ToolSmart
TM
App
Instruction Guide
Digital Angle Finder
Angle Finder Pairing
Tap Toolbox
button
Wait for
phone and
Angle Finder
to pair
Tap ConnectTap Angle
Finder button
Press the yellow On/Off button to turn on
device and to turn on Bluetooth. “B” will
start blinking on screen.
2 3
4 5
1
Angle Finder Dashboard
Short press Bluetooth
button to send to phone
Title the measurement
and press Save to store
in the databank
3
After connecting, the
app opens to the
Dashboard screen
1 2
Angle Finder Miter Angle Calculator
Press the calculator
button
View the
results
Click and drag the measurement from
the data bank below. Drop it in the
“Angle” field. Values can also be manually
typed into these fields.
1 32
Angle Finder Crown Moulding Calculator
Press the calculator
button
View the
results
Click and drag the measurement from
the data bank below. Drop it in the “Wall
Angle” field. Values can also be manually
typed into these fields.
1 4
2
Select your Spring Angle
3
Taking a Picture for Angle Finder
You could elect to take a
new photo or choose
one from your phone’s
gallery.
When taking a photo, tap the circular
capture button on the bottom center
of the screen. If necessary, tap the
lightning bolt button in the top left
corner of the screen to adjust the
camera’s flash. Tap the flip camera
button in the top right corner of the
screen to activate the front facing
camera.
From the dashboard, tap
the camera button in the
bottom center of the
screen to access the
camera.
Finally choose whether to
keep the photo that was
taken or retake a new photo
by tapping one of those
options in the bottom corners
of the screen.
31 2
4
Angle Finder Picture Gallery
From the
dashboard, tap the
gallery button in
the lower left
corner of the
screen
Tap the photo you
would like to add your
measurements to.
Tap the button on the bottom center to
display your previously logged measurements.
Then swipe the bar with the values until you
can see the desired value and tap and drag
that value to its respective line (value is
entered when the line turns orange). Custom
values may be entered by tapping the line and
double tapping the box that appears. When all
measurements are finalized, save your new
picture to the gallery by tapping the save
button in the bottom right corner of the page.
The drawn angle
can be moved
and adjusted by
tapping and
dragging the
three points of
the angle and the
linear parts.
Tap somewhere on
the picture to place
an arbitrary angle.
1
2 3
4
5
Angle Finder Settings
From the dashboard
page, tap the settings
button at the bottom
right corner of the page
to view the settings.
Tap the auto save button to automatically
save measurements (the Bluetooth
button still needs to be clicked to transfer
the value on the LDM to the app).
1 2
Universal App Settings
Click the Hamburger
Menu (triple bar button)
at the top left corner of
the page.
From here, you can change the units of
measurement (which applies to all tools),
have the captured images save to the
phone’s gallery, and view the terms &
conditions and privacy policy.
Tap the settings button
1 32
Loading...