General Technologies CT6100 User Manual

General Technologies Corp.



















  

CT6100

Fuse Socket Connectors

1. SAFETY RULES

These connectors are designed for use at temperatures between 0°C to 40°C

•

and altitudes up to 2,000m.

To ensure that the connectors are used safely, follow all safety and operating

•

instructions in this operation manual.

Do not use the connectors if they appear damaged.

•

When using the connectors, keep your ngers on the plastic insulating body,

•

and away from the metal contacts.

Disconnect any wire, lead, or alligator clips before inserting or extracting the

•

connector.

Make sure power is off before cutting, desoldering, or breaking the circuit wires.

•

Small amounts of current can be dangerous.

Do not use on circuits powered with more than 30 VDC.

•

To avoid electrical shock, use CAUTION when working above 60V DC or 25V

•

AC rms. Such voltages pose a shock hazard.

To avoid electrical shock or damage to the connectors, do not exceed the input

•

limits.

2. INTERNATIONAL SYMBOLS

Important information Dangerous Voltages

see manual Continuity
AC Ground
DC Double Insulation

4. OPERATION

4.1 Connectors Description

1) Connector contacts tabs

2) Insulating plastic body

3) Fuse socket contacts

4.2 Connection to fuse sockets

CAUTION: Remove if possible the power from the socket,

otherwise disconnect all loads from the socket
circuits. Always disconnect any test leads or
wires attached to the connector tabs before
proceeding to insert the connector into the
fuse socket.

3. TECHNICAL SPECIFICATIONS

Connection Tabs

3.1 General Specifications

Fuses Compatibility: Mini, ATO (ATC) and Maxi size automotive
blade fuses
Contacts Material: Nickel plated bronze
Connector Contacts Tabs: 1/4 Inch Quick Connects
Insulating Body: ABS
Dimentions (LxWxD): Mini 1.47 x 0.91 x 0.19 Inches

37.3 x 23.1 x 4.83 mm
ATO/ATC 1.58 x 0.94 x 0.19 Inches

40.1 x 23.9 x 4.83 mm
Maxi 2.01 x 1.16 x 0.30 Inches

51.1 x 29.5 x 7.62 mm
Weight: Mini 0.11 Oz. (3.12 g)
ATO/ATC 0.17 Oz. (4.58 g)

5. MAINTENANCE

CAUTION: Do not submerge the connectors on any

Maxi 0.34 Oz. (9.16 g)

3.2 Electrical Specifications

Do not exceed the maximum input voltage and/or current to prevent

•

injury and damage to the connectors and/or sockets.

CAUTION: These connectors do not provide overcurrent

protection for the circuits, therefore when
used to supply current to loads, an external
current limiting device should be added to the

5.1 Cleaning

Periodically wipe the connectors with a soft damp cloth and mild household
cleanser. Do not use abrasives or solvents. Ensure that no water gets inside
the plastic insulating body to prevent possible shorts and damage.

6. WARRANTY

One year limited warranty, For details see Standard Warranty Informa­tion in our webpage or you may request a printed copy..

circuit.

Size Max. Rated Voltage Max. Rated current

Mini 32 VDC 20 ADC

ATO/ATC 32 VDC 30 ADC

Maxi 32 VDC 40 ADC

#121 - 7350 72nd Street Tel.: [phone]
Delta, BC Fax: [phone]
Canada V4G 1H9 www.generaltechnologies.net

Connector

Fuse Block

liquid, as they may become permanently
damaged, and unsafe for use.

General Technologies Corp.

© Copyright 2001 General Technologies