General Semiconductor KBU6J, KBU6M, KBU6B, KBU6K, KBU6G Datasheet

...

KBU6A THRU KBU6M

0.160 (4.1)

0.065 (1.7)

0.185 (4.7)

0.895 (22.7)

0.935 (23.7)

0.140 (3.6)

0.165 (4.2)

0.085 (2.2)

0.240 (6.09)

0.200 (5.08)

0.220 (5.6)

0.180 (4.6)

0.075 (1.9) R. TYP. (2 PLACES)

0.205 (5.2)

0.185 (4.7)

0.052 (1.3)

0.048 (1.2)

0.280 (7.1)

0.260 (6.6)

DIA.

0.760 (19.3)

MAX.

0.700 (17.8)

0.660 (16.8)

1.0

(25.4)

MIN.

0.455 (11.3)

0.405 (10.3)

SINGLE-PHASE BRIDGE RECTIFIERS

Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes

FEATURES

Case Style KBU

Dimensions in inches

and

(millimeters)

♦ Plastic material used carries Underwriters Laboratory

Flammability Classification 94V-0

♦ This series is UL listed under Recognized Component Index,

file number E54214

♦ High case dielectric strength

of 1500 V

RMS

♦ Ideal for printed circuit boards ♦ High surge current capability ♦ High temperature soldering guaranteed:

250°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension

MECHANICAL DATA

Case: Molded plastic body Terminals: Plated leads solderable per MIL-STD-750,

Method 2026

Mounting Position: Any Mounting T orque: 5 in. - lb. max. Weight: 0.3 ounce, 8.0 grams

(NOTE 1)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 6A 6B 6D 6G 6J 6K 6M UNITS

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V

(NOTE 2)

=100°C

=40°C

(

NOTE 1, 2)

(NOTE 3)

=150°C

=25°C 5.0 µA

=125°C

Maximum average forward rectified T output current at T

Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method)T

Maximum instantaneous forward voltage drop per leg at 6.0A

Maximum DC reverse current T at rated DC blocking voltage per leg T

Typical thermal resistance per leg

Operating junction and storage temperature range T

NOTES:

(1) Recommended mounted position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw (2) Thermal resistance from junction to ambient with units in free air, P.C.B. mounted on 0.5 x 0.5” (12 x 12mm) copper pads, 0.375" (9.5mm) lead length (3) Thermal resistance from junction to case with units mounted on a 2.6 x 1.4 x 0.06" thick (6.5 x 3.5 x.15cm) Al. Plate

R R

, T

RRM RMS

(AV)

FSM

ΘJA ΘJC

STG

KBU KBU KBU KBU KBU KBU KBU

50 100 200 400 600 800 1000 Volts 35 7 0 140 280 420 56 0 700 Volts 50 100 200 400 600 800 1000 Volts

6.0

250.0 Amps

1.0 Volts

1.0 mA

8.6

3.1

-50 to +150 °C

Amps

°C/W

4/98

50 100 150

2.0

4.0

6.0

0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

0.1

100

1 10 100

100

400

10 100

100

125

150

175

200

225

250

020406080100

0.01

0.1

RATINGS AND CHARACTERISTICS CURVES KBU6A THRU KBU6M

FIG. 1 - DERATING CURVE OUTPUT RECTIFIED

HEAT-SINK MOUNTING, T

2.6 x 1.4 x 0.06”

AVERAGE FORWARD CURRENT,

(6.5 x 3.5 x 1.5cm) AL. PLATED

AMPERES

P.C.B. MOUNTING, T

0.375” (9.5mm) LEAD LENGTH WITH

0.5 x 0.5” (12 x 12mm) COPPER PAD AREAS

FIG. 3 - TYPICAL INSTANTANEOUS FORWARD

CURRENT

TEMPERATURE, °C

CHARACTERISTICS PER LEG

TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD

AMPERES

PEAK FORWARD SURGE CURRENT,

1.0 CYCLE

FIG. 4 - TYPICAL REVERSE LEAKAGE

SURGE CURRENT PER LEG

SINGLE SINE-WAVE (JEDEC Method) TJ=150°C

NUMBER OF CYCLES AT 60 Hz

CHARACTERISTICS

TJ=100°C

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE, VOLTS

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

PER LEG

TJ=25°C f=1.0 MHz Vsig=50mVp-p

MICROAMPERES

TJ=25°C

INSTANTANEOUS REVERSE CURRENT,

PERCENT OF RATED PEAK REVERSE

VOLTAGE, %

JUNCTION CAPACITANCE, pF

REVERSE VOLTAGE, VOLTS