General Semiconductor RGP25G, RGP25J, RGP25K, RGP25M, RGP25A Datasheet
...
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
0.210 (5.3)
0.190 (4.8)
DIA.
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
®
Reverse Voltage - 50 to 1000 Volts Forward Current - 2.5 Amperes
PATENTED*
RGP25A THRU RGP25M
DO-201AD
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ 2.5 Ampere operation at TA=55°C with no thermal
runaway
♦ Typical IRless than 0.2µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
FEATURES
Dimensions in inches and (millimeters)
*
Patent No.3,996,602 and brazed-lead assembly by Patent No 3,930,306
Glass-plastic encapsulation technique is covered by
Case: JEDEC DO-201AD molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.12 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 25A 25B 25D 25G 25J 25K 25M UNITS
Maximum repetitive peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current
0.375" (9.5mm) lead length at T
=55°C
A
Peak forward surge current 8.3ms single half sinewave superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.5A V
Maximum DC reverse current T
at rated DC blocking voltage T
=25°C 5.0
A
=125°C
A
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length at T
Maximum reverse recovery time
Typical junction capacitance
Typical thermal resistance
Operating junction and storage temperature range T
NOTES:
(1) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B.mounted
A
(NOTE 2)
(NOTE 3)
=55°C
(NOTE 1)
R
J
RRM
RMS
I
(AV)
I
FSM
C
, T
DC
F
I
R
I
R
t
rr
J
ΘJA
STG
MECHANICAL DATA
RGP RGP RGP RGP RGP RGP RGP
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
2.5 Amps
100.0 Amps
1.3 Volts
200.0
100.0 µA
150 250 500 ns
60.0 pF
20.0 °C/W
-65 to +175 °C
µA
4/98
1 10 100
10
100
20
50
100
150
180
0
1.0
2.0
3.0
10
100
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1.0
10
110100
2.5
0 20 40 60 80 100
0.01
0.1
1.0
10
20
RATINGS AND CHARACTERISTIC CURVES RGP25A THRU RGP25M
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
FIG. 1 - FORWARD CURRENT DERATING CURVE
RESISTIVE OR
INDUCTIVE LOAD
0.375" (9.5mm) LEAD LENGTH
AMBIENT TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
AMPERES
CHARACTERISTICS
TJ= 25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
CURRENT, AMPERES
PEAK FORWARD SURGE
NUMBER OF CYCLES AT 60 Hz
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
TJ=125°C
TJ=100°C
TJ=75°C
INSTANTANEOUS FORWARD CURRENT,
INSTANTANEOUS FORWARD VOLTAGE,
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
VOLTS
TJ=25°C
f=1.0 MH
Z
Vsig=50mVp-p
JUNCTION CAPACITANCE, pF
REVERSE VOLTA GE, VOLTS
MICROAMPERES
TJ=25°C
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
Loading...