IMPORTANT
PLEASE READ BEFORE STARTING ASSEMBLY
Your new Genesis heater is fitted with a safety tip over
switch that switches the heater off if it is knocked over. To
ensure the correct operation of the tip switch, the mounting
plate fitted to the top of the pole must be located between
the indents fitted on the heater bracket, ensuring the angle
of the heater head cannot be adjusted. See illustrations
below.
Always make sure the heater is used on a flat stable surface.
Failure to follow these instructions will mean
the heater will not operate when power is
applied.
GENESIS
INFRARED HEATER
(
62325
)
INSTRUCTION MANUAL
G
U
A
R
A
N
T
E
E
USU4BIPFS-G15
USU4BIPFSBL-G15
USU4BIPFSBZ-G15
Loading...