General Semiconductor RGP20A, RGP20J, RGP20B, RGP20D, RGP20G Datasheet

RGP20A THRU RGP20J

0.210 (5.3)

0.190 (4.8) DIA.

0.042 (1.07)

0.037 (0.94) DIA.

1.0 (25.4) MIN.

0.375 (9.5)

0.285 (7.2)

1.0 (25.4)

MIN.

GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER

Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes

FEATURES

Case Style GP20

PATENTED*

Dimensions in inches and (millimeters)

Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306

Glass-plastic encapsulation technique is covered by

♦ Plastic package

has Underwriters Laboratory Flammability Classification 94V-0

♦ High temperature metallurgically

bonded construction

♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of

MIL-S-19500

♦ Fast switching for high efficiency ♦ 2.0 Ampere operation at TA=55°C with no thermal

runaway

♦ Typical IRless than 0.2µA ♦ High temperature soldering guaranteed:

350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: Molded plastic over solid glass body Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.03 ounce, 0.8 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 20A 20B 20D 20G 20J UNITS

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V

Maximum average forward rectified current

0.375" (9.5mm) lead length at TA=55°C Peak forward surge current

8.3ms single half sine-wave superimposed I on rated load (JEDEC Method)

Maximum instantaneous forward voltage at 2.0A V Maximum DC reverse current T

at rated DC blocking voltage T

=25°C 5.0

=125°C

Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at T

Maximum reverse recovery time Typical junction capacitance Typical thermal resistance Operating junction and storage temperature range T

NOTES:

(1) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B.mounted

(NOTE 1)

(NOTE 2)

(NOTE 3)

=55°C

RRM RMS

(AV)

FSM

R(AV)

ΘJA

, T

STG

RGP RGP RGP RGP RGP

50 100 200 400 600 Volts 35 70 140 280 420 Volts 50 100 200 400 600 Volts

2.0 Amps

80.0 Amps

1.3 Volts

100.0

µA

100.0 µA

150.0 250 ns

35.0 pF

22.0 °C/W

-65 to +175 °C

4/98

0 25 50 75 100 125 150 175

0.5

1.0

1.5

2.0

110100

100

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

110100

100

020406080100

0.01

0.1

0.01 0.1 1 10 100

0.1

100

RATINGS AND CHARACTERISTIC CURVES RGP20A THRU RGP20J

FIG. 1 - FORWARD CURRENT DERATING CURVE

AMPERES

0.375" (9.5mm) LEAD LENGTH

AVERAGE FORWARD RECTIFIED CURRENT,

AMBIENT TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS

FORWARD CHARACTERISTICS

TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE

AMPERES

INSTANTANEOUS FORWARD CURRENT,

RESISTIVE OR INDUCTIVE LOAD

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

TA=55°C

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

AMPERES

PEAK FORWARD SURGE CURRENT,

NUMBER OF CYCLES AT 60 Hz

FIG. 4 - TYPICAL REVERSE

CHARACTERISTICS

TJ=125°C

TJ=100°C

MICROAMPERES

TJ=75°C

TJ=25°C

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

VOLTS

TJ=25°C f=1.0 MH

Vsig=50mVp-p

JUNCTION CAPACITANCE, pF

REVERSE VOLTA GE, VOLTS

INSTANTANEOUS REVERSE CURRENT,

PERCENT OF RATED PEAK REVERSE

FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE

VOLTAGE, %

TRANSIENT THERMAL IMPEDANCE, °C/W

t, PULSE DURATION, sec.