General Semiconductor TMPG06-8.2A, TMPG06-8.2, TMPG06-7.5A, TMPG06-7.5, TMPG06-6.8A Datasheet
...
TMPG06-6.8 THRU TMPG06-43A
AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 43 Volts Peak Pulse Power - 400 Watts
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Designed for the hood applications
♦ Available in uni-directional only
♦ Exclusive patented PAR™ oxide passivated
chip construction
♦ 400W peak pulse power capability on
10/1000µs waveform, repetition rate (duty cycle): 1.0%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0ps from 0 Volts to V
(BR)
♦ For devices with V
(BR)
≥10V, IDare typically less than
1.0µA
♦ High temperature soldering guaranteed:
300°C/10 seconds 0.375 (9.5mm) lead length,
5lbs (2.3 kg) tension
MECHANICAL DATA
Case: Molded plastic over a passivated junction
Terminals: Axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Mounting Position: Any
Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOL VALUE UNITS
Peak power dissipation with a 10/1000µs
waveform
(NOTE 1, FIG. 1)
P
PPM
Minimum 400 Watts
Peak pulse power current with a 10/1000µs
waveform
(NOTE1,2, FIG. 3)
I
PPM SEE TABLE 1
Amps
Steady state power dissipation at T
L
=75°C
lead lengths 0.25” (6.33mm)
(NOTE 2)
P
M(AV)
1.0 Watts
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method)
(NOTE 3)
I
FSM
40.0 Amps
Maximum instantaneous forward voltage at 25A
(NOTE 3)
V
F
3.5 Volts
Operating junction and storage temperature range T
J
, T
STG
-65 to +185 °C
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25°C per Fig. 2
(2) Mounted on copper pads area of 1.6 x 1.6” (40 x 40mm)
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
1/25/99
Case Style TMPG-06
Dimensions in inches and (millimeters)
Patent #’s 4,980,315
5,166,769
5,278,094
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.125 (3.18)
0.115 (2.92)
0.090 (2.29)
0.025 (0.635)
0.025 (0.559)
0.100 (2.54)
Available in uni-directional only
PATENTED
*
*
ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1
Maximum Maximum
Breakdown Voltage Maximum Reverse Peak Pulse Temperature
V
(BR)
Test Stand-off Reverse Leakage Current Maximum Coefficient
Volts
(NOTE 1)
Current Voltage Leakage at Vw
M
I
PPM
Clamping of
at I
T
VWm at V
WMTJ
=150°C
(NOTE 2)
Voltage at l
PPM
V
(BR)
Device Type MIN MAX (mA) (Volts) ID (µA) ID (µA) (Amps) VC (Volts) (% / °C)
TMPG06-6.8 6.12 7.48 10.0 5.50 300 1000 27.8 10.8 0.057
TMPG06-6.8A 6.45 7.14 10.0 5.80 300 1000 28.6 10.5 0.057
TMPG06-7.5 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060
TMPG06-7.5A 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061
TMPG06-8.2 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065
TMPG06-8.2A 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065
TMPG06-9.1 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068
TMPG06-9.1A 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068
TMPG06-10 9.00 11.0 1.0 8.10 5.0 20.0 26.7 15.0 0.073
TMPG06-10A 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073
TMPG06-11 9.90 12.1 1.0 8.92 2.0 10.0 24.7 16.2 0.075
TMPG06-11A 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075
TMPG06-12 10.8 13.2 1.0 9.72 1.0 5.0 23.1 17.3 0.076
TMPG06-12A 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078
TMPG06-13 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081
TMPG06-13A 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081
TMPG06-15 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084
TMPG06-15A 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084
TMPG06-16 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086
TMPG06-16A 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086
TMPG06-18 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088
TMPG06-18A 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088
TMPG06-20 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090
TMPG06-20A 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090
Loading...