Generac Power Systems GenTran 6294, GenTran 6295, GenTran 6408, GenTran 6296 Specifications
Manual Transfer
Switch Kits
30 AMP and 50 AMP KITS
For Portable Generators
Manual Transfer Switch Kits
1 of 2
30 AMP Pre-wired
Model 6294
30 AMP
Model 6295
30 AMP Pre-wired
Model 6408
50 AMP
Model 6296
features
Safe: Mechanically interlocked generator and utility breakers prevent dangerous backfeeding to
avoid injuring utility line workers.
Easy to Maintain and Expand: Interchangeable type circuit breakers make it easy to reconfigure,
replace, or expand the circuits in your switch.
Powers Hard-wired Circuits: Directly powers hard-wired appliances such as your furnace, well
pump, and septic pump.
Fast, Flexible Installation: Suitable for surface or flush mounting. Kits include necessary
components.
30 AMP and 50 AMP KITS
30 AMP Pre-wired 30 AMP 50 AMP
Model # 6294 6408 6295 6296
Circuits Provided 6 6 10 12
Max # Circuits 10 10 16 16
Max Amps @ 240V 30 Amp 30 Amp 30 Amp 50 Amp
2 - 15 Amp 1-pole
Included Breakers
Required Main Breaker in
Load Center
(provided by installer)
Male Inlet Configuration
Power Inlet Box
Switch Enclosure Type NEMA 1 NEMA 1 NEMA 1 NEMA 1
Switch Dimensions 9-1/4" W x 11-1/8" H x 3-3/8" D 9-1/4" W x 11-1/8" H x 3-3/8" D 14-3/8" W x 11-1/2" H x 3-3/8" D 14-3/8" W x 11-1/2" H x 3-3/8" D
Shipping Dimensions 16" W x 14" H x 7" H 16" W x 14" H x 7" H 16" W x 14" H x 12" H 16" W x 14" H x 12 " H
Shipping Weight (lbs). 19 20 32 36
2 - 20 Amp 1-pole
1 - 20 Amp 2-pole
60 Amp 2-pole 60 Amp 2-pole 60 Amp 2-pole 100 Amp 2-pole
L14-30
NEMA 3R
2 - 15 Amp 1-pole
2 - 20 Amp 1-pole
1 - 20 Amp 2-pole
L14-30
NEMA 3R
3 - 15 Amp 1-pole
3 - 20 Amp 1-pole
1 - 20 Amp 2-pole
1 - 30 Amp 2-pole
L14-30
NEMA 3R
3 - 15 Amp 1-pole
3 - 20 Amp 1-pole
1 - 20 Amp 2-pole
1 - 30 Amp 2-pole
1 - 50 Amp 2-pole
CS6365
NEMA 3R
Manual Transfer Switch Kits
2 of 2
UPC codes 696471062946 696471064087 696471062953 696471062960
Kit Contents
Compatible With
• Transfer Switch: 30 Amp for
surface mounting
• Cord: 10' 10/4 with L14-30 ends
• Power Inlet Box: 30 Amp resin
(must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
• Transfer Switch: 30 Amp for
surface mounting
• Cord: 10' 10/4 with L14-30 ends
• Power Inlet Box: 30 Amp
aluminum (must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors, 20 Amp L14-20 plug
For use with generators equipped with
30 Amp outlets such as:
GP3250, LP3250, XG4000, XP4000,
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
•
Transfer Switch:
flush or surface mounting
•
Cord:
10' 10/4 with L14-30
male and female ends
•
Power Inlet Box:
aluminum (must be hardwired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
GP5500, GP6500E, GP7500E,
XG6500, XG7000E, XG8000E,
XP6500E, XP8000E
30 Amp for
30 Amp
•
Transfer Switch:
flush or surface mounting
•
Cord:
and CS6364 50 Amp locking
female
•
Power Inlet Box:
aluminium (must be hard wired)
• Install manual, wiring harness,
conduit and fittings, wire
connectors
For use with generators equipped
with 50 Amp outlets such as:
NOTE: XP units require the 30 Amp Switch Neutral Kit - Model 6297
30 Amp Switch Neutral Kit - Model 6297
*Enables manual transfer switches to isolate the utility and generator neutrals.
50 Amp for
10' 6/4 with 14-50 male
50 Amp
GP15000E
GP17500E
XG10000E
Kit Contents
• Prewired Contactor, UL listed
• Wire Harness
• Wire Connectors (3)
• Insulated 8-position terminal block
• For use with 30 Amp Manual Transfer Switches
®
Generac Power Systems, Inc. • P.O. Box 8, Waukesha, WI 53187 • generac.com
©2012 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0195040SBY-D / Printed in U.S.A. 09/24/12
*Mounts inside the switch
Loading...