General Semiconductor FEP6DT, FEP6CT, FEP6AT, FEP6BT Datasheet

FEP6A T THRU FEP6DT

0.415 (10.54) MAX.

0.154 (3.91)

0.148 (3.74)

DIA.

0.113 (2.87)

0.103 (2.62)

0.185 (4.70)

0.175 (4.44)

0.055 (1.39)

0.045 (1.14)

0.145 (3.68)

0.135 (3.43)

0.350 (8.89)

0.330 (8.38)

0.160 (4.06)

0.140 (3.56)

0.037 (0.94)

0.027 (0.68)

0.205 (5.20)

0.195 (4.95)

0.560 (14.22)

0.530 (13.46)

0.022 (0.56)

0.014 (0.35)

0.110 (2.79)

0.100 (2.54)

PIN 1

PIN 3

CASE

1.148 (29.16)

1.118 (28.40)

0.105 (2.67)

0.095 (2.41)

0.410 (10.41)

0.390 (9.91)

0.105 (2.67)

0.095 (2.41)

0.635 (16.13)

0.625 (15.87)

0.560 (14.22)

0.530 (13.46)

PIN 2

0.370 (9.40)

0.360 (9.14)

FAST EFFICIENT PLASTIC RECTIFIER

Reverse Volta ge - 50 to 200 Volts Forward Current - 6.0 Amperes

TO-220AB

Dimensions are in inches and (millimeters)

FEATURES

♦ Plastic package has Underwriters Laborator y

Flammability Classification 94V-0

♦ Dual rectifier construction, positive center-tap ♦ Glass passivated chip junctions ♦ Superfast recovery times for high efficiency ♦ Low power loss ♦ Low forward voltage, high current capability ♦ For use in low voltage, high frequency inverters,

free wheeling and polarity protection applications

♦ High temperature soldering guaranteed:

250°C, 0.16" (4.06mm) from case for 10 seconds

MECHANICAL DATA

Case: JEDEC TO-220AB molded plastic body over

passivated chips Terminals: Plated lead solderable per MIL-STD-750, Method 2026

Polarity: As marked Mounting Position: Any Mounting T orque: 5 in. - lb. max. Weight: 0.08 ounce, 2.24 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

Maximum repetitive peak reverse voltage V Maximum RMS voltage V Maximum DC blocking voltage V Maximum average forward rectified current at T Peak forward surge current

8.3ms single half sine-wave superimposed on rated load (JEDEC Method)

Maximum instantaneous forward voltage per leg at 3.0A

Maximum DC reverse current T at rated DC blocking voltage T

Maximum reverse recovery time per leg Typical ther mal resistance

Typical junction capacitance per leg Operating junction and storage temperature range T

NOTES:

(1) Reverse recovery test conditions:IF=0.5A, Ir=1.0A, Irr=0.25A (2) Thermal resistance from junction to ambient in free air, no heatsink (3) Thermal resistance from junction to case per leg mounted on heatsink (4) Measured at 1.0 MH

4/98

(NOTE 2) (NOTE 3)

and applied reverse voltage of 4.0 Volts

C C

(NOTE 1)

(NOTE 4)

=100° I

=25°C 5.0 =100°C

SYMBOLS FEP6AT FEP6BT FEP6CT FEP6DT UNITS

RRM

RMS

(AV)

FSM

ΘJA

ΘJC

J, TSTG

50 100 150 200 Volts 35 70 105 140 Volts

50 100 150 200 Volts

6.0 Amps

100.0 Amps

0.975 Volts

50.0

µA

35.0 ns

20.0

3.6

°C/W

28.0 pF

-55 to +150 °C

0 50 100 150

2.0

4.0

6.0

8.0

1 10 100

100

125

150

0.1 1 10

0.40.60.81.01.21.41.61.8

0.1

100

020406080100

0.01

0.1

100

RATINGS AND CHARACTERISTIC CURVES FEP6AT THRU FEP6DT

FIG. 1 - FORWARD CURRENT DERATING CURVE

RESISTIVE OR INDUCTIVE LOAD

AMPERES

AVERAGE FORWARD CURRENT,

FIG. 3 - TYPICAL INSTANTANEOUS FORWARD

CASE TEMPERATURE, °C

CHARACTERISTICS PER LEG

TJ=125°C

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT

TC=100°C

8.3ms SINGLE HALF SINE WAVE (JEDEC Method)

AMPERES

PEAK FORWARD SURGE CURRENT,

NUMBER OF CYCLES AT 60 H

FIG. 4 - TYPICAL REVERSE CHARACTERISTICS

PER LEG

AMPERES

INSTANTANEOUS FORWARD CURRENT,

INSTANTANEOUS FORWARD VOLTAGE,

FIG. 5 - TYPICAL JUNCTION

CAPACITANCE PER LEG

TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE

VOLTS

TJ=25°C f=1.0 MH Vsig=50mVp-p

TJ=125°C

TJ=100°C

MICROAMPERES

INSTANTANEOUS REVERSE LEAKAGE CURRENT,

TJ=25°C

PERCENT OF RATED PEAK REVERSE

VOLTAGE, %

JUNCTION CAPACITANCE, pF

REVERSE VOLTAGE, VOLTS