General Semiconductor RGP10J, RGP10K, RGP10A, RGP10G, RGP10B Datasheet

...

RGP10A THRU RGP10M

0.107 (2.7)

0.080 (2.0)

0.034 (0.86)

0.028 (0.71)

DIA.

1.0 (25.4) MIN.

0.205 (5.2)

0.160 (4.1)

DIA.

NOTE:

Lead diameter is for suffix "E" part numbers

0.026 (0.66)

0.023 (0.58)

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere

DO-204AL

PATENTED*

Dimensions in inches and (millimeters)

Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306

Glass-plastic encapsulation technique is covered by

FEATURES

♦ Plastic package has

Underwriters Laboratory Flammability Classification 94V-0

♦ High temperature metallurgically

bonded construction

♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of

MIL-S-19500

♦ For use in high frequency rectifier circuits ♦ Fast switching for high efficiency ♦ 1.0 Ampere operation at TA=55°C with no thermal

runaway

♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed:

350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-204AL molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

Maximum recurrent peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current

0.375" (9.5mm) lead length at T Peak forward surge current 8.3ms single half sine-wave

superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A V Maximum full load reverse current, full cycle average

0.375" (9.5mm) lead length T Maximum DC reverse current T

at rated DC blocking voltage T Maximum reverse recovery time Typical junction capacitance Typical thermal resistance Operating junction and storage temperature range T

NOTES:

(1) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B.mounted

4/98

=55°C

(NOTE 2)

(NOTE 3)

=55°C

(NOTE 1)

=25°C 5.0

=150°C

SYMBOLS 10A 10B 10D 10G 10J 10K 10M UNITS

RRM RMS

(AV)

FSM

ΘJA

, T

RGP RGP RGP RGP RGP RGP RGP

50 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts

1.0 Amp

30.0 Amps

1.3 Volts

100.0 µA

200.0

150 250 500 ns

15.0 pF

55.0 °C/W

STG

-65 to +175 °C

µA

25 50 75 100 125 150 175

0.25

0.5

0.75

1.0

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

1 10 100

100

110100

020406080100

0.01

0.1

0.01 0.1 1 10 100

0.1

100

RATINGS AND CHARACTERISTIC CURVES RGP10A THRU RGP10M

FIG. 1 - FORWARD CURRENT DERATING CURVE

AMPERES

0.375" (9.5mm) LEAD LENGTH

AVERAGE FORWARD RECTIFIED CURRENT,

AMBIENT TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS

FORWARD CHARACTERISTICS

RESISTIVE OR INDUCTIVE LOAD

TJ=25°C

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

TJ=TJ max.

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

AMPERES

FORWARD SURGE CURRENT,

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE

CHARACTERISTICS

TJ=125°C

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

PULSE WIDTH=300µs 1% DUTY CYCLE

VOLTS

TJ=25°C f=1.0 MH

Vsig=50mVp-p

TJ=75°C

MICROAMPERES

INSTANTANEOUS REVERSE CURRENT,

TJ=25°C

PERCENT OF RATED PEAK REVERSE

FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE

VOLTAGE, %

JUNCTION CAPACITANCE pF

REVERSE VOLTA GE, VOLTS

TRANSIENT THERMAL IMPEDANCE (°C/W)

t, PULSE DURATION, sec