General Hydroponics WaterFarm 8-pack User Manual

WaterFarm

8-Pack

Assembly Guide

™

WATERFARM 8-PACK PARTS ASSEMBLY

1

6

7

5

8 9 10 12

2 3 4

11

WATERFARM 8-PACK PARTS:

1) Controller and Lid

2) Reservoir and Lid

3) Growing Chambers (8)

4) Individual Reservoirs (8)

5) Drip Rings (8)

6) Pumping Column Support Tubes (8)

7) Pumping Columns (8)

8) Air Lines (9)

9) Float Valve

10) Drain Level Tube

11) Parts Bag
½” Barbed, Elbow Fittings (4)
½” Barbed, Straight Fittings (15)
Drain Level Tube (DLT) Clip (1)

12) Circulating Pumping Column

13) Single Outlet Air Pump

14) Dual Diaphragm Air Pump

15) ½” Blue tubing (2x9’)

16) Flora Series Nutrients

STEP 1

Disassemble the Float Valve
and insert the threaded end
with the washer from the inside
of the Controller, through the
predrilled hole.

Pipe Thread Compound

16

15

14

13

Secure the Float Valve from the outside of the
Controller with the brass nut. Coat the remaining
threads with the Pipe Thread Compound and
screw on the brass 1/2” barbed hose fitting.