Genie Runabout with Jib Product Specifications
Aerial Work Platforms
Genie® Runabout™ with Jib
Specifi cations
Models GR-26J
Measurements US Metric
Working height* 31 ft 9 in 9.70 m
Platform height 25 ft 9 in 7.90 m
Horizontal reach maximum** 8 ft 3 in 2.51 m
Up-and-over clearance maximum 21 ft 10.5 in 6.70 m
Platform length 2 ft 5.5 in 0.75 m
A
Platform width 2 ft 11 in 0.90 m
B
Toeboard height 6 in 0.15 m
Height - stowed 6 ft 6 in 1.99 m
C
Length - stowed 9 ft 1 in 2.76 m
D
Width 3 ft 8.8 in 1.14 m
E
Wheelbase 3 ft 11 in 1.20 m
F
Ground clearance - center 3.4 in 8.5 cm
G
Productivity
Maximum platform occupancy*** 2
Lift capacity 500 lbs 227 kg
Vertical jib rotation 140° (+70°/-70°)
Turntable rotation 350° non-continuous
Turntable tailswing 1 in 25 mm
Drive speed - stowed 2.8 mph 4.5 km/h
Drive speed - raised 0.4 mph 0.65 km/h
Gradeability**** 25%
Turning radius - inside 31 in 0.78 m
Turning radius - outside 92 in 2.30 m
Controls 24V DC proportional
Drive dual rear wheel
Disc brakes dual rear wheel
Tires (solid non-marking) 16-5-11 ¼ 40.5 cm diam.
Power
Power source 24 V DC (twelve 2 V batteries, 280 Ah capacity)
Hydraulic system capacity 4.84 gal 22 L
Range Of Motion GR-26J
33 ft
10.06 m
30 ft
9.14 m
27 ft
8.23 m
24 ft
7.32 m
21 ft
6.40 m
18 ft
5.49 m
15 ft
4.57 m
12 ft
3.66 m
9 ft
2.74 m
6 ft
1.83 m
3 ft
0.91 m
0 ft
0 m
-3 ft
-0.91 m
0 ft
3 ft
0.91 m
0 m
6 ft
1.83 m
9 ft
2.74 m
12 ft
3.66 m
Weight***** 6,250 lbs 2,835 kg
Standards Compliance CE, ANSI A92.5, CSA B354.4
A
C
B
D
F
* The US equivalent of working height adds 6 ft to platform height.
** Non-working reach
*** ANSI/CSA maximum occupancy is 2 indoor and outdoor.
**** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
***** Weight will vary depending on options and/or country standards.
www.genielift.com
E
G
Aerial Work Platforms
Genie® Runabout™ with Jib
Features
Standard Features
Measurements
GR-26J
• 31 ft 9 in (9.70 m) working height
• 8 ft 3 in (2.51 m) horizontal reach
• 21 ft 10.5 in up-and-over reach
• Up to 500 lbs (227 kg) lift capacity
• 4 ft 10 in (1.45 m) jib boom with 140°
working range
Productivity
• Standard steel platform 0.90 m x 0.75 m
(2 ft 11 in x 2 ft 5.5 in) with sliding midrail
• Hydraulic turntable rotation
• Fully proportional lift and drive system
• Drivable at full height
• Low 6 in (15 cm) platform entry height
• Maintenance free rigid steel hydraulic mast
• 44.8 in (1.14 m) compact width
• Low unit height of 6 ft 6 in (1.99 m)
• Low machine weight of 6,250 lbs (2,835 kg)
• Onboard diagnostic system
• AC power to platform
• Direct electric rear wheel drive with electric
parking brake
• Front wheel steering
• Brake release switch
• Reinforced ABS chassis covers
• Tie down attachments points
• Overhead crane attachment points
• Non-marking solid tires
• Drive enable system
• Horn
• Hour meter
• Tilt level sensor with audible alarm
• Platform overload sensing
• Manual platform lowering valve
• Emergency stop at both platform and
ground controls
Power
• Automatic 30 Amp 24 V battery
onboard charger
• 24 V DC (twelve 2V, 280 Ah
traction batteries)
• Battery charge indicator
Options & Accessories
Productivity
• Flashing beacon
• Biodegradable hydraulic oil
• Platform work lights
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
GRJ 0210L. Part No. 127300
Distributed By:
www.genielift.com
Loading...