Genie MSC Series User Manual

Genie CCTV Limited 1 MSC6HULHV Version 2.1

Solid Stainless Steel

Vandal Resistant & Weatherproof

Digital Day/Night Bullet Camera

Before installing and using the camera please read this User Manual carefully, and retain it

in a safe place for future reference.

Model: MSC Series

User Manual

Genie CCTV Limited 2 MSC6HULHV Version 2.1

This lightning flash with an arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence
of un-insulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

FCC WARNING

: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate
this equipment if any unauthorised changes or modifications are made.

REGULATORY INFORMATION:

FCC Part 15 This equipment has been tested and
found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at their own
expense.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT DISMANTLE
THE CAMERA. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL.

Genie CCTV Limited 3 MSC6HULHV Version 2.1

Warnings

This camera requires periodic inspection

Contact an authorised technician to carry out the inspection.

Stop using the camera if it’s found to be malfunctioning

If the camera emits smoke, or is unusually hot for an extended period of time, a fire may
be caused.

Do not Install the camera on a surface that cannot support it

If the camera is installed on an inappropriate surface, it may fall and cause injury.

Do not hold the electrical plug with wet hands.

It could cause an electric shock.

Do not disassemble the camera.

It may result in an electric shock or other hazards.

Note

If the camera is exposed to spotlight or other

objects reflecting strong light, smearing or
blooming may occur.

Please check that the power satisfies the normal

specification before connecting the camera.