Genie S-80X, S-85 Product Specifications

Self-Propelled Telescopic Booms

S™-80 X & S™-85

Speciﬁ cations

Models S-80 X S-85

Measurements US Metric US Metric

Working height maximum* 86 ft 26.20 m 91 ft 27.70 m Platform height maximum 80 ft 24.40 m 85 ft 25.90 m Horizontal reach maximum 71 ft 6 in 21.80 m 76 ft 6 in 23.30 m Below ground reach 6 ft 1 in 1.85 m 9 ft 6 in 2.89 m Platform length - 8 ft model 3 ft 0.91 m 3 ft 0.91 m

Platform length - 6 ft model 2 ft 6 in 0.76 m 2 ft 6 in 0.76 m Platform width - 8 ft model 8 ft 2.44 m 8 ft 2.44 m

Platform width - 6 ft model 6 ft 1.83 m 6 ft 1.83 m Height - stowed 9 ft 2 in 2.80 m 9 ft 2 in 2.80 m

Length - stowed 36 ft 6 in 11.10 m 40 ft 12.20 m

Length - transport (jib tucked under) ——— ——— 38 ft 11.60 m Width 8 ft 2 in 2.50 m 8 ft 2 in 2.50 m

Wheelbase 9 ft 4 in 2.80 m 9 ft 4 in 2.80 m

Ground clearance - center 15.8 in 0.40 m 15.8 in 0.40 m

Productivity

Lift capacity 500 lb/ 1000 lb 227 kg/ 454 kg 500 lbs 227 kg Platform rotation 160° 160° Vertical jib rotation ——— 135° Turntable rotation 360° continuous 360° continuous Turntable tailswing 4 ft 8 in 1.42 m 4 ft 8 in 1.42 m Drive speed - stowed - 2WD/4WD 3.3 mph 5.3 km/h 3.3 mph 5.3 km/h

- raised/extended 0.65 mph 1.0 km/h 0.65 mph 1.0 km/h Gradeability - 2WD - stowed** 30% 30%

- 4WD - stowed** 45% 45% Turning radius: inside 12 ft 3.70 m 12 ft 3.70 m

outside 21 ft 6 in 6.60 m 21 ft 6 in 6.60 m Controls 12V DC proportional 12V DC proportional Tires - RT lug Foam filled 18-625, 16 ply Foam filled 18-625, 16 ply

Range Of Motion S-80 X

Unrestricted

outreach zone

(

Restricted

capacity zone

(

1,000 lb capacity

500 lb capacity

)

Range Of Motion S-85 (500 lb capacity)

Power

Power source 74 hp (55 kW) Deutz turbo diesel T4i TD2011L04i 63 hp (47 kW) Perkins diesel T4i 804D-33 74 hp (55 kW) Continental gas/LPG TME27 Auxiliary power unit 12V DC 12V DC Hydraulic tank capacity 40 gal 150 L 40 gal 150 L Fuel tank capacity - diesel 35 gal 132 L 35 gal 132 L

- gas/LPG 30 gal 113.6 L 30 gal 113.6 L

Weight***

2WD 35,400 lbs 16,057 kg 37,900 lbs 17,191 kg 4WD 35,500 lbs 16,102 kg 38,000 lbs 17,236 kg

Standards Compliance ANSI A92.5, CSA B354.4,EN 280, AS 1418.10

A A

E E

D D

C C

G G

F F

B B

www.genielift.com

* The metric equivalent of working height adds 2 m to platform

height. U.S. adds 6 ft to platform height.

** Gradeability applies to driving on slopes. See operator’s manual

for details regarding slope ratings.

*** Weight will vary depending on options and/or country standards.

Self-Propelled Telescopic Booms

S™-80 X & S™-85

Features

Measurements

S-80 X*

• 86 ft (26.38 m) working height

• 71 ft 6 in (21.8 m) horizontal reach

• 500 lbs (227 kg) unrestricted and

1000 lbs (454 kg) restricted lift capacity

S-85

• 91 ft (27.90 m) working height

• 76 ft 6 in (23.3 m) horizontal reach

• 500 lbs (227 kg) lift capacity

Productivity

• Self-leveling platform

• 160° hydraulic platform rotation

• Proportional joystick controls

• Drive enable

• AC power cord to platform

• Horn

• Hour meter

• Tilt alarm

• Descent alarm

• 360° continuous turntable rotation

• Positive traction drive

• Two speed wheel motors

Power

• 12V DC auxiliary power

• Anti-restart engine protection

• Auto engine fault shutdown

• Catalytic converter muffler

(Continental engine only)

• Engine block heater

(Continental engine only)

Easily Conﬁ gured To Meet Your Needs Standard Features

Platform Options

• Steel 8 ft (2.44 m) (standard)

• Steel 6 ft (1.83 m)

• Steel 8 ft (2.44 m) tri-entry

Jib Options

• Non-jib (S-80 only)

• 5 ft (1.52 m) jib boom (S-85 only)

Engine Options

• 74 hp (55 kW) Deutz turbo diesel T4i (standard)

• 63 hp (47 kW) Perkins diesel T4i

• 74 hp (55 kW) Continental gas/LPG

Drive Options

• 2WD

• 4WD (standard)

Axle

• Active oscillation

Tire Options

• Rough terrain foam-filled (standard)

• Rough terrain non-marking foam-filled

• High floatation air-filled (Increases width by 4 in)

Options & Accessories

Productivity Options

• Platform swing gate

• Half mesh platform inserts with swing gate

• Platform top auxiliary rail

• Welder Ready package

• Weld leads to platform

• Air line to platform

• Hydraulic oil cooler

• Biodegradable hydraulic oil

• Hostile environment kit

• Deluxe hostile environment kit

• Aircraft protection package (6 ft platform only)

• Thumb rockersteer

• Tool tray

• Alarm package

• Panel cradle package (tri-entry platform)

• Lockable platform control box covers

• Tow package

• Work light package

• Operator Protective Structure

Power Options

• Engine gauge package

• AC generator packages (110V/-220V/50Hz, 3000W)

• Cold Weather Packages

• Diesel scrubber/spark arrestor muffler (catalytic muffler)

• LPG tank only, steel, 33.5 lbs (15.19 kg) capacity

• Intake air pre-cleaner

* Not available on CE machines

Genie United States

18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730

Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475

Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.

S80 0210A. Part No. 127276

Distributed By:

www.genielift.com