Generic HDCN0040M1 User Manual

User Manual

HDMI Audio Embedded & Extractor

Model NO:HDCN0040M1

Introduction

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.

Our series of converters, switchers, extenders, matrixes and splitters are designed to
make your A/V device use more convenient, more comfortable, more productive and
more cost-efficient.

The device can switch 1 HDMI Inputs to one HDMI Output. It also can support audio
extract mode and audio embed mode. Audio Embed mode can let the audio input by the
Toslink Port, Coax Port and LR Port and output by the HDMI Output port; Audio extract
mode supports 2.0CH,5.1CH and Pass Three audio EDID set; Audio embed mode can
choose the Toslink, Coax or LR Audio input by pressing the switch button.
Audio ports can be used as input/output, this design can save the cost/space to let the
device become simple at outlook and use.

The deice also supports 4K,ARC feature to make more easier connection between the
home entertainment device.

Our devices offer solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training
environments.

INTRODUCITON

Feature

：

One HDMI Inputs switch to one HDMI Output

Support 4K

By pressing the button at device can do switch between the Audio Extract Mode and

Audio Embed Mode

Coax Port and LR Port can be used as the Input/Output at Audio Extract and Audio

Embed mode to reduce the number of port to let device become more simple and

easy-use.

At Audio Extract Mode, Digital Port of Toslink and Coax can support 192Khz Sampling

Rate(LPCM2.0 Audio Format)

At Audio Extract Mode, it supports 2.0CH,5.1CH and Pass Three Audio EDID Set.

At Audio Embed Mode, Digital Audio Port of Toslink and Coax supports max 96KHz

Sampling Rate ( Only when input audio source is LPCM 2.0 Audio Format), also it

supports Dolby-AC3 and DTS Audio Format Input. The analog audio (LR Channel)

supports max 2V P-P analog audio input.

It supports ARC. The ARC audio can output by the digital port of Toslink and Coax and

the analog LR audio port(analog audio only can output when the ARC Audio source is

LPCM 2.0 Audio format).

Support Power Off Memory Function, it can remember the last working state. When

power on again, it can back to the last working state.

LED Status Light shows clearly the working state.

HDMI Input and Output distance can be up to 8m using the AWG26 standard HDMI

Cable.

No Loss of Signal

Easy-Install

DC5V1A Power Adaptor

Accessories Content:

1、5V/1A Power Adaptor
2、Manual
3、Remote

Physical Connect Port:

Picture 1.0 Front Panel Showing

A：Standby and Start Button
B：Standby Status LED, when light goes bright, the device goes to Standby State.
C：ARC On/Off Button
D：Audio Embed Mode On/Off Button
E：Audio Embed Channel Switch Button
F：EDID Mode Switch Button
G：ARC Status LED Light, when light goes bright, ARC function on.
H

：

Audio Embed On/Off Led Status Light, when LED light goes bright, Audio Embed

function on.

I

：

Remote IR Window Port
J: At Audio Embed Mode, LR Input Channel LED Status Light.
K：At Audio Embed Mode, Coax Input Channel LED Status Light.
L：At Audio Embed Mode, Toslink Input Channel LED Status Light.
M：EDID 2CH LED Status Light
N：EDID 5.1CH LED Status Light
O：EDID Pass Mode LED Status Light.