TM
ToolSmart
App
Instruction Guide
Digital Multimeter
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Multimeter Pairing
Press the Bluetooth button to turn on
Bluetooth. Device will beep and “B” will
appear solid on screen.
2
1
Turn the yellow dial to
turn on device.
3 4
Tap Toolbox
button
button
5 6
Tap ConnectTap DMM
Wait for
phone and
DMM to pair
Multimeter Dashboard
Upon connecting, data
will automatically
stream to your phone
1
2 43
Press the save button to
store the data
Set upper and lower limits to quickly tell
if your measurement is out of range
As you turn the dial on the multimeter,
the app screen automatically adjusts to
display the current function
Multimeter Ohm’s Law Calculator
1 32
Press the calculator
button
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Click and drag the measurements from
the data bank below. Drop them in the
above fields. Fill in any two and the third
will calculate automatically. Values can
also be manually typed into these fields.
View the
results
Multimeter Average Temperature Calculator
Select how many
temperatures you would
like to average
2
1 43
Press the calculator
button
Click and drag the measurements from
the data bank below. Drop them in the
above fields. Values can also be manually
typed into these fields.
View the
results
Taking a Picture for Multimeter
From the dashboard, tap
the camera button in the
bottom center of the
screen to access the
camera.
2
You could elect to take a
new photo or choose
one from your phone’s
gallery.
31
When taking a photo, tap the circular
capture button on the bottom center
of the screen. If necessary, tap the
lightning bolt button in the top left
corner of the screen to adjust the
camera’s flash. Tap the flip camera
button in the top right corner of the
screen to activate the front facing
camera (“selfie mode”).
4
Finally choose whether to
keep the photo that was
taken or retake a new photo
by tapping one of those
options in the bottom corners
of the screen.
Multimeter Picture Gallery
1 2 3 54
From the
dashboard, tap the
gallery button in the
lower left corner of
the screen
Tap the photo you
would like to add
your
measurements to.
Tap somewhere on the
picture to place a box
for values to be
entered. The box can be
moved by tapping it and
dragging it. Custom
values may be entered
by double tapping the
box. To input previously
saved measurements,
see next step.
Tap the button on the bottom center
to display your previously logged
measurements. Then swipe the bar
with the values to scroll through, tap
and drag that value to the desired box
(value is entered when the box turns
orange). To change the direction of the
arrow on the box, click the box so it
turns orange and tap the direction you
would like the arrow to point (tap
outside but close to the box).
When all measurements
are finalized, save your
new picture to the gallery
by tapping the save
button in the bottom
right corner of the page.
Boxed values can be
deleted by tapping them
so they turn orange and
hitting the “X”.
Universal App Settings
1 32
Click the Hamburger
Menu (triple bar button)
at the top left corner of
the page.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Tap the settings button
From here, you can change the units of
measurement (which applies to all tools),
have the captured images save to the
phone’s gallery, and view the terms &
conditions and privacy policy.
Loading...