¡ INNOVATIVE DESIGN & PROTOTYPE TESTING are key components
of GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it
doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose GENERAC POWER SYSTEMS with the confidence that these
systems will provide superior performance.
¡TEST CRITERIA:
PROTOTYPE TESTED NEMA MG1-22 EVALUATION
SYSTEM TORSIONAL TESTED MOTOR STARTING ABILITY
¡ SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
This state-of-the-art power maximizing regulation system is standard on
all Generac models. It provides optimized FAST RESPONSE to changing
load conditions and MAXIMUM MOTOR STARTING CAPABILITY by
electronically torque-matching the surge loads to the engine.
Not for sale in CA
¡SINGLE SOURCE SERVICE RESPONSE from Generac’s dealer network
provides parts and service know-how for the entire unit, from the engine
to the smallest electronic component.
¡ PURPOSE BUILT FOR RENEWABLE ENERGY APPLICATIONS.
Designed specifically to interact with off-grid renewable energy
applications, Generac introduces the first generator intended for
alternative energy interaction. Capable of tying into an inverter and
battery storage system to supplement the alternative energy source.
This provides the cleanest running, low emission solution to recharging
house batteries.
¡ EXTENDED RUN CAPABILITY. This innovative oil circulation system
extends the maintenance intervals by an unprecedented 5 times the industry
standard by offering 500 hour maintenance intervals.
2 of 4
®
EcoGen™ - 6 kW features and benefits
6kW
Engine
•Generac (OHVI) DesignMaximizes engine “breathing” for increased fuel efficiency. Plateau honed cylinder walls and plasma moly rings
helps the engine run cooler, reducing oil consumption resulting in longer engine life.
•“Spiny-lok” cast iron cylinder wallsRigid construction and added durability provide long engine life.
•Electronic ignition/spark advance These features combine to assure smooth, quick starting every time.
•Full pressure lubrication systemPressurized lubrication to all vital bearings means better performance, less maintenance and longer engine life.
•Low oil pressure shutdown systemSuperior shutdown protection prevents catastrophic engine damage due to low oil.
•High temperature shutdownPrevents damage due to overheating.
•Spin-on automotive type oil filterCaptures and collects harmful impurities with easy serviceability.
•Oil circulatory systemExtends maintenance intervals to 500 hours and virtually eliminates oil degradation.
Generator
•Revolving field
•Displaced phase excitation
•Automatic voltage regulationRegulates the output voltage to ±2% prevents damaging voltage spikes.
•UL 2200 ListedFor your safety.
Allows for a smaller, light weight unit that operates 25% more efficiently than a revolving armature generator.
Maximizes motor starting capability.
Controls
•Auto/Off/Manual switchSelects the operating mode.
•2-wire start/Inverter connectionAllows the generator to be started by a two wire signal.
•Battery sentinelThis smart system only charges the battery when needed, prolonging battery life.
•Main Line Circuit BreakerProtects generator from overload.
Rated Maximum Continuous Power Capacity (LP)6,000* Watts
Rated Voltage120 VAC (240 VAC capable w/kit)
Rated Maximum Continuous Load Current – 120 VAC50 Amps (25 @240 VAC)
Main Line Circuit Breaker50 Amps (25 after conversion)
Phase1
Number of Rotor Poles2
Rated AC Frequency60Hz
Power Factor1
Battery Requirement (not included) Group 26R 12 Volts and 525 Cold-cranking Amperes Minimum
Unit Weight (Pounds/Kilos)387/175.5
Dimensions (L x W x H) Inches/mm48 x 25 x 29 [1218 x 638 x 732]
Sound output in dB(A) at 23 ft. with generator operating at normal load52
Engine
Type of EngineGENERAC OHVI
Number of Cylinders2
Displacement530cc
Cylinder BlockAluminum w/Cast Iron Sleeve
Valve ArrangementOverhead Valve
Ignition SystemSolid-state w/Magneto
Governor SystemElectronic
Compression Ratio9.5:1
Starter12 Vdc
Oil Capacity Including Filter (quarts/liters)1.7Q/1.6L
Oil Reservoir Capacity (quarts/liters)4.2Q / 4.0L
Operating RPM2,600
Fuel Consumption
Liquid Propaneft3/hr (gal/hr)
1/2 LoadFull Load
Required fuel pressure to generator fuel inlet at all load ranges - 11 to 14 inches of water column for LP gas
For Btu content, multipy ft3/hr by 2520
30.8/0.85
48.2/1.32
6kW
3 of 4
Controls
2-Line Plain Text LCD DisplaySimple user interface for ease of operation.
Mode Switch
-Auto Puts unit in standby mode, waiting for inverter start call.
-OffStops unit. Power is removed. Control and charger still operate.
-Manual/Test (start)Start with starter control, unit stays on.
Starter Lock-outStarter cannot re-engage until 5 sec. after engine has stopped.
2.5 Amp Smart Battery ChargerStandard
Automatic Voltage Regulator w/Overvoltage ProtectionStandard
Automatic Low Oil Pressure ShutdownStandard
Overspeed ShutdownStandard, 72HzHigh Temperature ShutdownStandard
Overcrank ProtectionStandard
Safety FusedStandard
Low Battery ProtectionStandard
50 Event Run LogStandard
Internal Fault ProtectionStandard
Rating definitions - Standby: Applicable for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with BS5514,
ISO3046 and DIN6271). * Maximum wattage and current are subject to and limited by such factors as fuel Btu content, ambient temperature, altitude, engine power and condition, etc. Maximum power
decreases about 3.5 percent for each 1,000 feet above sea level; and also will decrease about 1 percent for each 6° C (10° F) above 16° C (60°F). Sound output ratings from certain points on the generator
subject to change based on installation parameters.
®
EcoGen™ - 6 kW available accessories
TRANSFER
SWITCH
8KW - 17KW
(IF SUPPLIED)
TRANSFER
SWITCH
20KW
(IF SUPPLIED)
H1
W1
W2
H2
H1
W1
W2
6kW
Model #ProductDiscription
®
4 of 4
581926R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the
recommended 26R wet cell battery for use with all air-cooled standby product.
The fascia base wrap snaps together around the bottom the new air-cooled
5839Fascia Base Wrap Kit
generators. This offers a sleek, contoured appearance as well as offering protection
from rodents and insects by covering the lifting holes located in the base.
5703Paint KitBisque Kit
6004Scheduled Maintenance Kit
6016240V Conversion Kit
Generac's scheduled maintenance kits provide all the hardware necessary to
perform complete routine maintenance on a Generac automatic standby generator.
As off-grid energy systems continue to grow in size and capacity, it is becoming
more common to have a 240V instead of 120V only. This conversion kit allows
the EcoGen to be converted easily from a 120V system to a 240V system and still
maintain a full 6kW output.
dimensions
Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
637.6
[25.1]
1218
[47.9]
731.9
[28.8]
EcoGen Series
642
[25.3]
LEFT SIDE VIEW
76.2 [3.0]
PEA GRAVEL
MINIMUM
1226
[48.3]
FRONT VIEW
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com