General Semiconductor SRP600K, SRP600J, SRP600G, SRP600D, SRP600B Datasheet

...

SRP600A THRU SRP600K

0.052 (1.32)

0.048 (1.22)

0.360 (9.1)

0.340 (8.6)

DIA.

1.0 (25.4) MIN.

0.360 (9.1)

0.340 (8.6)

1.0 (25.4) MIN.

FAST SWITCHING PLASTIC RECTIFIER

Reverse Voltage - 50 to 800 Volts Forward Current - 6.0 Amperes

Case Style P600

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 600A 600B 600D 600G 600J 600K UNITS

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current

0.375" (9.5mm) lead length at T

=55°C

Peak forward surge current

8.3ms single half sine-wave superimposed on I rated load (JEDEC Method)

Maximum instantaneous forward voltage at 6.0A V Maximum DC reverse current T

at rated DC blocking voltage T Maximum reverse recovery time Typical junction capacitance Typical thermal resistance

(NOTE 1)

(NOTE 2)

(NOTE 3)

=25°C 10.0 µA

=100°C

Operating junction temperature range T Storage temperature range T

FEATURES

♦ Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

♦ High surge current capability ♦ Construction utilizes void-free molded plastic technique ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed:

250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: Void-free molded package body Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.07 ounce, 2.1 grams

SRP SRP SRP SRP SRP SRP

RRM RMS

(AV)

FSM

ΘJA

G -50 to +150 °C

50 100 200 400 600 800 Volts 35 70 140 280 420 560 Volts 50 100 200 400 600 800 Volts

6.0 Amps

300.0 Amps

1.3 Volts

1.0 mA

100 100 150 150 200 200 ns

300.0 pF

10.0 °C/W

-50 to +125 °C

NOTES:

(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, with both leads equally to heat sink

4/98

020406080100

0.01

0.1

20 40 60 80 100 120 140 160 180

1.0

2.0

3.0

4.0

5.0

6.0

7.0

75 80 85 90 95 100 105 110 115 120 125

110100

100

150

200

250

300

350

400

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

5.0

0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

0.1

100

RATINGS AND CHARACTERISTIC CURVES SRP600A THRU SRP600K

FIG. 1 - FORWARD CURRENT DERATING CURVE

RESISTIVE OR INDUCTIVE LOAD

Ipk/I

AV = π

CAPACITIVE LOADS

5.0 = Ipk/I

10 20

AMPERES

AVERAGE FORWARD CURRENT,

1.1 x 1.1” (30 x 30mm) COPPER PADS

AMBIENT TEMPERATURE, °C

FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD

SURGE CURRENT

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

TJ=25°C

FIG. 2 - FORWARD CURRENT DERATING CURVE

RESISTIVE OR INDUCTIVE LOAD

L=0.12”(3.2mm)

AMPERES

AVERAGE FORWARD CURRENT,

L=0.25”(6.3mm)

L=0.375”(9.5mm)

L=0.62”(15.9mm)

1.6 x 1.6 x 0.04” (40 x 40 x 1mm) COPPER HEAT SINKS

L=LEAD LENGTH

LEAD TEMPERATURE, °C

FIG. 4 - TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS

TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE

AMPERES

TJ=125°C

PEAK FORWARD SURGE CURRENT,

FIG. 5 - TYPICAL REVERSE CHARACTERISTICS

MICROAMPERES

NUMBER OF CYCLES AT 60 H

TJ=100°C

TJ=50°C

TJ=25°C

JUNCTION TO LEAD,°C/W

INSTANTANEOUS REVERSE CURRENT,

RΘJL, THERMAL RESISTANCE FROM

PERCENT OF RATED PEAK REVERSE VOLTAGE, %

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 6 - TYPICAL THERMAL RESISTANCE

L=LEAD LENGTH

COPPER HEATSINKS

EQUAL LEAD LENGTHS TO HEAT SINK, INCHES

VOLTS