Continuing the tradition of providing well fac-
tored active monitoring products, Genelec
x D x H). The 8030.LSE PowerPak™ system is
toring system or upgrading an existing stereo
Acousti/Tape™ frequency/wavelength mea-
technology. Designed for multi-channel pro-
fessional surround sound monitoring envi-
features a single 10” proprietary driver with
well as a discrete LFE signal input with a
frequency components, accurately dividing the
the LFE channel in 5.1 and 6.1 digital surround
featuring Genelec’s proprietary Minimum Dif-
fraction Enclosure™ (MDE™). The rounded
fiers, the Genelec 8030A monitors offer a
wide frequency response of 58 Hz to 20 kHz
tweeter. In addition to low harmonic distortion,
the 8030A also offers rear panel bass and
treble tilt room response controls. The MDE™
tors is made of die cast aluminum, featuring
when used in close proximity to video monitors.
tener for best sound reproduction. The isolation
feature prevents colouration caused by conduc-
tion of unwanted vibration to the mixing console
PowerPak
Data Sheet
Genelec 8030.LSE PowerPak™
Multi-Channel Monitoring System
8030.LSE PowerPak™ Data Sheet
Input 7 XLR female (6 Main + 1 LFE)
Output 7 XLR male (6 Main + 1 Su m Out)
XLR pin sequence pin 1 gnd
Test tone for phase adjust ment 85 Hz
< 2 % < 2 % (50...150 Hz)
19 mm (3/4”) dome tweeter
Weight 26 kg (57 lbs) 5.6 kg (12.3 lbs)
Height 52 7 mm (20 3/4”) 299 mm (11 13/16”)*
Width 462 mm (18 316”) 189 mm (7 7/16”)
Depth 360 mm (14 3/16”) 178 mm (7”)
*Including Iso-Pod™ table sta nd
Amplifier system distorti on
or 115 /230 V according according to region
7060A BASS MANAGEMENT SY STEMSYSTEM SPECIFIC ATIONS
AMPLIFIER SECTI ON
8030.LSE POWERPAK A COUSTIC SPECIFICATIONS