General Semiconductor RGP30K, RGP30M, RGP30G, RGP30A, RGP30B Datasheet

...

RGP30A THRU RGP30M

0.210 (5.3)

0.190 (4.8) DIA.

0.052 (1.32)

0.048 (1.22) DIA.

1.0 (25.4) MIN.

0.375 (9.5)

0.285 (7.2)

1.0 (25.4) MIN.

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes

DO-201AD

PATENTED*

Dimensions in inches and (millimeters)

Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306

Glass-plastic encapsulation technique is covered by

FEATURES

♦ Plastic package has

Underwriters Laboratory Flammability Classification 94V-0

♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of

MIL-S-19500

♦ High temperature metallurgically bonded construction ♦ 3.0 Ampere operation at TA=55°C with no thermal

runaway

♦ Typical IRless than 0.2µA ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed

350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-201AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.12 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 30A 30B 30D 30G 30J 30K 30M UNITS

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current

0.375" (9.5mm) lead length at T

=55°C

Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)

Maximum instantaneous forward voltage at 3.0A V Maximum DC reverse current T

at rated DC blocking voltage T

=25°C 5.0

=125°C

Maximum full load reverse current, full cycle average

0.375" (9.5mm) lead length at T Maximum reverse recovery time Typical junction capacitance Typical thermal resistance Operating junction and storage temperature range T

NOTES:

(1) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B.mounted

(NOTE 2)

(NOTE 3)

=55°C

(NOTE 1)

RRM RMS

(AV)

FSM

R(AV)

ΘJA

J,TSTG

RGP RGP RGP RGP RGP RGP RGP

50 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts

3.0 Amps

125.0 Amps

1.3 Volts

100.0

µA

100.0 µA

150 250 500 ns

60.0 pF

20.0 °C/W

-65 to +175 °C

4/98

0 25 50 75 100 125 150 175

1.0

2.0

3.0

4.0

110100

100

200

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

100

110100

020406080100

0.01

0.1

RATINGS AND CHARACTERISTIC CURVES RGP30A THRU RGP30M

FIG. 1 - FORWARD CURRENT DERATING CURVE

AMPERES

0.375" (9.5mm) LEAD LENGTH

AVERAGE FORWARD RECTIFIED CURRENT,

AMBIENT TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS

TJ=25°C PULSE WIDTH=300µs

RESISTIVE OR INDUCTIVE LOAD

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

TJ=TJmax.

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

CURRENT, AMPERES

PEAK FORWARD SURGE

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

TJ=125°C

TJ=100°C

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

VOLTS

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

TJ=25°C f=1.0 MH

Vsig=50mVp-p

JUNCTION CAPACITANCE, pF

REVERSE VOLTA GE, VOLTS

TJ=75°C

MICROAMPERES

TJ=25°C

INSTANTANEOUS REVERSE LEAKAGE CURRENT,

PERCENT OF RATED PEAK REVERSE

VOLTAGE, %