General Electric PP912BMBB User Manual
PP912TM/KM/BM
3-1/4*
Cooktop
2-1/2**
Required
28-1/2
19-5/8
29-3/4
21-3/8
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
1-1/2" MIN.
clearance to
side wall
from cut-out
1-1/2" MIN.
clearance to
side wall
from cut-out
1-3/4" to
rear wall
13" MAX.
depth
* Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/975/950/945 and 4-5/8"
on models PHP900/PP972/962/942/932/912,
JP655/356/346.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
†
KW Rating
240V
208V
7.6
5.7
Breaker Size
240V
208V
40 Amps
30 Amps
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing.
to install downdraft.
flush mount installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C (True
Bisque)
Note: Check local codes for required breaker size
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
†
adjacent overhead cabinets. Units are furnished with a
†
48" flexible armored cable.
Cooktop gas/electric supply may need to be re-routed
Consult cabinet and countertop manufacturer’s specs for
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Revised 12/07
Listed by
Underwriters
Laboratories
220581
PP912TM/KM/BM
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Ceramic Glass Cooktop - A smooth cooktop surface makes cleaning
quick and easy
• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• Dual Size Ribbon Element - Offers a convenient choice of using a
9" or 12" heating element, depending on the size of the pan
™
• PowerBoil
the boiling process
• Frameless Design - A smooth and seamless cooktop surface makes
cleaning quick and easy
• Dishwasher-Safe Knobs - Feature a robust construction for safe and
easy cleaning
• Control Lock Capability - Provides the ability to lock controls, helping
protect from unintentional activation
• Melt Setting - Optimized for melting chocolate, this setting delivers
the low gentle heat needed
• Model PP912TMWW - True white
• Model PP912KMCC - True bisque
• Model PP912BMBB - Black on black
Element - Provides up to 3,000 watts of power to speed
Specification Revised 12/07
220581
Loading...