Page 1
®
Super-Vee
The Small Drain Specialist
The Super-Vee offers you a complete
system for cleaning drain lines through
3" in diameter. With a variety of cables,
cutters and accessories available, you have
the right combination for any clogged drain problem.
The Super-Vee is built to clear clogged drains for a decade or more. And
our Dyna-Thrust™ bearing system is one reason why. It helps carry the
weight of the drum, significantly reducing wear on the motor shaft
bearing and extending the life of the tool. Of course the
cables are Flexicore® – with an integral wire rope
center. Nobody makes cables like General.
Slide Action Chuck: With a quick movement of the Grip
Shield, you release or engage the cable – without the need
for a chuck, and with automatic adjustment for different cable
diameters. As a result, you get your cable into
the line faster, pull it out faster, and have
full control at all times. Because
the Slide Action Chuck is linked
to the Grip Shield, handling
is easy and comfortable.
Quick-Change Cable Cartridges:
To switch to a different diameter cable
you just loosen three screws, pull the front
of the drum off the cable, and load another cartridge.
Changing takes less than a minute and turns what
could be a messy job into a clean one.
Slide shield BACK
to grip cable…
Slide Grip Shield FORWARD
to release cable … It’s that quick!
Page 2
Super-Vee Units
Complete and Ready to Operate
SV-A-WC with case, 25 ft. x 1/4" (25HE1),
25 ft x 3/8" (25HE2) cables,
HECS cutter set and cartridges. Boxed wt. 32 lbs.
SV-B-WC with case, 25 ft. x 1/4" (25HE1),
35 ft x 3/8" (35HE2) cables,
HECS cutter set and cartridges. Boxed wt. 35 lbs.
SV-C-WC with case, 50 ft. x 1/4" (50HE1),
35 ft. x 3/8" (35HE2) cables,
HECS cutter set and cartridges. Boxed wt. 39 lbs.
SV-D-WC with case and 25 ft. x 5/16" (25HE1-A) cable.
Boxed wt. 25 lbs.
SV-F-WC with case and 25 ft.. x 1/4" (25HE1) cable.
Boxed wt. 21 lbs.
To order without case, delete suffix “WC”, as SV-A.
220/230 & 240 Volt/50 Hz units are available.
Specifications:
Motor:
All ball-bearing, double-insulated, reversible motor
with variable speed control; 0 – 500 rpm.
Drum:
Heavy gauge stamped aluminum with inner drum
to prevent cable tangling.
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable. All cables
are left hand wound and reinforced with a wire rope center.
Cutter Set:
See below.
Cable Cartridges:
Light weight, impact resistant plastic.
Slide Action Chuck:
Grip shield moves back to engage cable, forward to release it.
Automatically adjusts for different diameter cables.
U
L
C
US
AH
Arrow Head
Starting Drill
BG
Boring Gimlet
Options
DHF
All-Purpose Down Head Fitting
Can be used with all standard
HECS cutters.
5-Piece Cutter Set
For Use Only With Cables Having Connectors
DHBG
Down Head Boring Gimlet
CAA
1-1/4 SCB
1-1/4" Side Cutter Blade
(2 piece set)
Closet Auger
Attachment
Guides 1/4" or 5/16"
cable into bowl
FAH
Flexible Spring
Arrow Head Cutter
MCC
Carrying Case
McKees Rocks, PA 15136 USA
800-245-6200 or 412-771-6300
© General Wire Spring Co. 2016 C-SV-0816
Loading...