General mobile DST DIAMOND User Manual
Contents
1. For your Safety…………………………4
2. Mobile Phone Profile……………….7
3. Preparation before Use……………9
Install SIM Card ........................................ 9
Install Memory card ............................... 11
Install Battery ......................................... 12
Charge Battery ....................................... 12
Notices on using the battery ................... 14
PIN code ................................................. 15
4. General Instructions………………..16
Dial key ................................................... 16
Switch-on/off key /End key ..................... 17
Standard keypad .................................... 17
AM/FM function key ............................... 18
Keypad lock ............................................ 18
Icons in Standby State ............................ 19
Language and Input Mode ..................... 19
Services ................................................... 20
Callers’ group ......................................... 20
5. Terms Description……………………….21
1
Dial domestic calls .................................. 21
Dial international calls ............................ 21
Dial extension ......................................... 22
Emergency calls ...................................... 23
IMEI ........................................................ 23
IP dial...................................................... 23
6. Basic operation………………………..24
Switch on ................................................ 24
Switch off................................................ 25
Dial a Call ............................................... 25
Adjust Receiver Volume .......................... 26
Answer a Call .......................................... 26
Send DTMF Signal ................................... 27
Dial Hold ................................................. 27
Fast Read SMS ........................................ 28
Missed Calls ............................................ 28
Connect to Voice mail ............................. 28
7. Use of Menu Functions……………….29
7.1 Multimedia…………………………………….29
7.2 Phonebook………………………………….….41
7.3 Call History……………………………………..44
7.4 Services…………………………………………..47
7.5 Chatting………………………………………….49
7.6 Messaging……………………………………..51
2
7.7 Sociality………………………………………….59
7.8 Organizer……………………………………….60
7.9 Sense me………………………………………..64
7.10 Twitter………………………………………….67
7.11 Settings………………………………………..67
8. Editor Operation………………………80
Basic letter input .................................... 81
Number input ......................................... 81
Symbol input........................................... 81
9. Use of USB………………………………82
10. Maintenance & Safety……………..82
After sales service ................................... 83
Charger and Adapter Safety ................... 83
Battery Information and Care ................. 83
General Notice ........................................ 84
Troubleshooting ..................................... 85
11. Abbreviations & Definitio…………89
3
1. For your Safety
For your safety and proper use of the
mobile phone, please read the following
guidelines carefully: Do not switch the mobile
phone on when close to chemical factory, gas
station or other explosive objects.
During driving, please use headset for safety
purpose; unless otherwise in emergency,
always stop the car on roadside to have a call
conversation.
Because the use of the mobile phone can
cause interference in the aircraft, never use
the mobile phone in aircraft. The use of the
mobile phone is dangerous and illegal; do
switch off the mobile phone before boarding.
Pay special attention to the use of the mobile
phone near heart pacemaker, deaf-aid and
some other medical equipments, because
the mobile phone can cause interference
with them.
None-original factory’s accessories and parts
will lose guarantee.
Do not dismantle the mobile phone without
permission. In case of failure, please contract
4
the supplier as soon as possible.
Do not plug the charger into the mobile
phone and charge without battery. Always
power off the mobile phone when taking out
the battery; otherwise the memory of the
phone may be damaged.
When charging the mobile phone, always
keep it in the place with good ventilation,
heat sink and away from flammable and
explosive objects.
In order to avoid demagnetization, always
keep the mobile phone away from magnetic
objects such as CD, credit card etc.
Ensure the mobile phone not to contact any
liquid; once such case occurs, remove the
battery and contact the supplier
immediately.
Do not use the mobile phone in the
environment at too high or too low
temperature, never expose the mobile
phone under strong sunshine or too wet
environment. The suitable temperature for
the phone and accessories is 0℃-40℃. The
height to use the phone shall be less than
2,000m.
Do not use liquid or wet cloth with strong
5
cleanser to clean the mobile phone.
This mobile phone has shooting, videoing
and audio recording functions, which shall be
used as per the related laws and regulations.
Always keep the mobile phone out of
children’s reach. Do not throw or vibrate the
mobile phone because violent treatment to
the mobile phone may damage the inner
circuits and precise structures.
Please do not discard the waste battery into
general household garbage. Please deal with
the waste battery according to provisions
where they are definitely made.
Tip: This user manual is based on simplified
Chinese operation mode; so it may vary in English
operation mode.
Warning: We will not be bear any responsibility
for any incompliance with the above guidelines
or improper use of the mobile phone. Our
company keeps the right to make modifications
to any of the content here in this user guide
without public announcement in advance. The
content of this manual may vary from the actual
content displayed in the mobile phone. In such
case, the latter shall govern.
6
1
2
3
4
7
9
10
5
6
8
2. Mobile Phone Profile
The mobile phone has 50 keys, including single
screen， one vibration motor, one charger/ data
common transmission port. (Below is the front
of the mobile phone).
7
1.
Speaker
7.
QWERTY keypad
2.
LCD 8.
Phonebook
3.
Main menu keys
9.
Retreat key
4.
Message Shortcuts
10.
End key
5.
SEND 1 key(SIM-1)
11.
Speaker
6.
SEND 2 key(SIM-2)
12.
Camera
11
12
8
3. Preparation before Use
Install SIM Card
When registering mobile phone number,
you can apply for two different phone numbers,
two different mobile phone network service
providers and thus obtain two SIM (Subscriber
Identification Module) cards.
With these two SIM cards, you can use all
functions of your mobile phone. The SIM cards
save the parameters needed for communications
and personal data, including PIN (Personal
Identification Number) code, phonebook, short
message and other extra system services.
Warning: Do not distort or scratch the SIM card
nor let it contact static, dust or moisture. If it is
lost, please contact immediately your network
operator for help.
Before SIM card installation, please switch off
the mobile phone. The SIM card is installed on
the back of the mobile phone.
Follow the following diagram to install the
SIM card. Please insert the host SIM card into the
SIM1 slot and the slave SIM card into the SIM2
9
slot.
SIM 1
SIM 2
Note: If SIM card is inserted only into the
SIM1 slot, then only the host works; likely, If SIM
card is inserted only into the SIM2 slot, then only
the slave works. When two SIM cards are
inserted into the SIM1 slot and SIM2 slot
respectively, you can choose work mode freely as
you wish.
Note: As the SIM card is small object, keep it out
of children’s touch or prevent children gulping it!
10
Memory Card
Install Memory card
As the mobile phone does not have enough
storage space, to use some functions, you need
to install a memory card (This mobile phone use
T-FLASH card.)
Install T-FLASH card: Open the back cover to
take out the battery, release the T-Flash card lock,
insert the T-Flash card into its slot, and restore
the lock and the battery before restarting the
mobile phone.
Note: As the T-FLASH card is small object, keep it
out of children’s touch or prevent children
gulping it!
11
Battery
Battery
Install Battery
The mobile phone is suitable for original
battery and accessories. When the battery is idle,
it is recommended to put it into the protection
box.
Follow the following diagram to install the
battery.
Note: Do install the battery as per the diagram so
as prevent the battery contact patch being
damaged.
Charge Battery
The new battery cannot reach the optimal
efficiency unless it has undergone several
12
Earphone
continuous complete charges and discharges.
Charger Port /USB
time. Over-discharge can damage the battery.
connection of charger with the AC power supply
and the connection with the mobile phone.
charger.
on the screen flickers from the right to the left.
After the battery is charged full, the icon is full of
bars. Slight heat during charging is normal.
Warning: When a travel charger and its
accessories are used to charge the battery, please
firstly check if they are original or recognized by
the original manufacturer. The use of other
accessories may damage your mobile phone and
cause risks! Always use them indoor and dry
places.
When the battery is used up, charge it in
After the battery is charged full, cut off the
Follow the following diagram to connect the
During charging, the battery capacity icon
13
Notices on using the battery
The performance of the battery is affected
by many factors, including radio barrier network
settings, signal strength, signal strength, work
temperature, chosen and used functions or
settings as well as phone accessories, tone, data
or other applications.
For optimal performances, please follow the
rules below:
New battery or the battery having been idle
for long need charging for long. The standard
voltage scope for the battery is 3.6V-4.2V.
During charging, keep the battery at room
temperature or similar temperature.
With time passing by, the battery will
gradually be worn and thus need longer time
to charge. This is normal. However, after
normal charging, if call duration decreases
but charging time increases, you need to buy
another battery from the original
manufacturer or authorized by the original
manufacturer. The battery of interior quality
can damage your mobile phone and cause
danger!
If the phone is overused at low battery when
14
charging, there might need a longer time for
Warning
Charging the mobile phone by
improper means can cause to explosion.
Always refer to the related regulations for
the disposal of the battery.
the charge indicator to be shown on the
screen.
Note: Please dispose the battery according to the
local regulations. Try to recycle the battery as
possible. Do not treat the waste battery as
common waste.
Warning: Do not throw the battery into fire so as
to prevent fire. The broken battery may cause
explosion.
PIN code
PIN1 Code: It is the personal identification
number used to enter SIM and able to prevent
others using SIM1 without permission. If the
mobile phone has activated the PIN1 code
protection, when the mobile phone is switched
on, the screen will display “Input PIN”. In the
process of inputting PIN1 code, the screen will
use “*” to represent the input content. While
15
obtaining SIM, you can obtain its PIN1 code.
PIN2 Code: It is the personal identification
number used for some special functions such as
paid call etc.
PUK Code and PUK2 Code(8-digit)
To change the locked PIN code, you need to
use PUK (Personal Unblocking Key) code. To
change the locked PIN2 code, you need to use
PUK2 code. If these two codes are not provided
together with the SIM cards, ask the local service
provider for them.
Warning: If the PIN code is input wrongly for
successively three times, the SIM card will be
locked. Please contact the network operator
immediately for help. Attempt to unlock the code
may make the SIM card ineffective forever!
4. General Instructions
Dial key
It is used to dial a call (with phone number
entered or in phonebook state) or receive an
incoming call. In standby state, press this key to
16
display the latest call register (SIM1 and SIM2
support respectively 20 call entries, including
received calls, missed calls and dialed calls). In
dual-SIM standby mode, press this key to have an
option menu on which you can choose to operate
via SIM1 or via SIM2.
Switch-on/off key /End key
In call state, it is used to interrupt a call; in
call conversation state, it is used to end a call or
exit from the current menu and back to the
standby state. Hold this key for 4~5s to switch
on/off the mobile phone.
Standard keypad
On the keypad, you can see A-Z （ 0-9
number keys ）number keys, * key and # key,
totally 42 keys.
Press these keys to input phone number,
password, English letters, symbols or choose
menus.
In different states or different functional
menus, “+” key and “-“ key have different
functions:
Press “SPEAKER” key long to start or exit
from the silence mode.
In music player state, “+” and “-” are used
17
to adjust volume.
Tip: The difference between “W” and “P” is that
“P” will directly send DTMF after 3s pause while
“W” will eject a window asking whether the user
to send DTMF.
AM/FM function key
OK key: In radio state, press the key to stop
In search state, press the left/right key to
search channels forward and backward,
press the OK key until you find an effective
channel. For FM, you can have a tuning of
0.1MHz downward or backward.
1-9 number keys: If they are pressed shortly,
you can switch to the corresponding
channels saved in the channel list; if they are
pressed long, you can save the current
frequency to the corresponding channel.
+, - key: Adjust volume.
Keypad lock
When in standby interface, if the mobile
phone is idle for certain time, it will be locked
automatically. Press the Unlock key and “*”to
release. After the mobile phone is locked, the
keypad cannot be activated easily; in case of
18
incoming call, likewise, press the answer key to
Indicates s ignal
strength
Indicate the
battery level
Alarm clock is
active
Keypad is locked
There is new
message(s)
Host line 1
There is missed
call(s)
Host line 2
In normal mode
Slave line 1
Vibrate then ring
Slave line 2
Ring
MMS Vibrate
Inbox PUSH
Ring and vibrate
GPRS
Call divert
receive it; after that, the keypad will be locked
automatically.
Icons in Standby State
Language and Input Mode
mode. For different areas, there are different
languages and corresponding input modes.
Call hint
The mobile phone has defaulted abc input
19
The mobile phone is inbuilt with vibration
motor and buzzer and provides several incoming
call modes:
Ring
Vibration
Ring and vibration
Ring after vibration
Services
Services are provided with SIM kit. The
mobile phone support service function. The
detailed menu items depend on SIM card and the
network. When the network provides such
function and your SIM card supports such
function, the service menu will automatically be
posted in the services of the mobile phone.
Callers’ group
The callers’ group in the mobile phone
includes friends, family, VIP, colleagues and
others etc. You can set different call tone and
photo for different callers’ group.
20
5. Terms Description
Dial domestic calls
The simplest method to dial a domestic call is
to input phone number via the number
keypad, then press dial key to dial call. To
change phone number, press “del key”.
During dialing, the screen will display a
cartoon. If SIM card 1 call, "SIM1-" occurs; if
SIM card 2 call, "SIM2-" occurs. When the
other party is connected, the screen will
display the corresponding information.
Press end key to end the call.
To dial a domestic call, input area code +
phone number and then press the dial key.
Dial international calls
If you want to make an international call, you
can press * key continuously until the
international dialing prefix “+” is seen on the
screen. This will allow you make an
international call from any country without
knowing the dialing prefix (for example, +62
represents Indonesia).
21
After inputting the prefix, you need to input
the Country number and complete
telephone number. You can input the
Country number according to the common
practice, such as, 49 for Germany, 44 for
British, 46 for Sweden, etc.
Dial international telephone number as
following: “+” Country number +Complete
telephone number + Dial key.
Dial extension
Some fixed-line telephone extension may not
directly get through, so you need to connect
to the switchboard at first then put through
extension number. The mobile phone can
automatically dial extension number if you
input “P” between the switchboard and
extension number. Method for input “P” as
following: hold press or continually short
press three times “*” key (“P” will be shown
on the display).
Dial fixed-line telephone extension as
following: phone number + “P” + extension
number + dialing key.
22
Emergency calls
If your phone is under the network coverage
(you can know this by checking the signal bar at
the up left corner on the screen), you can make
emergency calls. If your network supplier does
not provide roaming service in this area,
Emergency will be shown on the screen. That
means you can only make this kind of calls. If
your phone is under the network coverage, you
can even make emergency calls without the SIM
card.
* In some areas, 112 (emergency call) service is
provided by the network operator. In case of
failure, consult the network operator.
IMEI
International Mobile Equipment Identity
number. Switch off the mobile phone and take off
the battery, then you will see the label with such
number on the back of the mobile phone. Also,
this number is saved in the mobile phone. After
switch-on, in standby state, input “*#06#” to
display it.
IP dial
Firstly, in Settings/Call Settings, set correct
IP access number. Enter the phonebook and
23
choose IP Dial.
Note: Regarding whether to activate IP dial when
dialing local call, please consult the network
operator.
6. Basic operation
Switch on
Press the switch-on/off key to start the
mobile phone, then the screen will display
switch-on image. Then you can enter Settings
menu to set phone modes, including SIM1 &
SIM2 On, Only SIM1 On, Only SIM2 On and Flight.
The defaulted one is Only SIM1 On.
After insert SIM card, the mobile phone will
automatically check the SIM card availability, and
then it will be shown information as following on
the display by sequence:
1. “Input phone password”——If you have set
the password.
2. “Input PIN” —— If you set SIM card
password.
3. “No service”—Indicates fail to make register
and cannot make any calls.
24
4. “Emergency calls only”—indicates has
registered to other network and only can
make call to 112.
5. “Searching”—the mobile phone is searching
network until find appropriate network;
6. “Operator name”—Indicates network
successfully registered.
Note: If you do not know PIN code, please
contact the network service provider.
The defaulted phone password “1122”.
Switch off
To switch off the mobile phone, press the
end key. When the screen displays switch-off
cartoon, the host and the slave will be off at the
same time. Do not take out the battery to switch
off the mobile phone. If so, the SIM card can be
damaged easily and some data will be lost.
Dial a Call
With the number keypad, you can enter
phone numbers (if wrong characters are
input, press the clear key to delete them).
Press the dial key to dial the phone number.
In SIM1 and SIM2 On state, you can choose
to dial a call via SIM1 or SIM2. To end a call,
press the end key; or to cancel a dial, press
25
the Cancel key or the switch-on/off key. After
the call is connected, you can see the call
timer on the screen.
Dial a call via phonebook: Enter the
phonebook and search the desired
name/phone number, and then press dial
key to dial call.
Redial latest dialed number: In standby state,
press dial key to view the list of the latest
dialed 20 phone number or names. Roll to
the desired phone number or name and
press dial key to dial call.
Adjust Receiver Volume
In call conversation, press the “+”and “-” to
adjust the volume of the receiver.
Answer a Call
When there is a call, as per the settings of
the mobile phone, you will be alerted with ring,
vibration, vibration and ring as well as ring after
vibration.
To receive a call, press Dial/Call Key.
To refuse a call, press Switch-on/off key or
the end key directly.
If the CLI (Call Line Identity) is opened, the
26
phone number of the caller will occur on the
screen. If this number has been saved in the
phonebook, the name corresponding to this
number will be displayed on the screen.
Send DTMF Signal
When this function is set, in call
conversation, press the desired number key and *
key and # key to send DTMF signals to the other
party. If such function is inactive, then extension
call will become impossible.
Dial Hold
If you have applied for dial hold, in the call
conversation process, press “Options” to have the
following function menus:
Pause: Pause the current call but with the
line keeping connected.
End: End the current call conversation.
New Call: Enter the dial interface, dial
another call.
Phonebook: Enter the directory of the
phonebook.
SMS: Enter the directory of theSMS.
Record: While having call conversation, you
can record the call.
Activate/Inactivate Handfree: You can
27
Loading...