General Infinity BHC1100 User Manual

BHC1100 QIG

Bluetooth™ Stereo Headset BHC1100 is a headset that
supports wireless music streaming. By connecting the
headset to the PC via a Bluetooth USB audio dongle,
the user can listen to music in streaming mode. Also, the
user can listen to music by connecting the headset to the
MP3 via a Bluetooth audio adapter. The sports design of
the headset with its light headband allow user to enjoy
sheer and unsurpassed comfort. It is perfect for
travel entertainment or as an add-on for your home entertainment system. People can switch to
mobile phone automatic or manually when there is an incoming call headset connect with your
cellular phone(with Bluetooth™ function) give you a safety way to none stop communication in
driving.

1 Headset Features

1
2
3

5

4

6

7

1: Volume up 2: Play/Pause
3: Volume down 4: Power button (MFB) and LED
5: Forward button 6: Backward button
7: Microphone

v1.0

2 Charge your headset

After opening the package, please make sure to do the following steps full charge the headset by
charge it at least 4 hours. The Red LED will be steady on when charging. The LED will go off when
battery is fully charged.

3 Power on or off your headset

Press MFB key about 3 seconds to power on the headset. When the headset power on the blue led
will flash 3 times and you can hear a rising tone. When headset already power on, press MFB key
about 3~5 seconds will power off the headset. When the headset power off the red led will flash 3
times and you can hear a falling tone.

4 Pairing device with your headset

Pairing headset to your Bluetooth™ mobile phone or other Bluetooth™ devices for the first time
only. The headset will remember paired device, so you don’t need pair it every time. To put headset
into pairing mode, press and hold the MFB button for six seconds to wait for the Blue and red led
flash alternative that indicates the headset is into the paring mode. Operate your Bluetooth™ mobile
phone or other Bluetooth™ device to start Bluetooth™ function. Find the headset “Stereo Headset” ,
press the pairing code “0000” The blue LED is start flashing, the headset is in connected mode

5 Working in AV mode

When your headset connect a device with A2DP profile, you can listen to stereo music from
transmitter side to your headset. You can connect a USB dongle or AV transmitter or cellular phone
with A2DP profile supported. Almost A2DP source device support AVRCP that can use paly/pause,
next track and pre track function.If you use AV transmitter with 3.5mm audio jack then it doesn’t
support AVRCP function. Working in AV connection mode, you can

l Short press Play/Pause key to toggle play/pause action
l Short press Vol+ or Vol- to adjust volume
l Short press forward or backward button to change songs

6 Working in headset mode

When your headset connect a device like cellular phone or a Bluetooth USB dongle working with
Bluetooth PC stack. Your headset can working in headset mode. Working in headset mode, your

v1.0