General Electric PP945BMBB User Manual
3-1/4*
Cooktop
2-1/2**
Required
28-1/2
19-5/8
29-3/4
21-3/8
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
1-1/2" MIN.
clearance to
side wall
from cut-out
1-1/2" MIN.
clearance to
side wall
from cut-out
1-3/4" to
rear wall
13" MAX.
depth
* Depth of unit at conduit connection location (rear) is
6-1/4" on models PP980/975/950/945 and 4-5/8"
on models PHP960/900, PP972/962/942/932/912
and JP6SS/356/346/340.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
PP945WM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
†
KW Rating
240V
208V
7.8
5.9
Breaker Size
240V
208V
Note: 30” Ribbon cooktops are approved for use over select GE 30” Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed
with product before installing.
re-routed to install downdraft.
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
40 Amps
30 Amps
Note: Check local codes for required breaker size
Important: Requires a 5” free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
†
15” minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
†
a 48” flexible armored cable.
Cooktop gas/electric supply may need to be
The countertop must be at least 26" deep with
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Revised 4/09
Listed by
Underwriters
Laboratories
220593
WA
RMER
SIZE SELECT
SIZE SELECT
TIMER
SENSORS
C
O
N
T
R
O
L
L
O
C
K
P
A
N
HR
M
IN
PP945WM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Electronic Touch Controls - Offer easy, point-and-cook convenience
• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• 12"/9"/6" Tri-Ring Element - Accomodates various-sized pots or pans
for the ulitmate in cooking versatility
™
• PowerBoil
the boiling process
• Control Lock Capability - Provides the ability to lock controls, helping
protect from unintentional activation
• Hot Surface Indicator Lights - Illuminate when the cooking surface
is active and hot, adding convenience and safe caution
• Heating Element "On" Light - Illuminates when the cooking surface
is activated
• Model PP945WMWW - White on white
Element - Provides up to 3,000 watts of power to speed
• Model PP945BMBB - Black on black
Specification Revised 4/09
220593
Loading...