General Semiconductor RGP15B, RGP15D, RGP15A, RGP15M, RGP15G Datasheet
...
RGP15A THRU RGP15M
0.034 (0.86)
0.028 (0.71)
0.140 (3.6)
0.104 (2.6)
DIA.
DIA.
1.0
MIN.
(25.4)
0.230 (5.8)
0.300 (7.6)
1.0
MIN.
(25.4)
®
GLASS PASSIVATED JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes
DO-204AC
♦ Plastic package has
♦ High temperature metallurgically
PATENTED*
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
♦ 1.5 Ampere operation at TA=55°C with no thermal
♦ Typical IRless than 0.1µA
♦ High temperature soldering guaranteed:
Dimensions in inches and (millimeters)
*
Patent No.3,996,602 and brazed-lead assembly by Patent No. 3,930, 306
Glass-plastic encapsulation technique is covered by
Case: JEDEC DO-204AC molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 15A 15B 15D 15G 15J 15K 15M UNITS
Maximum repetitive peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current
0.375" (9.5mm) lead length at T
=55°C
A
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.5A V
Maximum DC reverse current T
at rated DC blocking voltage T
=25°C 5.0
A
=150°C
A
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length at T
Maximum reverse recovery time
Typical junction capacitance
Typical thermal resistance
A
(NOTE 2)
(NOTE 3)
=55°C
(NOTE 1)
Operating junction and storage temperature range T
NOTES:
(1) Reverse recovery test conditions:IF=0.5A, IR=1A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B.mounted
4/98
RRM
RMS
I
(AV)
I
FSM
I
I
R(AV)
t
C
R
ΘJA
, T
J
DC
F
R
rr
J
STG
FEATURES
Underwriters Laboratory
Flammability Classification 94V-0
bonded construction
MIL-S-19500
runaway
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
RGP RGP RGP RGP RGP RGP RGP
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
1.5 Amps
50.0 Amps
1.3 Volts
200.0
100.0 µA
150 250 500 ns
25.0 pF
45.0 °C/W
-65 to +175 °C
µA
25 50 75 100 125 150 175
0
0.25
0.5
0.75
1.0
1.25
1.5
110100
0
10
20
30
40
50
0.4 0 .6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
1 10 100
1
10
100
0 20 40 60 80 100
0.01
0.1
1
10
20
0.01 0.1 1 10 100
0.1
1
10
100
RATINGS AND CHARACTERISTIC CURVES RGP15A THRU RGP15M
FIG. 1 - FORWARD CURRENT DERATING CURVE
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
0.375" (9.5mm) LEAD LENGTH
AMBIENT TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
RESISTIVE OR
INDUCTIVE LOAD
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
AMPERES
PEAK FORWARD SURGE CURRENT,
NUMBER OF CYCLES AT 60 H
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
TJ=125°C
Z
AMPERES
INSTANTANEOUS FORWARD CURRENT,
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 5 - TYPICAL JUNCTION
CAPACITANCE
TJ=25°C
f=1.0 MH
Z
Vsig=50mVp-p
TJ=75°C
PERES
TJ=25°C
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAM-
PERCENT OF RATED PEAK REVERSE
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
VOLTAGE, %
JUNCTION CAPACITANCE, pF
REVERSE VOLTA GE, VOLTS
TRANSIENT THERMAL IMPEDANCE (°C/W)
t, PULSE DURATION, sec
Loading...