General Semiconductor P300A, P300G, P300D, P300J, P300M Datasheet

P300A THRU P300M

0.210 (5.3)

0.190 (4.8)
DIA.

0.052 (1.32)

0.048 (1.22)
DIA.

1.0 (25.4)
MIN.

0.375 (9.5)

0.285 (7.2)

1.0 (25.4)
MIN.

GENERAL PURPOSE PLASTIC RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes

DO-201AD

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

FEATURES

♦ Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

♦ High surge current capability
♦ Typical IRless than 0.1µA
♦ Construction utilizes void-free molded plastic technique
♦ 3.0 Ampere operation at TA=90°C

with no thermal runaway

♦ High temperature soldering guaranteed:

250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.4 ounce, 1.1 grams

SYMBOLS P300A P300B P300D P300G P300J P300K P300M UNITS

Maximum repetitive peak reverse voltage V
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current

0.375" (9.5mm) lead length at T

=55°C

A

RRM
RMS

I

(AV)

DC

50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts

Peak forward surge current

8.3ms single half sine-wave superimposed on I

FSM

rated load (JEDEC Method)
Maximum instantaneous forward voltage

at 3.0A
Maximum DC reverse current T

at rated DC blocking voltage T
Typical junction capacitance
Typical reverse recovery time
Typical thermal resistance

Operating junction and storage temperature range T

NOTES:

(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted

with 0.8” x 0.8” (20 x 20mm) copper heatsinks

(NOTE 1)

(NOTE 2)

(NOTE 3)

=25°C 5.0

A

=100°C

A

V

F

I

R

C

J

t

rr

R

ΘJA

R

ΘJL

, T

J

STG

3.0 Amps

200.0 Amps

1.2 Volts

25.0

µA

30.0 pF

2.0 µs

20.0

5.0

°C/W

-50 to +150 °C

4/98

20 50 100 150 180

0

1.0

2.0

3.0

110100

10

100

200

0.4 0.6 0.8 1.0 1.6 1.8

0.01

0.1

10

100

1.2 1.4

1

0.1 1 10 100

1

10

100

0.01 0.1 1 10 100

0.1

1

10

100

0204060

0.01

0.1

10

100

80 100

1

RATINGS AND CHARACTERISTIC CURVES P300A THRU P300M

FIG. 1 - FORWARD CURRENT DERATING CURVE

0.8 x 0.8 x 0.40”
(20 x 20 x 1mm)

AMPERES

60 H

Z

RESISTIVE OR

AVERAGE FORWARD RECTIFIED CURRENT,

INDUCTIVE LOAD

AMBIENT TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS

FORWARD CHARACTERISTICS

COPPER HEAT SINKS

TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE

L=0.375 (9.5mm)
LEAD LENGTH

FIG. 2 - MAXIMUM PEAK FORWARD SURGE CURRENT

NON-REPETITIVE

TJ=TJmax.

8.3ms SINGLE HALF
SINE-WAVE (JEDEC Method)

AMPERES

REPETITIVE

PEAK FORWARD CURRENT,

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

Z

TJ=150°C

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

JUNCTION CAPACITANCE, pF

VOLTS

TJ=25°C
f=1.0 MHz
Vsig=50mVp-p

TJ=100°C

MICROAMPERES

INSTANTANEOUS REVERSE CURRENT,

TJ=25°C

PERCENT OF RATED PEAK REVERSE

FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE

TRANSIENT THERMAL IMPEDANCE, °C/W

VOLTAGE, %

REVERSE VOLTAGE, VOLTS

t, PULSE DURATION, sec.