General Hydroponics EuroGrower User Manual

EuroGrower
Assembly Guide
®
EUROGROWER PARTS
1 247 815
BOX 1: BOX 2:
6 14 1311 10 3 9512 16 17
EUROGOWER PARTS:
BOX 1:
1) Bato Buckets (8)
2) Drain Elbows (8)
4) Reservoir Lid (1)
5) Reservoir Lid Support (1)
6) Mag Drive #2 (1)
7) Drain Valve (1)
8) Flora Series Nutrients (3 Pints)
9) pH Test Kit
10) Grasslin Timer
11) Drip Feed Line
12) Drain Rails (2)
13) Drip Stakes (8)
14) PumpLine (1)
15) Drain Rail Clips (6)
BOX 2: (not included with module)
16) CocoTek Fine Coir Bricks (4)
17) Clay Pebbles (50lbs)
STEP 1
Place the Panda Reservoir on a level surface where it will be used. Coat the inside of the Reservoir grommet with a thin coating of silicon grease (optional) and insert Drain Valve into grommet using a twisting motion.
STEP 2
Attach the Drain Rail Clips by inserting them into the holes on the Reservoir Lid.
STEP 3
Place the Lid Support in the center of Panda Reservoir with the notch over the center rib and place the Reservoir Lid on top of Panda Reservoir. Proper positioning of Lid Support will prevent the Reservoir Lid from sagging.
ASSEMBLY
STEP 4
Position both Drain Rails on top of the Reservoir Lid and make sure Drain Rails rest in the Drain Rail Holes in the Reservoir Lid.
Drain Rail Holes
Loading...
+ 5 hidden pages