~ДлздмнЙ=СбЗЙдбн
ó
Owners Manual and Set-up Guide:
Genesis Standard Surround Loudspeaker
Contents
1 SET-UP GUIDE 3
1.1 UNPACKING 3
1.2 PLACEMENT 3
1.3 CONNECTIONS 4
2 THE TECHNOLOGIES USED 5
2.1 THE TRANSDUCERS 5
2.1.1 THE GENESIS RIBBON TWEETER 5
2.1.2 TITANIUM MIDRANGE 5
2.1.3 ALUMINUM-CONE WOOFERS 5
2.2 CROSSOVER 5
2.3 VIBRATION-FREE CABINET 6
3 SPECIFICATIONS 7
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
1
~ДлздмнЙ=СбЗЙдбн
ó
A Message from Genesis
Congratulations! You are now the owner of one of the finest
loudspeakers in the world. Based on technologies developed for
our flagship Genesis 1.1, the Genesis Standard Surround
Loudspeaker is designed for those of us who live in beautiful
homes and want an elegant loudspeaker that will deliver the best
sound in its class.
The Genesis Standard Surround 1 (or SR1) is used as surround or
rear speakers in a home theater set-up, or in an audiophile multichannel music system. It is voiced to be mounted high above the
ear-level on the wall, recessed into a wall, or in the corners of a
room. In a small room, or where space is tight, four can be used in
the four corners of a room to deliver an excellent surround system
with the addition of the Genesis Standard Center Loudspeaker.
As part of the Genesis family of loudspeakers, it has an identical
tweeter, midrange, and mid-bass coupler drivers, and a similar
voice to the rest of the family. Being a Genesis absolute fidelity™
product, it is a perfect complement to any other Genesis model.
Sound structural engineering principles have been applied to make
the SR1 cabinet rigid and well-damped. All construction and even
internal braces are made of 15mm MDF to ensure that the cabinet
is the best environment on which to mount the transducers. This
results in extremely low cabinet coloration, and excellent soundstaging and imaging. (Yes, the sound-stage is important even for
rear speakers!)
Please read this Owners Manual and Set-up Guide to get the
maximum enjoyment out of your purchase. Also, check out our
website at www.genesisloudspeakers.com
tips & tricks and support for our owners.
for the latest updates,
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
2
~ДлздмнЙ=СбЗЙдбн
ó
1 Set-up Guide
Now that you have your new Genesis Standard Surround 1
loudspeaker, we realize that you can’t wait to hook it up and start
playing! However, please read this quick set-up guide (even if your
dealer is setting it up for you) before you proceed.
1.1 Unpacking
Your loudspeakers will come to you in a large shipping carton weighing
over 43lbs (20kgs). Use correct lifting techniques when moving the
speaker carton around or lifting the speaker out of its carton. We will not
be held liable for damage to either the speakers or your backs during
unpacking and setting up.
1.2 Placement
The speakers should be hung high on the side-wall, in corners, or even
mounted in the wall with the “nose” protruding. You will need a qualified
installer to mount them on strong brackets. The speaker weighs 38.5
pounds (17.5kgs) each, and can cause death or severe injury if it falls on
someone! As the typical surround loudspeaker, they are voiced to be
used firing over the heads of the audience.
A good starting position is for the SR1 to be placed horizontally about
72 inches from the floor and approximately 10 degrees behind the
listener, and at the same distance from the listener as the main
Left/Center/Right speakers.
The SR1 should be hung on extremely strong brackets on the wall, or
installed onto the wall by a competent installer. They can also be
installed in the rear corners of the room, where they can do double duty
as rear and side surround loudspeakers.
The SR1 are designed to be augmented by a subwoofer, and for this
purpose they have two pairs of binding posts. The pair labelled “THRU”
is wired in parallel with the inputs#, and are used to ‘jump’ to a Genesis
ServoSub™. If a ServoSub is hooked up in this way, set the speaker to
“LARGE” on the home theatre processor. If a subwoofer is not used, set
the speaker to “SMALL”.
#
These are NOT to be used for bi-wiring or bi-amping.
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
3
~ДлздмнЙ=СбЗЙдбн
ó
If you have any questions, feel free to contact us at Genesis. Our
website is the first place you can look to for more information, but you
are welcome to either send us an email, or just give us a call!
1.3 Connections
The speakers should be connected directly to the speaker-level output
of your power amplifiers using high quality speaker cables and the 5way binding posts.
The high-level thru-put binding posts on the speaker are for connecting it
to a subwoofer. We recommend the Genesis ServoSub™ 928 or the
ServoSub™ 2/12t as the perfect complement to this speaker. The
S2/12t is designed for corner or sidewall loading – making it the ideal
companion for a surround loudspeaker, and unobtrusively placed in a
rear corner of the room.
The ideal interconnect for this is the Genesis ServoSub-Loudspeaker
Interface Cable. This is because the loudspeaker to powered subwoofer
interconnection is a unique electrical interface that is not properly served
by either an ordinary interconnect cable or loudspeaker cable.
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
4
~ДлздмнЙ=СбЗЙдбн
ó
2 The Technologies used
2.1 The Transducers
The transducers in the 3-way Genesis Standard Surround are all
proprietary Genesis-designed drivers manufactured to our exacting
standards:
2.1.1 The Genesis Ribbon Tweeter
Reviewers in the audiophile press have often remarked that the Genesis
circular ribbon tweeter is the world’s best – and they still do, up to today.
It is a one inch circular planar ribbon design crafted from an extremely
thin membrane of Kapton® with a photo-etched aluminium “voice coil”
that is a mere 0.0005 inch thick. The entire radiating structure has less
mass than the air in front of it! That is why it will accurately reproduce
frequencies beyond 36 kHz.
The result of this design is a driver that has a rapid and uniform
response to high frequencies and has the speed of the best
ribbon/electrostatic designs, without the high distortion and poor
dispersion that is typically associated with them.
2.1.2 Titanium Midrange
We sometimes say that the midrange is a window into the mind of a
composer or a singer. And indeed, the midrange is where the “magic” is
in a well-recorded musical event.
The SR1 uses a Genesis-designed proprietary 5 inch titanium-coned
midrange to cover this critical frequency spectrum. Manufactured out of
one of the lightest and stiffest materials known, this low mass cone
driver is one of the best midrange transducers ever made, with nearly
instantaneous transient response, enabling the SR1 to sound lifelike and
effortless.
2.1.3 Aluminum-cone Woofers
The SR1 incorporates two 6.5 inch metal cone woofers. Made of a cone
of solid aluminium, the suspension and voice-coil have been maximized
for long, distortion-free excursion so as to increase dynamic range. Our
aluminium cones are a magnitude stiffer than plastic or paper cones,
and virtually eliminate the problems caused by cone bending and breakup.
2.2 Crossover
The crossover is the brain of the loudspeaker. In order to manage and
maximize the performance of the extensive complement of transducers
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
5
~ДлздмнЙ=СбЗЙдбн
ó
used in Genesis loudspeakers, we spend an inordinate proportion of
money on the crossover.
Each crossover is designed by computer modelling plus years of
knowledge and experience. The inductors are custom designed and
made for Genesis with OFC copper windings. Genesis Capacitors
(GenCaps), using high-quality polypropylene-film and tin-foil (not
aluminium) are also used throughout the crossover.
More importantly, the crossovers are designed with many, many hours
of music listening and constant refining, tuning and tweaking of the
circuit. Out of this comes the “magic” that is a Genesis-designed
loudspeaker system. For example, by going the more expensive route
of using several smaller capacitors in parallel instead of a single large
one, transparency and musicality were improved.
2.3 Vibration-free Cabinet
The cabinet was designed for aesthetics, but with an obsession to sonic
quality, vibration control, structural strength and rigidity. Extensive
bracing was carefully incorporated using 12mm slabs of MDF to
eliminate cabinet flex and panel resonance.
Incidentally, MDF was chosen as the material of choice for its damping
properties and its consistency in hardness, density and rigidity. It would
actually have been cheaper and easier to make the cabinet of solid
wood, but that would have been a compromise.
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
6
~ДлздмнЙ=СбЗЙдбн
ó
3 Specifications
Frequency Response: 75Hz to 36kHz, ± 3dB
Sensitivity: 88 dB, 1 watt 1 meter
Min/Max Power (Tube): 45/300 watts per side
Min/Max Power (Solid State): 50/500 watts per side
Input Impedance: 6 ohms (Nominal)
HF Transducers: One 1” Circular Ribbon Tweeter
Midrange Transducers: One Genesis 5” titanium cone
midrange
LF Transducers: Two Genesis 6.5” aluminium
cone
Inputs: High-level with 5-way binding posts
Throughputs: High-level with 5-way binding posts
Dimensions: H 14½ “ x W 20½” x D 12”
Weight: 38 lbs (17kg) per side
Finishes: Satin black
Genesis Standard Surround Loudspeaker Owners Manual Ver 1.0
7
Loading...