The design and specifications are subject to change without prior notice
for product improvement. Consult with the sales agency or manufacturer
for details.
AIR CONDITIONER
REMOTE CONTROLLER ILLUSTRATION
CR142-R51G(H)
202055091488
Thank you very much for purchasing our air conditioner.
Please read this owner's manual carefully before using
your air conditioner.
Remote Controller Specifications
CONTENTS
Remote controller Specifications...................................................
Operation of buttons .................. ..................................................
Indicators on LCD ..........................................................................
How to use the buttons .................................................................
Auto operation.................................................................................
Cooling/Heating/Fan operation......................................................
Dehumidifying operation ...............................................................
Timer operation...............................................................................
Handling the remote controller ......................................................
12
Model
Rated Voltage
2
Signal Receiving
RG51G/E, RG51H/E
3.0V(Dry batteries R03/LR03 2)
8m
Range
3
Environment
-5 C 60C
~~
5
6
6
6
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
O
FAN
HIGH
MED
LOW
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
O
FAN
HIGH
MED
LOW
7
MODE
SWING
TEMP
ON/OFF
ECO
RESET LOCK
DO NOT
DISTURB
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
8
MODE
SWING
TEMP
ON/OFF
SLEEP
RESET LOCK
DO NOT
DISTURB
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
RG51G/E
NOTE:
Buttons design is based on typical model and might be slightly different from the
RG51H/E
actual one you purchased the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
When there are wide differences between Remote controller Illustration and
, ,
USER'S MANUAL on function description, the description of USER'S
MANUAL shall prevail.
,,
,,
11
,,
,,
, ,
22
Operation of buttons
TEMP
O
FAN
HIGH
MED
LOW
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
2
ON/OFF
ECO
RESET LOCK
DO NOT
DISTURB
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
3
MODE
SWING
4
5
6
7
RG51G/E
11
12
13
10
TEMP UP Button
1
Push this button to increase the indoor temperature setting in 1 C increments to 30 C.
TEMP DOWN Button
2
Push this button to decrease the indoor temperature setting in 1 C increments to 17 C.
OO
OO
NOTE Temperature contol is not available
in Fan mode.
3
MODE Button
Press this button to modify the air conditioner
1
8
9
mode in a sequence of following:
AUTO
COOL
DRY
HEAT FAN
NOTE Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling
only appliance.
SWING Button
4
Used to stop or start horizontal louver movement or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
ECO Button(applicalbe for RG51G/E):
5
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
automatically to 24 C, fan speed of Auto to
save energy(but only if the set temperature
is less than 24 C). If the set temperature is
between 24 C and 30 C, press the ECO
O
O
OO
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
NOTE:
Pressing the TURBO and SLEEP button,
modifying the mode or adjusting the set
temperature to less than 24 C will stop
O
ECO operation.
Under ECO operation, the set temperature
should be 24 C or more. it may result in
O
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
Operation of buttons
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
O
TEMP
1
ON/OFF
3
MODE
SWING
4
5
6
SLEEP
RESET LOCK
DO NOT
DISTURB
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
7
RG51H/E
FAN
HIGH
MED
LOW
11
12
13
10
SLEEP Button(applicable for RG51H/E):
Active/Disable sleep function. It can
maintain the most comfortable temperature and save energy. This function is
available on COOL, HEAT or AUTO
mode only .
For the details, please see sleep
operation in USER S MANUAL.
,,
,,
,,
,
,,
NOTE: While the unit is running under
SLEEP mode, it would be cancelled if
MODE, FAN SPEED or ON/OFF button
is pressed.
2
8
9
6
RESET Button
Once the recessed RESET button is pressed,
all of the current settings will be cancelled and
the controller will return to the initial settings.
DO NOT DISTURB Button
7
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under DO NOT DISTURB mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
8
ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
9
FAN/SILENCEC Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
If pushing more than 2 seconds, the Silence
function will be activated, pushing more than
2 seconds again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and creat a quiet and comfortable
room for you. Due to low frequency operation
of compressor, it may result in insufficient
cooling and heating capacity.
33
44
TIMER ON Button
10
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the autotimed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
11
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto
-timed setting in 30 minutes increments.
When the setting time displays 10.0, each
press will increase the auto-timed setting
60 minutes increments. To cancel the autotimed program, simply adjust the auto-off
time to 0.0
LOCK Button
12
Press this recessed button to lock all current
TEMP
ON/OFF
ECO
RESET LOCK
DO NOT
DISTURB
O
FAN
HIGH
MED
LOW
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
1
8
9
10
11
12
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
2
3
MODE
SWING
4
5
6
7
13
settings, and the remote controller will not
accept any operation except that of the LOCK.
Use the LOCK mode when you want to
prevent settings from being changed
accidentally. Press the LOCK button again to
cancel the LOCK function. A lock symbol
Indicators on LCD
Information are displayed when
the remote controller is powered
up.
AUTO
SET TEMPERATURE
COOL
DRY
HEAT
TIMER ON OFF
FAN
HIGH
MED
LOW
Mode display
AUTO
COOL DRY
HEAT FAN
Displayed when data transmitted.
Displayed when remote controller is ON.
TIMER ON
TIMER OFF
SET TEMPERATURE
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
Indicated all the current settings are
locked
Fan speed indication
HIGH
MED
LOW
NO display
High speed
Medium speed
Low speed
Auto fan speed
will appear on the remote controller display
when the lock function is activated.
13
TURBO Button
Active/Disable Turbo function. Turbo
function enables the unit to reach the preset
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
temperature at cooling or heating operation
in the shortest time(if the indoor unit does
not support this function, there is no
corresponding operation happened when
pressing this button.)
55
66
How to use the buttons
TEMP
O
FAN
HIGH
MED
LOW
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
2
FAN /SILENCE
ON/OFF
MODE
1
SWING
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
ECO
RESET LOCK
DO NOT
DISTRUB
TEMP
TIMER ON
TIMER OFF
TURBO
O
FAN
HIGH
MED
LOW
2
FAN /SILENCE
ON/OFF
MODE
1
SWING
ECO
RESET LOCK
DO NOT
DISTRUB
TIMER ON
TIMER OFF
TURBO
How to use the buttons
Dehumidifying operation
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
OOO
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
increments.
2
3
3. Press the ON/OFFbutton to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
2
MODE
1
SWING
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
TEMP
ON/OFF
ECO
RESET LOCK
DO NOT
DISTRUB
O
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
FAN
HIGH
MED
LOW
2
3
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
can be set within a range of 17 C~ 30 C
O
in 1 C increments.
The temperature
OO
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
be set within a range of 17 C~ 30 C in 1 C
2
3
4
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
The temperature can
OOO
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
77
88
77
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
MODE
SWING
TEMP
ON/OFF
ECO
RESET LOCK
DO NOT
DISTRUB
O
FAN
HIGH
MED
LOW
FAN /SILENCE
TIMER ON
TIMER OFF
TURBO
Timer operation
!
Press the TIMER ON button can set the auto-on
time of the unit. Press the TIMER OFF button
can set the auto-off time of the unit.
To set the Auto-on time.
CAUTION
The effective operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
1
2
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
Example of timer setting
h
TIMER ON
Start
Off
Set
6 hours later
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you return
home. The air conditioner will automatically start
operating at the set time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting
of starting operation time and the signal "h "
will show on the display area.
2. Press the TIMER ON button to display "6.0h "
on the TIMER ON display of the remote
controller.
3. Wait for 3 seconds and the digital display
area will show the temperature again. The
"TIMER ON" indicator remains on and this
function is activated.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H " will disappear and the set temperature
will re-appear on the LCD display window.
99
1010
h
TIMER OFF
Stop
On
Set 10 hours later
h
TIMER ON OFF
2 hours later
after setting
Stop
10 hours later
after setting
On
Set
Start
TIMER OFF
(Auto-off Operation)
The TIMER OFF feature is useful when you want the
unit to turn off automatically after you go to bed. The
air conditioner will stop automatically at the set time.
Example:
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last setting of
stopping operation time and the signal "h " will
show on the display area.
2. Press the TIMER OFF button to display "10h " on
the TIMER OFF display of the remote controller.
3. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
OFF" indicator remains on and this function is
activated.
COMBINED TIMER
(Setting both ON and OFF timers simultaneously)
TIMER OFF TIMER ON
(On Stop Start operation)
This feature is useful when you want to stop the air
conditioner after you go to bed, and start it again in
the morning when you wake up or when you return
home.
Example:
To stop the air conditioner 2 hours after setting and
start it again 10 hours after setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display
2.0H on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display 10H
on the TIMER ON display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON OFF" indicator remains on and this function is
activated.
Set
Off
TIMER ON OFF
2 hours later
after setting
h
Start
Stop
5 hours later
after setting
TIMER ON TIMER OFF
(Off Start Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
Example:
To start the air conditioner 2 hours after setting,
and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display
2.0H on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display
5.0H on the TIMER OFF display .
5. Wait for 3 seconds and the digital display area
will show the temperature again. The "TIMER
ON OFF" indicator remains on and this function
is activated.
1111
1111
1212
1212
Handling the remote controller
Location of the remote controller.
Use the remote controller within a distance of 8
8m
S
E
T
T
A
E
U
MP
TO
E
C
R
O
A
O
T
L
U
D
R
R
E
Y
()
H
E
A
T
F
A
N
H
I
GH
M
E
D
T
E
LOW
M
P
M
O
D
E
O
N
D
A
IR
/
IR
O
F
E
C
F
TION
F
A
N
SP
S
L
E
E
E
ED
P
T
I
M
E
R
R
E
O
S
N
E
T
L
O
CK
T
I
M
E
R
O
L
E
F
D
F
D
IS
P
LA
Y
T
U
R
B
O
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
The air conditioner will not operate if curtains,
doors or other materials block the signals from
the remote controller to the indoor unit.
Prevent any liquid from falling into the remote
controller. Do not expose the remote controller
to direct sunlight or heat.
If the infrared signal receiver on the indoor unit
is exposed to direct sunlight, the air conditioner
may not function properly. Use curtains to
prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote
controller, either move these appliances or
consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller,
or step on it.
Using the remote controller holder(optional)
The remote controller can be attached to a wall or pillar
by using a remote controller holder(not supplied,
purchased separately).
Before installing the remote controller, check that the
air conditioner receives the signals properly.
Install the remote controller with two screws.
For installing or removing the remote controller, move
it up or down in the holder.
CAUTIONS
Replacing batteries
The following cases signify exhausted batteries.
Replace old batteries with new ones.
Receiving beep is not emitted when a signal
is transmitted.
Indicator fades away.
The remote controller is powed by two dry
batteries (R03/LR03X2) housed in the back rear
part and protected by a cover.
(1) Remove the cover in the rear part of the
remote controller.
(2) Remove the old batteries and insert the new
batteries,placing the(+) and (-) ends correctly.
(3) Install the cover back on.
NOTE: When the batteries are removed, the
remote controller erases all programming. After
inserting new batteries, the remote controller
must be reprogrammed.
CAUTIONS
Do not mix old and new batteries or batteries
of different types.
Do not leave the batteries in the remote
controller if they are not going to be used for
2 or 3 months.
Do not dispose batteries as unsorted
municipal waste. Collection of such waste
separately for special treatment is necessary.
1313
1212
1212
Loading...