Genie GTH-1544 Product Specifications

Telehandler

GTH™-1544

Speciﬁ cations

Model GTH™-1544

Measurements US Metric

Maximum lift height 44 ft 13.41 m Maximum forward reach 27 ft 3 in 8.31 m Reach at maximum height 10 in 0.25 m Height, stowed 8 ft 7 in 2.61 m

Length, stowed (without forks) 20 ft 4 in 6.20 m

Width 7 ft 11 in 2.42 m Wheelbase 11 ft 6 in 3.50 m

Ground clearance, center 1 ft 3 in 0.38 m

Ground clearance, axle 1 ft 3 in 0.38 m

Fork cross section 2.4 x 5.9 in 60 x 150 mm

Productivity

Maximum lift capacity 15,000 lbs 6,804 kg Lift capacity at maximum height 10,000 lbs 4,536 kg Lift capacity at maximum reach 3,500 lbs 1,587 kg Drive speed 18 mph 29 km/h Raise/Lower boom 19/15 seconds 19/15 seconds Extend/Retract 16/14 seconds 16/14 seconds Draw bar pull 22,500 lbs 10,206 kg Turning radius, outside (4WS) 14 ft 7 in 4.45 m Auxiliary hydraulic flow 2-15 gpm 7.57-56.8 lpm Auxiliary hydraulic pressure 3,335 psi 230 bar Tires, standard size 17.5 x 25 in. air filled 20PR

Load Chart GTH™-1544**

50 ft

15.24 m

75°

70°

40 ft

12.19 m

30 ft

9.14 m

20 ft

6.1 m

10 ft

3.05 m

0 ft

0 m

-10 ft

3.05 m

30 ft 20 ft 10 ft 0 ft -10 ft -20 ft

9.14 m 6.1 m 3.05 m -3.05 m 6.1 m

30°

20°

10°

0°

-5.5°

40°

3,500 lbs / 1,588 kg

60°

50°

7,000 lbs / 3,175 kg

5,000 lbs / 2,268 kg

10,000 lbs / 4,536 kg

15,000 lbs / 6,804 kg

0 m

Power

Power source Deutz 4.1TCD turbo charged diesel, Tier 4i 154 hp (115 kW)

Perkins 1204E-E44TA turbo charged diesel,

Tier 4i 147 hp (110 kW) Electrical system System voltage 12 volt Alternator Perkins 1204E-E44TA - 120amps Deutz 4.1TCD - 150amps Battery 1000 CCA at 0˚F (-18˚C) Hydraulic tank capacity 48 gal 182 L Hydraulic system capacity (w/tank) 77 gal 290 L Fuel tank capacity 47 gal 180 L

Weight*

33,686 lbs 15,280 kg

Standards Compliance ANSI/ITSDF B56.6, CSA B335

* Weight will vary depending on options and/or country standards. ** Load ratings vary depending on attachment.

www.genielift.com

Telehandler

GTH™-1544

Features

Measurements

• 15,000 lbs (6,804 kg) maximum lift capacity

• 44 ft (13.41 m) maximum lift height

• 27 ft 3 in (8.31 m) maximum reach

Productivity

• Full time 4WD

• 4WS

• Operator selectable front, crab, coordinated steering modes

• 2-speed forward and reverse “Shift-on-fly” hydrostatic transmission

• Transmission inch valve, brake pedal actuated

• Proportional frame leveling 7° each side

• Power assisted steering

• Inboard wet disc service brakes

• Wet disc spring applied parking brake

• 17.5 x 25 in. air-filled rough terrain tires

• Front axle differential lock

• High efficiency/variable displacement hydraulic pump

• Auxiliary hydraulic circuit (15 GPM)

• ROPS/FOPS canopy (ISO compliant)

• Single, multi-function, proportional joystick

• Machine level indicator

• Full gauge cluster with engine diagnostics

• Right-side screen standard on open cab

• Adjustable suspension seat

• Genie manual Quick-Attach

• Retractable 3 in (8 cm) seatbelt

• 48 in carriage and pallet forks

• Boom angle indicator

• 10 micron hydraulic return filter

• 1,000 cold cranking amps at 0° F (-18° C)

• Reverse motion alarm

• Mirror-LH canopy mounted

• Mirror-RH chassis mounted

• Fenders (set of 4)

™

system

Options & Accessories Standard Features

Productivity

• Fully enclosed cab (includes full glass, defroster, wipers, heater, split door, washer)

• Fully enclosed cab air conditioning

• Flashing beacon

• Work lights (2 cab front mounted, 2 tail)

• Road lights (2 cab front mounts, 1 back-up, 2 rear stop/turn/tail)

• Fire extinguisher

• Windshield protection grid

• Hydraulic Quick-Attach

• Rear back-up camera

™

Engine Options

• Deutz 4.1TCD turbo charged diesel, Tier 4 154 hp (115 kW)

• Perkins 1204E-E44TA turbo charged diesel, Tier 4 147 hp (110 kW)

• Cold weather package (includes engine block heater, oil pan heater and battery heater)

Tire Options

• 17.5 x 25 in 20-ply foam-filled rough terrain tires

• 17.5 x 25 in 20-ply air-filled rough terrain tires

Options & Accessories

Attachment Options

• Carriages – Quick-Attach

- 60 in (1.52 m) carriage

- 72 in (1.83 m) carriage

- 60 in (1.52 m) rotating carriage (10° from center left and right)

- 72 in (1.83 m) rotating carriage (10° from center left and right)

• Forks

- 60 in (1.52 m) pallet forks (set of two)

2.4 x 5.9 x 60 in (.06 x .15 x 1.52 m)

- 72 in (1.83 m) pallet forks (set of two)

2.4 x 5.9 x 72 in (.06 x .15 x 1.83 m)

• 7 ft truss boom, 4,400 lbs maximum lift capacity

™

Genie United States

18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730

Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475

Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.

GTH1544 0210K. Part No. 127299

Distributed By:

www.genielift.com