Page 1
Self-Propelled Telescopic Booms
S™-60 X, S™-60 XC & S™-65
Specifi cations
Models S-60 X / S-60 XC S-65
Measurements US Metric US Metric
Working height maximum* 64 ft 4 in 19.79 m 71 ft 21.80 m
Platform height maximum 58 ft 4 in 17.79 m 65 ft 19.80 m
Horizontal reach maximum 50 ft 10 in 15.48 m 56 ft 2 in 17.10 m
Below ground reach 5 ft 7 in 1.70 m 8 ft 11 in 2.72 m
Platform length 3 ft 0.91 m 3 ft 0.91 m
A
Platform width 8 ft 2.44 m 8 ft 2.44 m
B
Height - stowed 8 ft 11 in 2.72 m 8 ft 11 in 2.72 m
C
Height - stowed Trax 9 ft 1 in 2.77 m 9 ft 1 in 2.77 m
Length - stowed 27 ft 9 in 8.46 m 30 ft 11 in 9.42 m
D
Length - transport (jib tucked under) ——— ——— 25 ft 7.60 m
Width (with standard tires) 8 ft 2 in 2.49 m 8 ft 2 in 2.49 m
E
Width - Trax 8 ft 6 in 2.59 m 8 ft 6 in 2.59 m
Wheelbase 8 ft 3 in 2.51 m 8 ft 3 in 2.51 m
F
Ground clearance - center 1 ft 2.5 in 0.37 m 1 ft 2.5 in 0.37 m
G
- Trax center 1 ft 5 in 0.43 m 1 ft 5 in 0.43 m
Productivity
Lift capacity - X 500 lbs/1000 lbs 227 kg/454 kg 500 lbs 227 kg
- XC 750 lbs/1250 lbs 340 kg/680 kg
Platform rotation 160° 160°
Vertical jib rotation —— 135°
Turntable rotation 360° continuous 360° continuous
Turntable tailswing 4 ft 1.22 m 4 ft 1.22 m
Drive speed - 4WD stowed 3.0 mph 4.8 km/h 3.0 mph 4.8 km/h
- Trax stowed 2.3 mph 3.7 km/h 2.3 mph 3.7 km/h
- raised or extended 0.68 mph 1.1 km/h 0.68 mph 1.1 km/h
Gradeability - 2WD - stowed** 30% 30%
- 4WD - stowed** 45% 45%
Turning radius - inside 7 ft 9 in 2.36 m 7 ft 9 in 2.36 m
- outside 18 ft 2 in 5.54 m 18 ft 9 in 5.72 m
- Trax option inside 12 ft 3.66 m 12 ft 3.66 m
- Trax option outside 22 ft 3 in 6.78 m 22 ft 3 in 6.78 m
Controls 12 V DC proportional 12 V DC proportional
Tires - RT Lug 355/55D 625 355/55D 625
Power
Power source 48 hp (35.79 kW) Deutz diesel T4f D2.9L4
48 hp (35.79 kW) Perkins diesel T4f 404F-22
74 hp (55 kW) Deutz turbo diesel T4i D2011L04i
75 hp (56 kW) Ford gas/LPG MSG425
Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 45 gal 170 L 45 gal 170 L
Fuel tank capacity - diesel 35 gal 132 L 35 gal 132 L
- gas 30 gal 113.6 L 30 gal 113.6 L
Weight***
2WD 20,570 lbs 9,330 kg 22,100 lbs 10,024 kg
4WD 20,740 lbs 9,408 kg 22,270 lbs 10,102 kg
Trax 25,430 lbs 11,535 kg 26,960 lbs 12,229 kg
XC**** 21,967 lbs 9,964 kg
Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10
A A
E E
B B
Range Of Motion S-60 X
Unrestricted
outreach zone
(
500 lb capacity
Restricted
capacity zone
(
1,000 lb capacity
)
Range Of Motion S-65 (500 lb capacity)
70 ft
21.34 m
60 ft
18.29 m
50 ft
15.24 m
40 ft
12.19 m
30 ft
9.14 m
20 ft
6.1 m
10 ft
3.05 m
0 ft
0 m
-10 ft
-3.05 m
-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft
-3.05m 0 m 3.05 m 6.10 m 9.14 m 12.2 m 15.24 m 18.29 m
* The metric equivalent of working height adds 2 m to platform
height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes, see operator’s manual
for details regarding slope ratings.
*** Weight will vary depending on slope, see operator’s manual for
details regarding slope ratings.
**** S-60 XC not available with track system
)
D D
C C
F F
www.genielift.com
GG
Page 2
Self-Propelled Telescopic Booms
S™-60 X, S™-60 XC & S™-65
Features
Measurements
S-60 X
• 64 ft 4 in (19.79 m) working height
• 50 ft 10 in (15.48 m) horizontal reach
• 500 lbs (227 kg) unrestricted and
1000 lbs (454 kg) restricted lift capacity
S-60 XC
• 64 ft 4 in (19.79 m) working height
• 50 ft 10 in (15.48 m) horizontal reach
• 750 lbs (340 kg) unrestricted and
1250 lbs (680 kg) restricted lifting capacity
S-65
• 71 ft (21.80 m) working height
• 56 ft 2 in (17.10 m) horizontal reach
• 500 lbs (227 kg) lift capacity
Productivity
• Self-leveling platform
• 160° hydraulic platform rotation
• Proportional joystick controls
• Fuel select switch on platform and ground
control panels (Gas/LPG models)
• Drive enable
• AC power cord to platform
• Horn
• Hour meter
• Tilt alarm
• Descent alarm
• 360° continuous turntable rotation
• Positive traction drive
• Two speed wheel motors
Power
• 12 V DC auxiliary power
• Anti-restart engine protection
• Auto engine fault shutdown
• Swing out engine tray
• Intake air heater (Deutz engine)
Easily Confi gured To Meet Your Needs Standard Features
Platform Options
• Steel 8 ft (2.44 m) (standard)
• Steel 6 ft (1.83 m)
• Steel 8 ft (2.44 m) tri-entry
• Steel 4 ft (1.22 m)
Jib Options
• Non-jib (S-60 only)
• 5 ft (1.52 m) jib boom (S-65 only)
Engine Options
• 48 hp (35.79 kW) Deutz diesel T4f*
(standard)
• 48 hp (35.79 kW) Perkins diesel T4f*
• 74 hp (55 kW) Deutz turbo diesel T4i**
• 75 hp (56 kW) Ford gas/LPG
Drive Options
• 2WD
• 4WD (standard)
Axle Options
• Active oscillation (4WD)
• Non-oscillating (2WD)
Tire Options
• Rough terrain air-filled (standard)
• Rough terrain foam-filled
• Rough terrain non-marking
(air or foam-filled)
• High flotation air-filled
• Sealant treated air-filled
• Trax (track system)
Options & Accessories
Productivity Options
• Platform swing gate
• Half-mesh platform inserts with
swing gate
• Platform top auxiliary rail
• Welder Ready package
• Weld leads to platform
• Air line to platform
• Hydraulic oil cooler
• Biodegradable hydraulic oil
• Hostile environment kit
• Deluxe hostile environment kit
• Aircraft protection package
(6 ft platform)
• Thumb rocker steer
• Tool tray
• Alarm package
• Panel cradle package (tri-entry
platform only)
• Lockable platform control box covers
• Second battery
• Tow package
• Work light package
• Operator Protective Structure
Power Options
• Engine gauge package***
• AC generator packages
(110V/-220V/50Hz, 3000W)
• Cold Weather Packages
• Diesel scrubber/spark arrestor muffler
(catalytic muffler)****
• LPG tank 33.5 lbs (15.19 kg) capacity
• Intake air pre-cleaner****
* Also available as Tier 4i in limited regions
** Available only with Track system option
*** Available only with Ford engine
**** Available only with Tier4i diesel engines
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
S60 0210A. Part No. 127275
Distributed By:
www.genielift.com
Loading...