The TS07 Flashlight Inspection Camera is ideal for making
inspections of equipment and areas that are open enough to
not require the maneuverability of a flexible borescope probe.
Lighting for the line-of-sight camera is provided by a
powerful LED flashlight that can be used independently. One
2
obvious application for the TS07 is documenting—with highdefinition, date- and time-stamped video and photos—the
rounds of security guards.
The TS07 can be used as a standalone flashlight, or with
™
General’s free ToolSmart
When used in concert with an iPhone
app running on your mobile phone.
®
or Android
™
smartphone, the TS07 can stream—via a self-generated local
WiFi hotspot (without Internet access)—to the phone all live
video it “sees”. The phone initiates the transfer using the
ToolSmart
™
app, which can be downloaded from the iTunes
®
App Store or Google Play Store.
Soft buttons on the app can be pressed to save video clips
and capture still photos of the video stream.
iPhone®and iTunes®are trademarks of Apple Inc., registered in the U.S.
and other countries.
™
Android
is a trademark of Google Inc.
KEY FEATURES
• Combines a powerful LED flashlight with a high-definition
video recording camera
• LED flashlight can be used separately or to illuminate
camera’s field of view. Brightness and illumination modes
(including fast strobe and “S-O-S” transmission in Morse
code) are controllable from front panel.
• Aluminum flashlight/camera head cover, with knurled
non-slip thermoplastic elastomer (TPE) grip and rubber
overmold
3
SAFETY INSTRUCTIONS
The flashlight section of the Flashlight Inspection Camera
uses three 2-watt LED lights that are powerful enough to
disorient or cause short-term vision problems for anyone
looking directly at them. Avoid staring at those lights—
especially when the flashlight is operated in full power or fast
strobe mode.
Keep the TS07 out of the hands of children.
Do not use the Flashlight Inspection Camera in the presence
of flammable or explosive gases.
WHAT’S IN THE PACKAGE
The Flashlight Inspection Camera comes in a display box
along with a rechargeable Lithium-ion battery and a USB
charging cable.
1. Flashlight Inspection Camera
2. Rechargeable Lithium-ion battery
3. USB charging cable
4
PRODUCT OVERVIEW
A. Camera head
B. LED lights
C. Charging jack
(under top cover)
A
B
C, D
F
G
D. Reset button (under top
cover, 180º opposite
charging jack)
E
H
E. Flashlight/camera head
cover
J
F. WiFi camera button.
Press and hold for three seconds to turn on camera
head and generate local WiFi network (without Internet
access). Press and hold again to turn off camera head and
network.
G. Flashlight power button. See the Operating Instructions
section of this manual for lighting options.
H. Flashlight power indicator. Glows steady green when
flashlight LEDs are powered on. Flashes green when
battery is low on charge.
I. WiFi indicator. Glows steady blue when camera head and
WiFi network are powered on. Glows steady green when
battery is charging. Flashes green when battery is low on
charge.
J. Battery compartment
K. Wrist strap attachment hole
I
K
5
SETUP INSTRUCTIONS
CHARGE BATTERY
During charging, the TS07 can be used as a flashlight, but not
as a WiFi video camera. Charging may take up to eight hours.
To charge the battery:
1. Power off the TS07 by pressing and holding the and
buttons (Callouts F and G on page 5).
2. Unscrew and remove the battery compartment
(Callout J).
3. Remove and discard the clear plastic battery activation
disc.
4. Insert the cylindrical plug end of the included USB cable
into the jack exposed by unscrewing the head (Callout C),
and the full-size (standard-A) USB plug at the other end
into a USB port of your computer or a socket of a USB
AC power adapter.
If you do not already own a USB AC power adapter (most
smartphones include one), you can purchase one on-line
or at many retail stores for less than $5. Be aware that
“trickle” charging the TS07 through a USB port of your
computer will take much longer than charging it from an
AC outlet.
5.
During charging, the Wi-Fi indicator LED (Callout I)
will blink/flash green.
When the battery is fully charged the LED’s color will
6.
switch to solid green.
7. Replace the flashlight/camera head cover and hand-
tighten it.
6
OPERATING INSTRUCTIONS
USING THE FLASHLIGHT
The button controls the TS07’s flashlight:
• To turn on the flashlight
at a 100% power level,
briefly press the button
once.
• Briefly press the again
to lower the power level
to 50%.
• Briefly press the
button again to lower the
power level to 25%.
• Briefly press the
button again to switch the flashlight to fast strobe mode.
• Briefly press the button again to use the flashlight to
signal S-O-S in Morse code.
• Briefly press the button again to return the flashlight to
a 100% power level.
To turn off the flashlight, press and hold thebutton.
USING THE WIFI CAMERA
To use the TS07 with your phone, begin by downloading
the ToolSmart
Store and installing it on your phone. Then, press the
button on the TS07 to power on the camera head and
generate a local WiFi hotspot. Next, detect and connect to this
hotspot (IP Borescope) after activating WiFi reception on your
phone.
™
app from the iTunes Store or Google Play
7
A tutorial on the app explains how to use it to capture video
clips and photos using the TS07’s camera, save the files to
your phone, and integrate the information in the files with
™
data from other ToolSmart
products.
SPECIFICATIONS
Camera Lighting: Three 2-watt LEDs delivering 150, 300 and
600 lumens at 25%, 50% and 100% power
Camera Field of View/Depth of Field: 62°/2.4 in. (60mm) to
infinity
Video Resolution: HD (1280 x 720 pixels)
Water/Dust Ingress Protection Level: IP54
WiFi Standard: 802.11 b/g/n
WiFi Frame Frequency: 30 fps
Fast Strobe Frequency: 8Hz
Operating Temperature: 32° to 113°F (0° to 45ºC)
@ <95%RH
Dimensions: 7.4 (L) x 1.6 in. (Dia.)/188 x 40mm, with camera
head diameter of 2.3 in. (58mm)
Weight (with battery): 13 oz. (370g)
Power Source: 3.7V, 3200mAh rechargeable Li-ion battery
(included)
Battery Life: 1.2
50% brightness, 3.5 hours @ 25% brightness; 6 hours with
LEDs off and WiFi on
5 hours @ 100% LED brightness, 2 hours @
8
OPERATING & MAINTENANCE TIPS
When both LEDs on the Flashlight Inspection Camera begin
flashing green to indicate that that the battery is becoming
low on charge, charge the battery by connecting the TS07 to
a power source, using the “Charge Battery” Setup
instructions on page 6 as a guide.
The TS07 is not equipped with an Auto Power Off (APO)
feature that would automatically power off the unit after a
fixed period of inactivity. To avoid having to recharge the
battery often, remember to power off both the flashlight and
the WiFi camera head when you are finished using them.
When left in the Flashlight Inspection Camera for an extended
period of time, the Lithium-ion battery may corrode and
release toxic chemicals capable of permanently damaging the
unit. Remove the battery when preparing the TS07 for longterm storage, and also when you do not intend to use it for
weeks or months.
Use an anti-static microfiber cloth to clean the TS07 housing
and other structures. Never use abrasive or chemical cleaning
agents.
WARRANTY INFORMATION
General warrants its instruments and accessories, and digital
tools products against defects in material or workmanship for
one year from the date of purchase unless otherwise stated
on the packaging, manual, and/or marketing materials.
General also warrants its non-digital tools products against
defects in material or workmanship on a limited lifetime term.
General will replace or repair the defective unit, at its option,
subject to verification of the defect.
9
This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or
unreasonable use of the product. It also does not cover
products purchased from unauthorized distributors. A proof of
purchase must accompany each warranty claim.
Any implied warranties arising from the sale of a General
product, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are
limited to the above.
General shall not be liable for loss of use of the product or
other incidental or consequential damages, expenses, or
economic loss, or for any claim of such damage, expenses, or
economic loss.
State laws vary. The above limitations or exclusions may not
apply to you.
For more details or to file a warranty claim, contact General
Tools & Instruments Technical Support at
techsupport@generatools.com.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable
product of superior quality. However, in the event your
instrument requires repair, please contact our Customer
Service to obtain an RGA (Return Goods Authorization)
number before forwarding the unit via prepaid freight to the
attention of our Service Center at this address:
General Tools & Instruments
75 Seaview Drive Secaucus, NJ 07094
Remember to include a copy of your proof of purchase, your
return address, and your phone number and/or e-mail
address.
10
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to a different circuit than the one
the receiver is connected to.
• Consult your supplier or an experienced radio/TV technician
for help.
11
General Tools & Instruments
GeneralToolsNYC
Visit us at www.TestEquipmentDepot.com
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.