General Semiconductor MBR2560CT, MBR2550CT, MBR2535CT, MBR2545CT Datasheet
MBR2535CT THRU MBR2560CT
0.415 (10.54) MAX.
0.154 (3.91)
0.148 (3.74)
DIA.
0.113 (2.87)
0.103 (2.62)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.35)
0.110 (2.79)
0.100 (2.54)
PIN
1
2
3
PIN 1
PIN 3
CASE
1.148 (29.16)
1.118 (28.40)
0.105 (2.67)
0.095 (2.41)
0.410 (10.41)
0.390 (9.91)
0.105 (2.67)
0.095 (2.41)
0.635 (16.13)
0.625 (15.87)
0.560 (14.22)
0.530 (13.46)
PIN 2
0.370 (9.40)
0.360 (9.14)
SCHOTTKY RECTIFIER
Reverse Voltage - 35 to 60 Volts Forward Current - 30.0 Amperes
FEATURES
TO-220AB
Dimensions in inches and (millimeters)
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Metal silicon junction,
majority carrier conduction
♦ Low power loss,
high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage V
Maximum working peak reverse voltage V
Maximum DC blocking voltage V
Maximum average forward rectified current at T
Peak repetitive forward current per leg at T
(rated V
, square wave, 20 KHZ)
R
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Peak repetitive reverse surge current
(NOTE 1)
Maximum instantaneous forward voltage I
per leg at:
Maximum instantaneous reverse current at
rated DC blocking voltage per leg
Maximum thermal resistance
Voltage rate of change (rated V
(NOTE 2)
(NOTE 3)
) dv/dt 10,000 V/µs
R
IF=15.0A,TC=25°C - 0.65
I
I
(NOTE 2)
Operating junction temperature range T
Storage temperature range T
NOTES:
(1) 2.0µs pulse width, f=1.0 KH
(2) Pulse test: 300µs pulse width, 1% duty cycle
(3) Thermal resistance from junction to case per leg
4/98
Z
=130°C I
C
=130°C
C
=15.0A,TC=25°C - 0.75
F
= 30A, TC=25°C
F
= 30A, TC=125°C 0.73 -
F
TC=25°C I
T
=125°C 40.0 50.0
C
SYMBOLS MBR2535CT MBR2545CT MBR2550CT MBR2560CT UNITS
35 45 50 60 Volts
35 45 50 60 Volts
35 45 50 60 Volts
30.0 Amps
30.0 Amps
150.0 Amps
1.0 0.5 Amps
0.82 -
Volts
0.2 1.0 mA
1.5 °C/W
-65 to +150 °C
-65 to +175 °C
RWM
(AV)
I
FRM
I
FSM
I
RRM
V
R
RRM
DC
F
R
ΘJC
J
STG
110100
0
25
50
75
100
125
150
0.01 0.1 1 10 100
0.1
1
10
100
0 50 100 150
0
6
12
18
24
30
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0.01
0.1
1
10
50
0.1 1 10 100
100
1,000
5,000
020406080100
0.001
0.01
0.1
1
10
50
RATINGS AND CHARACTERISTIC CURVES MBR2535CT THRU MBR2560CT
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
FIG. 1 - FORWARD CURRENT DERATING CURVE
RESISTIVE OR INDUCTIVE LOAD
TC=130°C
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
AMPERES
AVERAGE FORWARD CURRENT,
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=150°C
AMPERES
CASE TEMPERATURE, °C
CHARACTERISTICS
TJ=25°C
MBR2535CT - MBR2545CT
MBR2550CT & MBR2560CT
AMPERES
PEAK FORWARD SURGE CURRENT,
NUMBER OF CYCLES AT 60 H
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
PER LEG
Z
TJ=125°C
MILLIAMPERES
TJ=75°C
INSTANTANEOUS FORWARD CURRENT,
INSTANTANEOUS FORWARD VOLTAGE,
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
VOLTS
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
JUNCTION CAPACITANCE, pF
MBR2535CT - MBR2545CT
MBR2550CT & MBR2560CT
REVERSE VOLTAGE, VOLTS
INSTANTANEOUS REVERSE CURRENT,
TJ=25°C
PERCENT OF RATED PEAK REVERSE
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
MBR2535CT - MBR2545CT
MBR2550CT & MBR2560CT
VOLTAGE, %
PER LEG
°C/W
TRANSIENT THERMAL IMPEDANCE,
t, PULSE DURATION, sec.
Loading...