Page 1
CHP9530SJ
chp9530sJ
GE Café
DImensIons anD InstallatIon InformatIon (In Inches)
™
Series 30" Built-In Touch Control Induction Cooktop
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires
a 15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with a
48" flexible armored cable.
note: 30" induction cooktops are approved for
use over select GE 27" and GE 30" Single Wall
Ovens and Warming Drawers. Refer to cooktop
and wall oven/warming drawer installation
instructions packed with product for current
dimensional data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop
and downdraft installation instructions packed
with product before installing.
Cooktop gas/
electric supply may need to be re-routed to install
downdraft.
The countertop cutout requires
23-1/2" minimum flat countertop surface and 25"
minimum total countertop depth. In addition,
other clearances to front edge of the countertop
must be considered. Before installing, consult
installation instructions packed with product for
current dimensional data.
approxImate cookIng DImensIons
4-5/8" at baffle near center of
unit (except when installed
above an approved wall oven)
and
3-1/4" at rear of air intake
1-3/4" MIN.
to rear wall
2-1/2" MIN.
Required
To insure accuracy, it is best to make a
template when cutting the opening in the counter
KW Rating
240V 7.3
208V 6.4
Amperage
240V 30.8 Amps
208V 30.8 Amps
29-3/4"
Cooktop
19-1/4"
28-1/2" to
28-5/8"
†
†Note: Check local codes for required
†
21-3/8"
28"
breaker size
19-5/8"
to 19-3/4"
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
Electrical junction box 16" MIN.
below countertop
2" MIN. clearance
to side wall from cut-out
on both sides of cooktop
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
For answers to your Monogram® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 1/15
Page 2
chp9530sJ
GE Café™ Series 30" Built-In Touch Control Induction Cooktop
features anD BenefIts
Four Induction elements - Enjoy a new level of rapid, precise heating
with a cool-to-the-touch surface that’s easy to clean
Glide touch controls - Precisely control heat instantly and easily
with one swipe
11" 3,700-watt induction element - Rapidly boil water with GE's most
powerful induction element
SyncBurners - Control two 7" elements simultaneously to evenly heat large
cookware or griddles
Stainless Steel Clad Aluminum Griddle - Achieve even results with this
lightweight griddle, tailored to fit GE SyncBurners
Multi-element timer - Manage up to four pans at once with individual
timers for each element
Control lock capability - Protects against unintended activation
Custom Settings - Personalize your cooktop settings to fit your
cooking style
Pan presence & size sensor - Cook efficiently with elements that heat
to the size of your pan and shut off when no pan is present
Blue LED display with beveled grey glass surface - Enjoy a premium
look that blends in with modern kitchen finishes
Model CHP9530SJSS - Stainless steel
optIonal precIsIon cookIng kIt
Achieve restaurant quality results with a probe that wirelessly
controls the temperature of your food. Ideal for Sous Vide,
Slow Cooking, making candy, etc., or for any other cooking that
requires precise control of temperature over time. Order part
number JXSOUSV1 from your GE Dealer.
Specification Created 1/15
Loading...