General Tools General Tools GPK005 Manual
GPK005/GPK015/GPK035
GPK005/GPK015/GPK035
GPK005/GPK015/GPK035
INSTRUCTION MANUAL
INSTRUCTION MANUAL
INSTRUCTION MANUAL
GAS PRESSURE KITS
Please read this manual carefully and thoroughly before using this product.
Get accurate pressure readings when checking
and setting manifold pressure of furnaces and
appliances that use natural gas or LP gas
OPERATING INSTRUCTIONS:
1. Turn off gas. Remove gas inlet supply/
manifold fitting.
2. Use hose clamp to attach non-flared end
of tubing to gauge
3. Install supplied brass fitting into manifold
4. Push flared end of tubing onto barbed end
of brass fitting. Turn on gas and begin
pressure test.
5. Remove hose
6. Reassemble manifold
NOTE
tap gauge lightly to relieve any built-up friction
CAUTION!
Handle carefully.
The special diaphragm gauge is very sensitive.
Do not drop!
Do not over pressurize!
: Before taking final pressure reading,
APPLICATIONS:
• Home
• Office
• Factory
• Appliances
• Piping
• Recreational Vehicles
FEATURES:
• Measure natural gas (methane) or LP gas
pressure across appliance manifolds
• Test gas stoves, furnaces, dryers and other
gas appliances. Can also be used for other
corrosive gases.
• Large 2.5 in. diameter diaphragm gauge
is calibrated in inches of water column,
also shows ounces per square inch
(GPK015/GPK035 only)
• Magnified lens
• Easier to use than a manometer
• GPK005 is calibrated in psi and meets
requirements of Section 406.4 of the
NEW YORK CITY FUEL GAS CODE (2008)
SPECIFICATIONS:
• GPK005 Range: 0 to 5 psi
• GPK015 Range: 0 to 15 inches of water
column (in. H
square inch (oz./in
O)/0 to 9 ounces per
2
2
)
• GPK035 Range: 0 to 35 inches of water
column (in. H
square inch (oz./in
O)/0 to 20 ounces per
2
2
)
• Measurement Accuracy (all models):
±1.5% of full-scale range
• Dimensions: 2.5 in. gauge, 39 in. rubber tubing
• Weight: 10.2 oz. (285g)
INCLUDES:
2.5 in. diameter diaphragm gauge, 39 in.
of rubber tubing, 3/8 in. NPT brass fitting
for quick connection to appliance manifold,
hose clamp, molded hard case
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Specifications subject to change without notice
NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
©2015 GENERAL TOOLS & INSTRUMENTS
INSTRUC#GPK005/GPK015/GPK035 05/11/15
General Tools & Instruments
GeneralToolsNYC