PTWN6050M
GE Profile™ 4.3 IEC cu. ft. stainless steel capacity washer
Dimensions and Installation Information (in inches)
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
36
27
51
42
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Side View
Rear View
Specification Revised 1/11
Listed by
Underwriters
Laboratories
260191
PTWN6050M
GE Profile™ 4.3 IEC cu. ft. stainless steel capacity washer
Features and Benefits
• ENERGY STAR® qualified and CEE Tier II rated - Meets or exceeds federal
guidelines for energy efficiency for year-round energy and money savings
• HydroWave wash system with HE LoWater wash and Infusor™ - Utilizes the
concentrated power of HE detergent, requiring less water than a traditional
topload washer to get clothes clean
• PreciseFill - Washer will automatically measure the load size and add just the
right amount of water
• 700 RPM spin speed - Fast speeds remove more water during the spin cycle
to minimize drying time
• GE Profile warranty - Offers a lifetime warranty on the stainless tub and a
limited ten-year parts warranty, providing peace of mind and dependability
See written warranty for details
• Cycle countdown display with LED indicators - Know exactly how much time
is left for each cycle with bright display and lights
• Handwash Cycle - Provides effective yet gentle cleaning action
for delicate fabrics
• 6 wash/rinse temperatures - Multiple settings offer a greater degree of control
over fabric cleaning and care
• Model PTWN6050MWT – White
Modified Energy Factor (MEF)
Water Factor (WF)
Specification Revised 1/11
2.20
4.50
260191