Genie IWP Super Product Specifications
Aerial Work Platforms
IWP™ Super Series
Specifi cations
Models IWP-20S IWP-25S IWP-30S
A
B
D
C
Measurements US Metric US Metric US Metric
Working height* 26 ft 2 in 8.15 m 30 ft 5 in 9.44 m 35 ft 6 in 11 m
Platform height 20 ft 2 in 6.15 m 24 ft 5 in 7.44 m 29 ft 6 in 9 m
Horizontal outreach** 2 ft 2 in 0.66 m ——— ——— ——— ———
A
Height - stowed:
B
fully lowered 6 ft 4 in 1.93 m 6 ft 4 in 1.93 m 6 ft 4 in 1.93 m
base raised 6 ft 6 in 1.98 m 6 ft 6 in 1.98 m 6 ft 6 in 1.98 m
Length 5 ft 1.52 m 5 ft 1.52 m 5 ft 1.52 m
C
D
Width - standard base 2 ft 8 in 0.81 m 2 ft 8 in 0.81 m ——— ———
wide base ——— ——— ——— ——— 3 ft 4 in 1.02 m
Corner access*** 6 in 0.15 m 6 in 0.15 m 7 in 0.18 m
Productivity
Lift capacity: ANSI/CE/CSA 350 lbs 159 kg 350 lbs 159 kg 350 lbs 159 kg
ANSI/CE with outreach option 300 lbs 136 kg ——— ——— ——— ———
Platform Dimensions (l/w/h)
Standard 27/26/44.75 in 69/66/114 cm 27/26/44.75 in 69/66/114 cm 27/26/44.75 in 69/66/114 cm
Gated standard 27/26/44.75 in 69/66/114 cm 27/26/44.75 in 69/66/114 cm 27/26/44.75 in 69/66/114 cm
Gated narrow 26/20/44.75 in 66/51/114 cm 26/20/44.75 in 66/51/114 cm 26/20/44.75 in 66/51/114 cm
Standard fiberglass** 29/26.5/43.5 in 74/67/110 cm 29/26.5/43.5 in 74/67/110 cm 29/26.5/43.5 in 74/67/110 cm
™
Power
AC models 110 V / 50-60 Hz or 220 V / 50-60 Hz
DC models 12V
Weight****
Standard base
ANSI (AC)/CSA 1,245 lbs 565 kg 1,290 lbs 585 kg ——— ———
ANSI (DC)/CSA 1,345 lbs 610 kg 1,390 lbs 630 kg ——— ———
CE (AC) 1,245 lbs 565 kg 1,290 lbs 585 kg ——— ———
CE (DC) 1,345 lbs 610 kg 1,390 lbs 630 kg ——— ———
Standard base with outreach option
ANSI (AC) 1,350 lbs 612 kg ——— ——— ——— ———
ANSI (DC) 1,450 lbs 658 kg ——— ——— ——— ———
CE (AC) 1,350 lbs 612 kg ——— ——— ——— ———
CE (DC) 1,450 lbs 658 kg ——— ——— ——— ———
Wide base
ANSI (AC)/CSA ——— ——— ——— ——— 1,430 lbs 649 kg
ANSI (DC)/CSA ——— ——— ——— ——— 1,530 lbs 694 kg
CE (AC) ——— ——— ——— ——— 1,430 lbs 649 kg
CE (DC) ——— ——— ——— ——— 1,530 lbs 694 kg
Standards Compliance ANSI A92.3, CSA B354.1, EN 280, AS 1418.10
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Fiberglass platforms are not available with the outreach option.
*** Corner of platform top rail to corner of wall with ability to rotate leveling jack handle.
**** Weight will vary depending on options and/or country standards.
www.genielift.com
Aerial Work Platforms
IWP™ Super Series
Features
Standard Features
Measurements
IWP-20S
• 26 ft 2 in (8.15 m) working height
• 20 ft 2 in (6.15 m) platform height
• 2 ft 8 in (0.81 m) standard base width
• Outreach option adds 2 ft 2 in (0.66 m)
of horizontal reach
• Up to 350 lbs (159 kg) lift capacity
IWP-25S
• 30 ft 5 in (9.44 m) working height
• 24 ft 5 in (7.44 m) platform height
• 2 ft 8 in (.81 m) standard base width
• Up to 350 lbs (159 kg) lift capacity
IWP-30S
• 35 ft 6 in (11 m) working height
• 29 ft 6 in (9 m) platform height
• 3 ft 4 in (1.02 m) wide base width
• Up to 350 lbs (159 kg) lift capacity
Productivity
• Standard base (IWP™-20S and 25S only)
• Sliding mid-rail standard platform
• Auxiliary platform lowering
• Most rigid mast in the industry
• Standard base rolls through standard
doorways
• Wide base rolls through double doorways
• AC power to platform
• Dual activated up/down switch
• Ground fault interrupter lower receptacle
• Tie down attachment points
• Overhead crane attachment point
• Wide forklift pockets
• Built-in level sensing with interlocks
™
Options & Accessories
Productivity
• Outreach option (IWP-20S only)
• Operational warning light and
descent alarm package (mandatory
for CE and AUS)
• Tool tray
• Fluorescent tube caddy
• Platform locating laser light
Power
• Power wheel assist with dual
battery package*
• Dual battery package
• DC power 85V, 110V or 220V / 50-60
Hz
Platform
• Gated standard platform
• Gated narrow platform
• Standard fiberglass platform
Base
• Wide base (IWP™-30 only)
* Adds 12.5 in (.32 m) to unit length and
285 lbs (129 kg) to unit weight
Shown with optional power wheel assist
Power
• AC power 110V / 50-60 Hz
• AC power 220V / 50-60 Hz
• DC power with worldwide automatic
“smart” charging system (12V / 110V /
230V / 50-60 Hz)
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
IWP20S 0210K. Part No. 109333
Distributed By:
www.genielift.com
Loading...