General Semiconductor SBL1630CT Datasheet
SBL1630CT AND SBL1640CT
0.415 (10.54) MAX.
0.154 (3.91)
0.148 (3.74)
DIA.
0.113 (2.87)
0.103 (2.62)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
0.160 (4.06)
0.140 (3.56)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.35)
0.110 (2.79)
0.100 (2.54)
PIN
1
2
3
PIN 1
PIN 3
CASE
1.148 (29.16)
1.118 (28.40)
0.105 (2.67)
0.095 (2.41)
0.410 (10.41)
0.390 (9.91)
0.105 (2.67)
0.095 (2.41)
0.635 (16.13)
0.625 (15.87)
0.560 (14.22)
0.530 (13.46)
PIN 2
0.370 (9.40)
0.360 (9.14)
SCHOTTKY RECTIFIER
Reverse Voltage - 30 and 40 Volts Forward Current - 16.0 Amperes
TO-220AB
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Dual rectifier construction, positive center tap
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting T orque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current
=95°C
at T
C
Peak forward surge current, 8.3ms single
half sine-wave superimposed on rated load I
(JEDEC Method)
Maximum instantaneous forward voltage
per leg at 8.0A
Maximum instantaneous reverse current at T
rated DC blocking voltage per leg
Typical thermal resistance per leg
Operating junction and storage temperature range T
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Thermal resistance from junction to case per leg
(NOTE 1)
(NOTE 1)
(NOTE 2)
=25°C 0.5
C
TC=100°C
SYMBOLS SBL1630CT SBL1640CT UNITS
30 40 Volts
21 28 Volts
30 40 Volts
16.0 Amps
250.0 Amps
0.55 Volts
50.0
mA
2.0 °C/W
-40 to +125 °C
R
J
RRM
RMS
I
(AV)
FSM
V
I
ΘJC
, T
DC
F
R
STG
4/98
0.01 0.1 1 10 100
0.1
1
10
100
0 50 100 150
0
4
8
12
16
20
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0.01
0.1
1
10
50
1 10 100
0
50
100
150
200
250
300
0.1 1 10 100
100
1,000
4,000
020406080100
0.001
0.01
0.1
1
10
50
RATINGS AND CHARACTERISTIC CURVES SBL1630CT AND SBL1640CT
FIG. 1 - FORWARD CURRENT DERATING CURVE
RESISTIVE OR INDUCTIVE LOAD
AMPERES
AVERAGE FORWARD CURRENT,
LEAD TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=125°C
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER LEG
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
AMPERES
PEAK FORWARD SURGE CURRENT,
NUMBER OF CYCLES AT 60 H
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS PER LEG
TJ=125°C
Z
TJ=25°C
AMPERES
INSTANTANEOUS FORWARD CURRENT,
INSTANTANEOUS FORWARD VOLTAGE,
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
VOLTS
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
TJ=75°C
MILLIAMPERES
INSTANTANEOUS REVERSE CURRENT,
TJ=25°C
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 6 - TYPICAL TRANSIENT THERMAL
IMPEDANCE PER LEG
JUNCTION CAPACITANCE, pF
REVERSE VOLTAGE, VOLTS
TRANSIENT THERMAL IMPEDANCE, °C/W
t, PULSE DURATION, sec.
Loading...