General Semiconductor GP15M, GP15K, GP15J, GP15G, GP15D Datasheet

...

GP15A THRU GP15M

0.034 (0.86)

0.028 (0.71)

0.140 (3.6)

0.104 (2.6)

DIA.

1.0

MIN.

(25.4)

0.230 (5.8)

0.300 (7.6)

1.0

MIN.

(25.4)

GLASS PASSIVATED JUNCTION RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes

DO-204AC

PATENTED*

Dimensions in inches and (millimeters)

Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306

Glass-plastic encapsulation technique is covered by

FEATURES

♦ Plastic package has

Underwriters Laboratory Flammability Classification 94V-0

♦ High temperature metallurgically

bonded construction

♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of

MIL-S-19500

♦ 1.5 Ampere operation at TA=55°C with no thermal

runaway

♦ Typical IRless than 0.1µA ♦ High temperature soldering guaranteed:

350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 15A 15B 15D 15G 15J 15K 15M UNITS

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current

0.375" (9.5mm) lead length at T

=55°C

RRM RMS

(AV)

Peak forward surge current

8.3ms single half sine-wave superimposed

FSM

on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.5A V Maximum full load reverse current, full cycle average

0.375" (9.5mm) lead length atT Maximum reverse current T

at rated DC blocking voltage T Typical reverse recovery time Typical junction capacitance Typical thermal resistance

Operating junction and storage temperature range T

NOTES:

(1) Reverse recovery conditions:IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B.mounted

=55°C

(NOTE 1)

(NOTE 2)

(NOTE 3)

= 25°C 5.0

=150°C

R(AV)

I t

ΘJA

ΘJL

, T

4/98

GP GP GP GP GP GP GP

50 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts

STG

1.5 Amps

50.0 Amps

1.1 Volts

100.0 µA

200.0

µA

2.0 µs

15.0 pF

45.0

20.0

°C/W

-65 to +175 °C

110100

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

1.25

25 50 75 100 150 175

1.0

125

1.5

0.75

0.5

0.25

020406080100

0.01

0.1

0.01 0.1 1 10 100

0.1

100

RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M

FIG. 1 - FORWARD CURRENT DERATING CURVE

AMPERES

0.375"(9.5mm) LEAD LENGTH

AVERAGE FORWARD RECTIFIED CURRENT,

AMBIENT TEMPERATURE, °C

FIG. 3 - TYPICAL INSTANTANEOUS

FORWARD CHARACTERISTICS

TJ=150°C

60 H

RESISTIVE OR INDUCTIVE LOAD

PULSE WIDTH=300µs 1% DUTY CYCLE

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

TJ=TJmax.

8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)

AMPERES

PEAK FORWARD SURGE CURRENT,

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

TJ=125°C

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

TJ=25°C

VOLTS

TJ=25°C f=1.0 MH

Vsig=50mVp-p

TJ=75°C

MICROAMPERES

INSTANTANEOUS REVERSE CURRENT,

TJ=25°C

PERCENT OF RATED PEAK REVERSE

VOLTAGE, %

FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE

JUNCTION CAPACITANCE, pF

REVERSE VOLTA GE, VOLTS

TRANSIENT THERMAL IMPEDANCE (°C/W)

t, PULSE DURATION, sec