access the camera through PPPoE auto dial-up. The setting steps are as follow:
① Go to ConfigNetwork ConfigPort menu to set the port number.
② Go to Config Network ConfigIP Address menu. Check “PPPoE” and then input the
user name and password which you can get from your internet service provider.
③ Go to Config Network ConfigDDNS Config menu. Before you configure the DDNS,
please apply for a domain name first. Please refer to 4.4.5 DDNS Configuration for detail
information.
④ Open the IE browser and input the domain name and http port to access.
Access through static IP
Network connection
The setting steps are as follow:
① Go to ConfigNetwork ConfigPort menu to set the port number.
② Go to Config Network ConfigIP Address menu to set the IP address. Check “Use the
following IP address” and then input the static IP address and other parameters.
③ Open the IE browser and input its WAN IP and http port to access.
7
Network Camera User Manual
3 Remote Preview
3.1 The Remote Preview Interface
When motion detection alarm is triggered, the people icon will turn red.
Right click to pop up a pull-down list as shown below:
Stream: Three streams are optional.
Turn off the live: Click this item to close present live preview.
Full screen: The live preview picture will be full-screen display. Double click or click right
mouse to return to the previous interface.
1
People icon
4
Zoom in
7
Start recording
2
Fix size
5
Zoom out
8
Playback
3
Actual size
6
Full screen
9
Snap
Loading...