Page 1
AVERTISSEMENT
PRE-PROGRAMMED
REMOTE
INCLUDED
FOR QUICK
& EASY
Serial Number Decal
INSTALL
BELT/CHAIN/SCREW DRIVE
GARAGE DOOR OPENER MODELS:
2562, 2568, 3022, 3024, 3042, 3062 , 3064, 4024, 4042, 4062,
4064, 5042, SC1200, CB1000, CB1200
PROGRAMMING,
OPERATION &
MAINTENANCE
MANUAL
Includes
residential One-Piece or Sectional Overhead Garage Doors.
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
To reduce the risk of injury to persons or damage to property, use this opener only with a one-piece or sectional residential door.
Por réduire le risque de blessures ou de dommages materials, utilisez cet ouvre-porte uniquement pour une porte à section ré sidentielle.
INTELLICODE® Remote Control.
STOP
or call Customer Service at: 1-800-35-GENIE
Safe-T-Beam® system
Homelink® and Car2U® compatible
must be installed to close the door.
For use only with
Need help or have questions?
For answers and assistance,
visit www.GenieCompany.com
WARNING
©2015 The Genie® Company, the Genie Logo, Intellicode® and Safe-T-Beam®, are trademarks of GMI Holdings, Inc. d/b/a The Genie® Company.
All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvements, we reserve the right to change product specications without
prior notice or obligations. HomeLink is a registered trademark of Gentex Corporation. Car2U is a registered trademark of Lear Corporation.
38209502755
38267502755
Page 2
Safety Information
Safety Notications ................................................1
Important Safety Instructions ............................ 1
Important Installation Instructions .................. 2
Features
Safety Features ........................................................ 3
Opener Features ..................................................... 3
Safe-T-Beam Protection Function ..................... 3
Wall Console Features ........................................... 4
Programming Information
Introduction ............................................................. 5
Overview of Powerhead Controls.....................5
Travel Limits .................................................................
Closing Garage Door (DOWN Limit) ........6
Opening Garage Door (UP Limit) .............. 7
Force Control .................................................... 8
Contact Reverse Test ......................................8
Contact Reverse Adjustment ...................... 8
Remote Control Programming .......................... 9
If you are a homeowner/end user and
need help or have questions:
call 800-35-GENIE.
Or visit: www.GenieCompany.com
Do not return product to the store.
Alternate language manuals available at: www.GenieCompany.com
Idioma alternativo manuales disponibles en: www.GenieCompany.com
Autre langue manuels disponibles à: www.GenieCompany.com
Optional Programming
Programming Keypad ..................................10-11
Programming Vehicle Remotes .......................12
Clearing Memory for Remotes ........................13
Maintenance and Adjustments
Important Safety Instructions ..........................14
Regular Maintenance ..........................................15
Remote Battery Replacement ..........................15
Light Bulb Replacement ....................................16
Adjustment Guides ....................................... 16-17
Locating Safe-T-Beam® Pairs ............................18
Wiring Diagram ...................................................18
Troubleshooting .......................................... 19-20
One Piece Door Installation ..........................21
Warranty .................................................................22
Page 3
Safety Information
!
!
!
!
!
!
OVERVIEW OF POTENTIAL HAZARDS
READ THIS SAFETY INFORMATION
Garage doors are large, heavy objects that move with the help of springs under high tension and electric motors. Since moving objects, springs under tension, and electric
motors can cause injuries, your safety and the safety of others depend on you reading the information in this manual. If you have questions or do not understand the
information presented, call your nearest trained door system technician or visit our website at www.GenieCompany.com.
CONVENTIONS USED IN THESE INSTRUCTIONS
The following safety alert symbol and signal words are used throughout this manual to call attention to and identify dierent levels of hazards and special instructions.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and the
word
“DANGER”, “WARNING”, or
•
DANGER
•
WARNING
•
CAUTION
•
The word
Tous les messages concernant la sécurité seront indiqués après un symbole d’alerte de la sécurité et l’une des mentions suivantes “DANGER”, ”AVERTISSEMENT” ou
“MISE EN GARDE”.
• DANGER signale une situation dangereuse imminente qui, si elle n’est pas évitée, risque d’entraîner des blessures graves, voire mortelles.
• AVERTISSEMENT signale une situation potentiellement dangereuse qui, si elle n’est pas évitée, risque d’entraîner la mort ou des blessures graves.
• MISE EN GARDE signale une situation potentiellement dangereuse qui, si elle n’est pas évitée, risque d’entraîner des blessures ou des dommages matériels.
• Le terme REMARQUE est utilisé pour signaler les étapes importantes à suivre ou d’importants éléments à prendre en considération.
IMPORTANT SAFETY INSTRUCTIONS
“CAUTION”.
indicates an imminently hazardous situation which, if NOT avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if NOT avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if NOT avoided, may result in injury or property damage.
NOTEis used to indicate important steps to be followed or important considerations.
POTENTIAL HAZARD EFFECT PREVENTION
MOVING DOOR
ELECTRICAL SHOCK
HIGH SPRING TENSION
WARNING
Could result in Serious
Injury of Death
WARNING
Could cause Serious
Injury or Death
WARNING
Could cause Serious
Injury or Death
IMPORTANTES CONSIGNES DE SÉCURITÉ
DANGER POTENTIEL EFFET PRÉVENTION
PORTE EN MOUVEMENT
CHOC ÉLECTRIQUE
TENSION ÉLEVÉE RESSORT
AVERTISSEMENT
Pourrait entraîner des
blessures graves voire la mort
AVERTISSEMENT
Pourrait entraîner des
blessures graves voire la mort
AVERTISSEMENT
Pourrait entraîner des
blessures graves voire la mort
Do Not operate unless the doorway is in sight and free of
obstructions. Keep people clear of opening while door is moving.
Do Not allow children to play with the door operator.
Do Not change operator control to momentary contact unless and
external reversing means is installed.
Do Not operate a door that jambs or one that has a broken spring.
Turn o electrical power before removing operator cover.
When replacing the cover, make sure wires are not pinched or near
moving parts.
Operator must be electrically grounded.
Do Not try to remove, repair or adjust springs or anything to which
door spring parts are fastened such as wood block, steel brackets,
cables or any other structure or like item.
Repairs and adjustments must be made by a trained service
representative using proper tools and instructions.
Utiliser uniquement si la porte est en vue et libre de tout obstacle.
Ne laisser personne se tenir dans l’ouverture de la porte pendant
qu’elle est en mouvement.
Ne pas permettre aux enfants de jouer avec l’opérateur de la porte.
Ne pas modier la commande de l’opérateur à contact momentané
à moins qu’un moyen d’inversion externe soit installé.
Ne pas faire fonctionner une porte qui bloque ou dont le ressort
est cassé.
Couper le courant avant d’enlever le couvercle de l’opérateur.
Lorsque le couvercle doit être remplacé, s’assurer que les ls ne sont
ni coincés ni près des pièces mobiles.
L’opérateur doit être correctement mis à la terre.
Ne pas essayer d’enlever, réparer ni ajuster les ressorts ou
toute autre pièce à laquelle le ressort de la porte est attaché, y
compris blocs de bois, supports en acier, câbles ou autres articles
semblables.
Les réparations et les réglages doivent être eectués par
technicien qualié qui se sert d’outils appropriés et qui respecte les
instructions.
1
Page 4
Download completed ebook here
Loading...