Page 1
RF200AHD
User Manual
Page 2
RF200AHD(
2
Index………………………………………………………….........................2
Main Features………………………………………………………………...3
General Description…………………………………………………………..4
Hardware Layout…………………………………………………………..…5
Specifications………………………………………………………………...6
Page 3
RF200AHD(
3
Main Features
• 5.8GHz
• IP65 Rated
• 7 RF Channels
• 150 meter range (Line of site)
• Plug and Play Installation
• 9V – 24V AC / DC Operation
• 4 Channel signal strength meter (RSSI)
• Low cost and easy to install solution compared to IP systems.
• Supports AHD-M (720P 1.3Mp), AHD-L(960H), CVBS (PAL & NTSC)
Page 4
RF200AHD(
4
General Description
The RF200-AHD is a 720P HD high quality wireless video link offering a superior
picture quality compared to existing analogue video. The RF200-AHD supports the
following AHD formats AHD-M (720P 1.3Mp), AHD-L (960H) and is also backward
compatible with CVBS analogue video.
Designed for the CCTV industry the RF200-AHD is an easy to install, self-contained
unit which operates from 9 to 24V AC/DC, has a built in RSSI signal strength meter,
IP65 rated enclosure and easy to connect rising clamp connectors for both the video
and power connections.
A range of 150 meters (Line of Site) is achievable with the RF200-AHD and the link
signal level is monitored with the built in RSSI signal strength meter. The RF200AHD is supplied with 2 high quality wall mount brackets for easy x & y alignment, an
optional pole mount bracket is also available.
Guidance Notes
• These units need line of sight for correct operation.
• When installing please be aware that any other 5.8Ghz devices mounted in
close proximity may interfere and cause lines on the received image.
• Try not to install in locations where large or moving objects may pass through
the fresnal zone.
• Trees or foliage may interfere especially during summer months when leaves
containing water are present.
Page 5
RF200AHD(
5
Hardware Layout
Tx & Rx Antenna: 6dBi directional patch antenna’s
RSSI: 4 Level Signal Strength Meter.
Video In: Video in connection from camera
Video Out: Video out connection to DVR
Power: 9 – 24V AC / DC power supply
Channel Selection: Sets the RF channel. Channel settings are as follows:
Channel DIP1 DIP2 DIP3
1 On On On
2 Off On On
3 On Off On
4 Off Off On
5 On On Off
6 Off On Off
7 On Off Off
Receiver
Video Output
TX Antenna
RSSI
Signal Strength
Channel Selection
Power
0V
Video Input
Transmitter
RX Antenna
Power
Channel Selection
Page 6
RF200AHD(
6
Specifications
Electrical
Operating Voltage
9V – 24V AC / DC
Tx Operating Current
110mA Max @ 12V
Rx Operating Current
200mA Max @ 12V
Temperature
-10 ~ +55 Degrees
Humidity
90% Non-Condensing
Radio
Channel 1
5.740 GHz
Channel 2
5.760 GHz
Channel 3
5.780 GHz
Channel 4
5.800 GHz
Channel 5
5.820 GHz
Channel 6
5.840 GHz
Channel 7
Transmit Power
Rx Sensitivity
Modulation
Transmission Range
5.860 GHz
<= 14dBm
-85 ~ -10dBm
FM - FM
150 Meters (LOS)
Approvals
EN300-440
EN301-489
Mechanical
Case Rating
IP65
Case Size (With Grommet)
115 x 65 x 40mm
Page 7
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543
www.geniecctv.com
Edition. Feb 2017
Loading...