General Semiconductor UGB10DCT, UGB10CCT, UGB10BCT, UGB10ACT Datasheet

NEW PRODUCT NEW PRODUCT NEW PRODUCT

-T-

SEATING

PLATE

0.380 (9.65)

0.420 (10.67)

0.320 (8.13)

0.360 (9.14)

0.575 (14.60)

0.625 (15.88)

0.027 (0.686)

0.037 (0.940)

0.160 (4.06)

0.190 (4.83)

0.045 (1.14)

0.055 (1.40)

0.018 (0.46)

0.025 (0.64)

0.080 (2.03)

0.110 (2.79)

0.090 (2.29)

0.110 (2.79)

0.245 (6.22) MIN

- HEATSINK

PIN 1

0.095 (2.41)

0.100 (2.54)

PIN 2

0.047 (1.19)

0.055 (1.40)

UGB10ACT THRU UGB10DCT

ULTRAFAST SOFT RECOVERY RECTIFIER

Reverse Voltage - 50 to 200 Volts Forward Current - 10.0 Amperes

TO-263AB

FEATURES

♦ Plastic package has Underwriters Laboratories

Flammability Classification 94V-0

♦ Ideally suited for free wheeling diode power factor

correction applications

♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering in accordance with

CECC 802 / Reflow guaranteed

♦ Glass passivated chip junction

MECHANICAL DATA

Case: JEDEC TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750,

Method 2026

Polarity: As marked Mounting Position: Any Mounting T orque: 5 in. - lbs.max. Weight: 0.08 ounce, 2.24 grams

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS UGB10ACT UGB10BCT UGB10CCT UGB10DCT UNITS

Maximum repetitive peak reverse voltage V Working peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current at T

=100°C I

RRM

RWM

RMS

(AV)

Peak forward surge current

8.3ms single half sine-wave superimposed I

FSM

on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg at I

Maximum reverse leakage current per leg T at working peak reverse voltage T

Maximum reverse recovery time per leg at I

Maximum reverse recovery time per leg at Maximum 25 I

Maximum reverse recovery current per leg at I

Maximum stored charge per leg Maximum 5.5 I

=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 I

=0.5A, IR=1.0A, Irr=0.25A Typical

=5A, di/dt=50A/µs,VR=30V

=2A, di/dt=20A/µs, VR=30V Irr=0.1 I

Typical ther mal resistance from junction to case per leg R Operating junction and storage temperature range T

=10A, TJ=25°C 1.25

=5A, TJ=25°C V

=5A, TJ=150°C 0.895

=25°C 10

=100°C

Typical

ΘJC

, T

STG

50 100 150 200 Volts 50 100 150 200 Volts 35 70 105 140 Volts 50 100 150 200 Volts

-40 to +150 °C

10 Amps

60 Amps

1.10 Volts

200

µA

25 ns

0.7 Amps

4.5

4.5 °C/W

4/98

0 25 50 75 100 125 150

1 10 100

100

0.2 0.4 0.6 0.8 1.0 1.2 1.4

0.01

0.1

100

25 50 75 100 125

0.1 1 10 100

100

20 40 60 80 100

0.1

100

1,000

RATINGS AND CHARACTERISTIC CURVES UGB10ACT THRU UGB10DCT

FIG. 1 -FORWARD CURRENT DERATING CURVE

RESISTIVE OR INDUCTIVE LOAD

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT PER LEG

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

=105°C

AVERAGE FORWARD CURRENT, AMPERES

CASE TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS PER LEG

TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE

TJ=125°C

AMPERES

TJ=100°C

AMPERES

PEAK FORWARD SURGE CURRENT,

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

PER LEG

TJ=125°C

TJ=100°C

MICROAMPERES

TJ=25°C

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

VOLTS

FIG. 5 - REVERSE SWITCHING CHARACTERISTICS

PER LEG

nC/ns

@2A, 20A/µs

STORED CHARGE/REVERSE RECOVERY TIME,

JUNCTION TEMPERATURE, °C

@2A, 20A/µs

@5A, 50A/µs

@1A, 100A/µs

@5A, 50A/µs

@1A, 100A/µs

TJ=25°C

INSTANTANEOUS REVERSE LEAKAGE CURRENT,

PERCENT OF RATED PEAK REVERSE

VOLTAGE, %

FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG

TJ=125°C f=1.0 MHz Vsig=50MVp-p

CAPACITANCE, pF

REVERSE VOLTAGE, V OLTS