Genie QuickStock Product Specifications
Aerial Work Platforms
Genie® QuickStock
Specifi cations
Models QS-12 QS-15 QS-20
Measurements US Metric US Metric US Metric
Working height* 17 ft 4 in 5.28 m 20 ft 10 in 6.35 m 25 ft 9 in 7.85 m
Platform height 11 ft 4 in 3.45 m 14 ft 10 in 4.52 m 19 ft 9 in 6.02 m
Platform dimensions (length x width)
B
A
With tray down 35 x 28.75 in .89 x .73 m 35 x 28.75 in .89 x .73 m 35 x 28.75 in .89 x .73 m
With tray up 56 x 28.75 in 1.4 x .73 m 56 x 28.75 in 1.4 x .73 m 56 x 28.75 in 1.4 x .73 m
Height - stowed 5 ft 2 in 1.57 m 5 ft 2 in 1.57 m 6 ft 6 in 1.98 m
C
Length - stowed 4 ft 5 in 1.35 m 4 ft 5 in 1.35 m 4 ft 5 in 1.35 m
D
Width 2 ft 5.5 in .75 m 2 ft 5.5 in .75 m 2 ft 7.5 in .80 m
E
Ground clearance - center 2.5 in .06 m 2.5 in .06 m 2.5 in .06 m
F
Productivity
Lift capacity 500 lbs 227 kg 500 lbs 227 kg 350 lbs 159 kg
Drive speed - stowed 2.5 mph 4.0 km/h 2.5 mph 4.0 km/h 2.5 mph 4.0 km/h
Drive speed - raised 0.5 mph 0.8 km/h 0.5 mph 0.8 km/h 0.5 mph 0.8 km/h
Gradeability** 30% 30% 30%
Turning radius - inside zero zero zero
Turning radius - outside 4 ft 7 in 1.42 m 4 ft 7 in 1.42 m 4 ft 7 in 1.42 m
Raise / lower speed 20 / 18 sec 20 / 18 sec 21 / 19 sec 21 / 19 sec 24 / 21 sec 24 / 21 sec
Controls 24V DC proportional 24V DC proportional 24V DC proportional
Tires - solid non-marking 10 x 3 x 8 in 25 x 8 x 20 cm 10 x 3 x 8 in 25 x 8 x 20 cm 10 x 3 x 8 in 25 x 8 x 20 cm
™
Power
Power source 24V (four 6V 200 Ah maintenance-free batteries)
Hydraulic system capacity 2.2 gal 8.33 L
Weight***
Retail (R) configuration 1,609 lbs 730 kg 2,220 lbs 1,007 kg 2,479 lbs 1,124 kg
Warehouse (W) configuration 1,581 lbs 717 kg 2,192 lbs 994 kg 2,451 lbs 1,112 kg
Standards Compliance ANSI A92.6, CSA B354.2, EN 280
A
B
C
D
E
F
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope rating.
*** Weight will vary depending on options and/or country standards.
www.genielift.com
Aerial Work Platforms
Genie® QuickStock
Features
Measurements
QS-12R & QS-12W
• 17 ft 4 in (5.28 m) working height
• 11 ft 4 in (3.45 m) platform height
• Up to 500 lbs (227 kg) lift capacity
QS-15R & QS-15W
• 20 ft 10 in (6.35 m) working height
• 14 ft 10 in (4.52 m) platform height
• Up to 500 lbs (227 kg) lift capacity
™
QS
-20R & QS™-20W
• 25 ft 9 in (7.85 m) working height
• 19 ft 9 in (6.02 m) platform height
• Up to 350 lbs (159 kg) lift capacity
Power
• Automatic 25 amp battery charger
• AGM maintenance-free batteries
• 6 ft (1.8 m) charger cord
• 24V (four 6V 200 Ah maintenance-free
batteries)
Productivity (Retail confi guration only)
• Dual flashing beacons
• Obstruction sensing pad
™
Productivity
• Stockpicker platform with dual side entry
gates and front folding tray
• Stockpicker rear parcel tray
(QS-12 & QS-15, ANSI only)
• Auxiliary platform lowering
• Low 15.5 in (0.39 m) platform entry height
• Patented rigid mast system
• Enclosed platform cables
• Compact base 29.5 x 53 in
(0.75 x 1.35 m) (QS-12 & QS-15 only)
• SmartLink
• Battery charge indicator
• On-board diagnostic system
• AC power to platform
• Descent and tilt alarm
• Zero inside turning radius
• Dual wheel brakes
• Hydraulic brake release
• Pothole protection
• Hinged rear ABS covers for easy access
to all major electrical and hydraulic
components
• Tie down attachment points
• Overhead crane attachment point
• Large forklift pockets access
• Flashing beacons (Retail
configuration only)
• Obstruction sensing pad (Retail
configuration only)
• Non-marking solid tires
™
control system
Options & Accessories Standard Features
Productivity
• Dual bike hooks
• Motion alarm
• Adjustable front tray
• EE Certification
• Biodegradable hydraulic oil
• Drive cutout while charging
• 10 ft retractable charging cord
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
QS 0210B. Part No. 127274
Distributed By:
www.genielift.com
Loading...